Wheel Lift Attachments and Adapters

Wheel lift attachments and adapters expand the versatility of towing equipment. Designed to fit a range of vehicles, they ensure secure and efficient lifts. Built for strength, they withstand the stress of heavy-duty recovery operations. These accessories are essential for professional towers.

Sort by

Miller Bus Lift Eye Attachment

The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.

$367.99 – $877.99

Miller Fork Spacer Set

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

$233.99

Miller Short Axle Fork - 5" Wide Opening

This Short 5" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

$253.99 – $445.99

Miller Medium Axle Fork - 5" Wide Opening

This cast steel alloy Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.

$268.99 – $472.99

Miller Dual Fork Receiver Set

Miller Industries newly redesigned and field-tested dual fork receiver set offers heavy-duty tow operators the advantage of four fork positions on their crossbars, allowing them to achieve the desired clearance and weight distribution on their underlifts during front-pick tows.

$2,499.99 – $4,013.99

Miller Tall Axle Fork - 5" Wide Opening

Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 5" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.

$346.99 – $617.99

Miller U-Bolt Lifting Attachment Set

This U-Bolt Lifting Attachment is designed for faster and easier rear hookups on many tractors. The attachment is centered on one of the rear U-bolts on each side and then the underlift is raised. The U-bolt attachment lifts on the bolt saddle while the U-bolt and nut guide it into position. These attachments are designed for Rear Lift Only. 1 Pair Included in Kit.

$628.99

Miller Offset Chain Hook Adapter Version 2 for Dual Fork Holders

Miller Industries has improved the design of its offset chain hook adapter by adding a second pin for stability and reinforcing the chain hook block for additional strength. This updated version now slides into two holes on a heavy-duty fork holder found on 5" x 5" crossbars on Century, Vulcan and Holmes underreaches.

$1,296.99

Miller Universal Fork Holder, 3.5"x4"

Miller offset fork adapter for 3.5" x 4" crossbars. This fork adapter is commonly used on Vulcan V30 Wreckers.

$736.99

Miller Chain Hook Adapter Set

Miller Industries chain hook adapter kit. These chain hook tow bar adapters are specifically designed to fit the cast profile fork holders of Century and Vulcan Heavy Duty Wreckers. They are used when lifting a load when chains are required. For more versatility they may moved back and forth on the crossbar to fit the size of the load being picked up. Sold as a pair.

$1,029.99

Miller Volvo Axle Fork Set - 8" Wide Opening

Miller Industries Specially designed for lifting the Hendrickson Airtek/Steertek front axle is the hollow beam lifting fork. Special care must be taken when lifting the air suspension hollow beam front axles currently being used on many of the Volvo VNT and Freightliner Century Tractors making this fork or a front tire lift a must.

$817.99

Miller Heavy Duty Tire Lift Attachment Crossbar

To expand your lifting capabilities your Century can be equipped with the optional wheel lift grid system. This system is available to fit the 4", 5", and 6" crossbars. It is capable of towing vehicles from both the front and rear axles, in either single or dual tire applications. It offers versatility, with a wide range of adjustment for nearly all sizes of tire, as well as axle widths.

$5,141.99 – $5,828.99

Miller Medium Offset Axle Fork Set - 6" Wide Opening

These 7.25" Medium Round Axle Forks from Miller Industries are used to pick up the axle or frame of a truck. They have a 7.25" wide opening, 2" diameter shaft, and 6.5" between the fork holder and the bottom of the cutout.

$582.99

Miller 5" x 5" Crossbar Riser Bracket Set

These Riser Brackets from Miller Industries are used when extra height is needed while towing. The riser brackets are manufactured in a welded design and incorporate a 1/2" grab hook welded to one side. With these brackets you will gain an extra 8.5" of height. Brackets will fit on a 5" x 5" heavy duty crossbar. These Riser Brackets are standard on 9055, Option for FIIIT, SDU, 5130, 5230 and 7035. Storage brackets for these riser brackets are not included.

$1,346.99

Miller Riser Bracket

This Riser Bracket is standard on all rotators and optional of all other models. This riser bracket fits on a 4" crossbar. Sold as pair.

$1,148.99

Miller Vulcan V-30 Fork Holder 3.5" X 4" Universal

These fork holders are designed to fit a 3.5" x 4" crossbar. They are a universal style fork holder and are commonly used with the Vulcan V-30 Medium Duty Wreckers.

$1,200.99

Miller Fold Down Bus Lift Storage System

This Miller Industries Tire Lift Storage Bracket folds down for easy access to either Part Number

$1,009.99

Miller Fork Adapter for 3" X 3" Crossbar Fork Holder

This is a replacement 3" x 3" fork adapter.

