Keep your freight where it belongs with cargo straps from Zipʼs. We stock full ratchet strap assemblies with various hook attachments and also carry replacement winch straps. Check out three of our best-sellers below and follow these basic steps to secure your next load.
Zipʼs ratchet strap assemblies equipped with Double J hooks offer versatility for a variety of hook placements on your trailer. They can be secured along the side or bottom of the frame rail or fit into a pocket or D-ring located on the deck of the trailer. Installation is pretty straightforward. Just remember to take up the slack before ratcheting down and add a twist in the webbing to hold up better in the wind.
Zipʼs Ratchet Tie-Down Assembly w/ Double J Hooks | #: ZIPS-CSDJ
Zipʼs Cargo Tie-Down Assembly with Double J Hooks features double-line webbing to ensure full working load limit (WLL) capacity and dependable ratchet hardware to maintain cargo control. Each assembly includes two double-J hooks, standard ratchet hardware, an 18” short strap and various lengths for the adjustable end.
|
Keep your ratcheting mechanism lubricated to extend its life and usefulness. We recommend using WD-40 or your preferred spray lubricant.
|
Zipʼs tie-down assemblies with flat hooks create greater surface contact at the hook point but offer fewer connection options than other hook styles. To install, square up the flat hook to the frame rail connection point. Ensure full contact and pull strap tight over freight. Take up slack and winch securely.
Zipʼs Ratchet Tie-Down Assembly w/ Flat Hooks | #: CS4-15FF
Zipʼs Cargo Tie-Down Assembly with Flat Hooks features double-line webbing to ensure full working load limit (WLL) capacity and dependable ratchet hardware to maintain cargo control. Each assembly includes two flat hooks, standard ratchet hardware, an 18” short strap and various lengths for the adjustable end.
Gain additional tie-down points with this assembly from Zipʼs. The chain tail and attached grab hook offer flexible securement options for your freight. To begin, locate the appropriate chain pocket on deck of trailer. Secure either with grab hook or chain link. Pull the strap tight over freight, take up slack and winch securely.
Zipʼs Ratchet Tie-Down Assembly w/ Chain & Grab Hooks | #: ZWL-KITD12
Zipʼs Cargo Tie-Down Assembly with Chain and Grab Hooks features double-line webbing to ensure full working load limit (WLL) capacity and dependable ratchet hardware to maintain cargo control. Each assembly includes two grab hooks with 12” chain end, standard ratchet hardware, an 18” short strap and various lengths for the adjustable end.
|
Straps tend to wear out before the ratchet so replacement winch straps are available for sale separately at Zips.com.
|
Available in three sizes.
Featuring abrasion-resistant webbing, Zip's straps are available in 2", 3" and 4" widths with lengths from 15' to 36'. Working load limits (WLL) vary as well.
Can’t find what you’re looking for?
We have straps for every scenario.
Shop all Cargo Straps
