Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Buyers Products Tall Flush Mount T-Handle Latch with Blind Studs comes with a
lock and key set installed, and gasket. The latch is constructed from stainless
steel for durability and corrosion-resistance, and features a durable, folding
T-handle. Blind studs, included gasket, and flush-mount design provide for a
water-tight installation. The cam can adjusts from 1-1/4 in. to 2 in to
accommodate varying door thicknesses. The latch is shaped and sized to
accommodate tall T-handle cut-outs, and many Buyers Products rotary paddle
latch cut outs.
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Endless synthetic slings are made from a continuous loop of polyester and jacketed in a double layer of polyester. Internal red warning fibers alert you of damage should the sling become torn or damaged.
Buyers Products R38D Series Control Cable with 5 Inch Travel features a
corrosion resistant stainless steel core to ensure long life. The cable has 5
in. of total travel with no neutral detent.
Can be easily customized by cutting conduit and core wire. It includes a small
clamp to secure the output end for added stability, and a 2 in. control knob.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
Zip's Wheel Lift Strap with a D-Ring is perfect for securing vehicles on a
wheel lift of a tow truck. This durable strap is available in six lengths and
features abrasion-resistant webbing. This strap has a width of 2" and can be
used in many other securement applications.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
Adjust the throttle for your PTO from inside the cab with this covered cable
from Buyers Products. Pull the handle out until you've reached the desired
idle, and then turn 90? to the right to lock it. Reverse the procedure to
release.
Buyers Products R38D Series Control Cable with 5 Inch Travel features a
corrosion resistant stainless steel core to ensure long life. The cable has 5
in. of total travel with no neutral detent.
Can be easily customized by cutting conduit and core wire. It includes a small
clamp to secure the output end for added stability, and a 2 in. control knob.
This PTO Cable Mount Kit from Muncie is for low friction PTO Cables, single
gear Muncie PTO's and some Chelsea PTO's. It is also for 1/4"-28 thd and
5/16"-24 thd Control Cables.
Adjust the throttle for your PTO from inside the cab with this covered cable
from Buyers Products. Pull the handle out until you've reached the desired
idle, and then turn 90? to the right to lock it. Reverse the procedure to
release.
Buyers Products R38D Series Control Cable with 5 Inch Travel features a
corrosion resistant stainless steel core to ensure long life. The cable has 5
in. of total travel with no neutral detent.
Can be easily customized by cutting conduit and core wire. It includes a small
clamp to secure the output end for added stability, and a 2 in. control knob.
This PTO Cable Mount Kit from Muncie is for low friction PTO Cables, single
gear Muncie PTO's and some Chelsea PTO's. It is also for 1/4"-28 thd and
5/16"-24 thd Control Cables.