$371.99

Miller Ball Bracket Trailer Hitch Adapter (Century F6500 / DFT-650)

This Trailer Hitch Adapter from Miller Industries is used on a Century Formula 6500 and Holmes DFT-650 Wheel Lift. It allows you to tow a trailer with a ball type hitch behind your wheel lift. This adapter installs quickly and it is small enough to fit in your toolbox when it is not being used.

$382.99

Miller Forklift to Wheel Lift Attachment

The Eagle Fork-lift Attachment. Fast, damage free, car moving machine. Turns a forklift into a fast efficient yard truck! Move cars quickly from parking spots, within storage yards or salvage lots. All you need is a forklift. Just slide the forks into the receivers and you are ready to go. No hydraulics just a simple rotating mechanism which wraps around the car tires!

$6,289.99

Miller 4" x 4" Crossbar Riser Bracket 8" Lift

This riser bracket is for a 4" by 4" crossbar used on a Century 3024 and 4024. They accept most 2" diameter forks and are used when extra height is needed for towing.

$605.99

Miller Offset Fork Holder Set for 4" x 4" Crossbar

These Low Profile Fork Holders are designed to fit a 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products . This fork holder set includes the right and left hand sides.

$2,298.99

Miller Fifth Wheel King Pin Adapter 16 Ton Wreckers

This is a Miller Industries Pintle Hook and Fifth Wheel Adapter Kit. It is designed specifically for Miller 16 ton wreckers including the Vulcan V-30, Century 3212, Vulcan V-24 and Holmes 600R. It fits a 3" x 4" crossbar.

$1,949.99

Miller Trailer Hitch Adapter Ball Bracket Formula I

This Trailer Hitch Adapter from Miller Industries is used on a Century Formula I Wheel Lift that was made after March of 1996. It allows you to tow a trailer with a ball type hitch behind your wheel lift. The Hitch installs quickly and it is small enough to fit in your tool box when it is not being used. Also fits a Holmes DFT-400 and Challenger I-400 Wheel Lift.

$382.99

Miller Reese Receiver Adapter (Gen 1 Car Carrier Wheel Lifts)

This Reese Receiver Wheel Lift Adapter from Miller Industries is used on Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series, 12 Series LCG and 16 Series LCG GEN1 built before Sept. 2016 standard wheel lifts. All of the mounting hardware is included on this adapter. For a complete Pintle Hook Receiver Kit see part # ZP-CC-PHK. This part can be used to replace Part Number 12-0809073.

$540.99

Miller Chain Hook End Caps (4024), 4" Crossbar

Miller Industries Hook End Cap. Fits a Century 4024 Wrecker with a 4" crossbar. Sold as Pairs.

$726.99

Miller Offset Fork Holder

This is an offset fork holder from Miller Industries. These forks come on 25 ton and larger wreckers. This offset fork holder fits a 5" crossbar. Sold as pair.

$1,649.99

Miller End Cap Chain Adapter (16 Ton Wreckers)

Miller Industries End Cap Chain Hook Adapter for Vulcan V30, Century 3212, and Holmes 600R 16 Ton Wreckers with low profile 3" x 4" crossbar.

$384.99

Miller Curved Axle Fork Set

This replacement Curved Axle Fork Set from Miller Industries features a short front lead fork to easily fit under an axle. The rounded inner design fits nicely around the axle.

$931.99

Miller 16 Ton Wrecker Riser Bracket Set

These Miller riser brackets can be used on the Vulcan V30, Century 3212, and a Holmes 600R 16 Ton Wreckers. These risers are 7" that are mainly used when extra height clearance is needed for towing.

$2,135.99

Miller 25,000 lb. (50 - 75 Ton) Tire Lift

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

$6,716.99

Century Trailer Ball Adapter Formula 1 Wheel Lift

This trailer hitch adapter is for Century Formula 1 Wheel Lifts. It was manufactured before March of 1996. This adapter will allow you to tow a trailer with a ball type hitch behind your wheel lift. It installs quickly and is small enough to fit into your tool box with it is not in use. This hitch adapter comes with a 2" trailer ball, mounting bolts and a primed adapter. This trailer ball adapter also fits Holmes DFT-400 and Challenger I-400 wheel lifts that were manufactured before March of 1996 and Century/Champion car carriers that were manufactured before January 2000.

$280.99

Miller 6,000 LB Tire Lift Kit (4" x 4" Crossbars)

Miller Industries 6,000 Lb. Tire Lift System To Fit a 4" x 4" Crossbar. Fits 1624, CH20, 4024 Wrecker Models.

$4,110.99

Miller Tunnel Box Fork Holder Kit

Store your forks with this Fork Holder Storage Kit. This storage kit can be used on a 36" OR 48" Tunnel Box.

$1,004.99 – $1,174.99

Miller 16 Ton Fifth Wheel Assembly

This fifth wheel assembly from Miller Industries is used with 16 Ton Wreckers Pintle Hitch Adapters. This kit includes quick pin, handle grip, linch pin, 5th wheel bracket, lock pin and pivot pit adapter.

$862.99

Miller Heavy Duty "Euro" Style Bus Lift 5" x 5" Crossbar

Miller Industries has begun manufacturing a Tire Lift System for the North American market that was originally pioneered by Boniface Engineering of England several decades ago. This attachment will only be available with units offering the 5 x 5 crossbar. It is capable of towing vehicles from both the front and rear axles, in either single or dual tire applications. It offers versatility, with a wide range of adjustment for nearly all sizes of tire, as well as axle widths.

$5,623.99

Miller Offset Fork Holder Extensions

The extensions were designed to provide extra width out of the lift fork adapters when needed. Place the extensions into the fork adapters, install the retaining bolts, slide to the desired width and it's ready to tow. Extensions sold by the pair and will only fit the low profile cast fork holders.

$1,391.99

Miller Lift Fork Riser Set

Miller Industries Fork Risers for a 614. Fits a 3.5" x 3.5" Crossbar.

$850.99

Miller Offset Fork Set 6"

Miller Industries Offset Fork Adapter. This fork adapter will fit SDU units with a 6"x6" crossbar.

$1,164.99

Miller Heavy Duty Tire Lift Storage Bracket (XP850 Side Puller)

This XP850 Bus Lift Storage System is from Miller Industries. Designed specifically for storage behind the XP850 Side Puller. Frame Mount. This system can be used with both

$2,760.99

Miller Towbar Adapter Chevron Autoloaders

These are towbar adapters that fit on the crossbar of a Chevron Autogrip wrecker by Miller Industries. These specialty attachments allow for proffessional and easy hookups when towing wrecked vehicles or trucks with steel bumpers. These adapters are sold as a pair and Chains are not included.

$1,431.99

Miller 25,000 LB Vulcan Bus Lift Kit

Retrofit Bus Lift Kit for a Vulcan. The XHD Tire Lift works on units already having a 5x5 fabricated crossbar.

$8,643.99

Miller Short Tapered Axle Fork - 2" Wide Opening

These Axle Forks from Miller Industries have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles.

$180.99 – $355.99

Miller Crossbar Fork Adapter Offset Fork Holder

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

$833.99 – $1,272.99

Miller Heavy Duty Fork Receivers T-Handle

Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.

$21.29

Miller Medium Axle Fork - 3" Wide Opening

This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

$207.99 – $378.99

Miller Tall Axle Fork - 3" Wide Opening

Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

$251.99 – $582.99

Miller Fork Adapter 3 1/2" x 3 1/2" Crossbar Fork Holder

These Fork Holders are designed to fit a 3 1/2" x 3 1/2" F6500 crossbar.The T-handles are sold separately part# 12-0306564. They are made from the same special cast steel alloy material as the other Miller products. This fork holder replaces part number 12-0712749.

$408.99

Miller Reese Receiver Adapter (Gen 2 Car Carrier Wheel Lifts)

This Reese Receiver Wheel Lift Adapter from Miller Industries is used on GEN2 Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver/towball tongue. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series,12 Series LCG and 16 Series GEN2 LCG 4K standard wheel lifts. All of the mounting hardware is included on this adapter. This part can be used to replace Part Number 12-0905029.

$539.99 – $540.99

Miller Auto-Load Trailer Ball Adapter Kit

This Trailer Hitch Adapter from Miller industries is for the Century 300 series Express. It allows you to tow a trailer with a ball type hitch behind your wheel lift.

$382.99 – $457.99

Miller 5th Wheel Plate Attachment (Heavy Duty Wreckers)

This adapter requires

$768.99

Miller Trailer Ball Adapter

Miller Industries has now made it possible to tow ball type trailers with your heavy duty wrecker. This trailer ball adapter mounts on the

$331.99

Miller Tall Axle Fork- 4.5" Wide Opening

Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 4-1/2" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.

$323.99 – $617.99

Miller Pintle Hook Adapter HD Wreckers

Note: Special Handling Fees Apply

This Pintle Hitch and Fifth Wheel Adapter from Miller Industries is designed to fit into the cast steel fork receivers. This will increase the versatility of your towing unit. Install it into the fork holders from the top of the wheel plate, or from the bottom using the King Pin Adapter. It also includes a Pintle Hook rated at 15 tons for maximum capacity when towing. This hitch also works as an adapter for the Miller Trailer Fifth Wheel Plate Part #124001833 and the Miller King Pin Attachment Part #124001948. (Does Not Fit 3212/V30) Shipped Loose. Fifth Wheel Plate and King Pin Attachments Not Included.

Use from the top of your fork holders with the 124001833 fifth wheel plate adapter
Use from the bottom of your fork holders with the 124001948 king pin adapter
Includes a pintle hook rated at 30,000 lbs. for towing

$1,163.99

Miller Industries LCG30S 3" Short Frame Fork

3" short fork frame

$185.99

1 - 55 of 55 items

Wheel Lift Attachments and Adapters Buying Guide

Maximize the versatility and efficiency of your towing operations with high-quality wheel lift attachments and adapters. At Zips.com, we carry a wide selection of forks, axle brackets, and U-bolt lifting attachments from trusted brands like Miller, Bro Wreckers, AW Direct, and Zips, designed to help tow a broad range of vehicles safely and efficiently.

Why Choose Wheel Lift Attachments and Adapters

Wheel lift attachments expand the capability of your wheel lift system, allowing you to handle vehicles of different sizes, axle types, and wheel configurations. These adapters and forks distribute weight evenly and provide secure lifting points, reducing the risk of damage to the vehicle being towed.

Whether you’re lifting compact cars, heavy-duty trucks, or specialty vehicles, using the right attachment ensures safe towing and streamlined operations. Modern forks and adapters are made from reinforced steel and precision-engineered for durability, longevity, and ease of use.

Best-Selling Models and Top Brands

Zips.com features top-performing wheel lift attachments from industry leaders:

Bro Wreckers Volvo Axle Bracket Fork: Ideal for Volvo trucks, this axle bracket fork provides secure lifting points and durable construction for reliable towing performance.
Zips Short Axle Fork - 4.5" Wide Opening: A versatile fork designed for quick, easy attachment to various axle types, perfect for everyday towing needs.
Miller Short Tapered Axle Fork - 2" Wide Opening: Compact and precise, this tapered fork fits tighter axles while maintaining full lifting strength.
AW Direct U-Bolt Lifting Attachment: Provides a secure connection for U-bolt-equipped axles, expanding the range of vehicles you can tow safely.

These attachments are designed to enhance your towing fleet’s versatility, allowing you to handle different vehicle types without compromising safety or efficiency.

Shopping Guide: Choosing the Right Wheel Lift Attachment

Selecting the right wheel lift adapter or fork depends on your towing needs and the vehicles you service. Consider the following:

Vehicle Compatibility: Identify the types of vehicles you tow most frequently and select forks or adapters designed for those axles and wheel configurations.
Fork Style and Width: Forks come in short, long, tapered, or wide-opening styles. Choose the style that best fits the wheel and axle dimensions of your typical tows.
Material and Durability: High-strength steel construction ensures long-lasting performance, even under repeated heavy-duty use.
Attachment Type: Axle forks, U-bolt adapters, and bracket forks each serve different towing scenarios. Match the attachment type to the vehicle and lifting requirements.
Ease of Use: Quick-attach designs and standardized fittings simplify installation and removal, saving time during roadside recovery or fleet operations.

Choosing the proper wheel lift attachment ensures a safe and damage-free towing experience while maximizing operational efficiency for your service fleet.

FAQ: Wheel Lift Attachments and Adapters

What are wheel lift attachments used for?
Wheel lift attachments are used to adapt a wheel lift to various vehicles, providing secure lifting points for towing cars, trucks, or specialty vehicles.

How do I choose the right fork or adapter?
Select attachments based on axle type, vehicle size, fork width, and lifting requirements. Check compatibility with your existing wheel lift system.

Are wheel lift adapters safe for heavy-duty towing?
Yes, when properly rated and used according to manufacturer specifications, these attachments provide a secure and safe towing solution for heavy-duty vehicles.

Can one wheel lift handle multiple attachment types?
Yes, most wheel lifts are compatible with a variety of forks and adapters, allowing you to tow different vehicle types without needing multiple lifts.

How should I maintain my wheel lift attachments?
Regularly inspect for cracks, bent components, or worn areas. Clean after use, lubricate moving parts as needed, and store in a dry area to prolong lifespan and maintain safety.