Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
ITI Yellow Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates willdrastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
This 36" Wireless tow Light from TowMate comes with two built in 4.5" strobe
lights, and marker lights on each end of the bar. The light will provide you
with stop, tail, and turn signals in addition to the strobes. The strobes can
be activated by simply flipping a switch on the unit. This tow light system
also includes a transmitter, charge plug, and instructions. Choose from any
transmitter at no additional charge. The transmitter options include 4-PIN
Round, 4 PIN Flat, 6 PIN Round, 7 PIN Round (Standard), 7 PIN RV Style, and a
Hardwire Transmitter.
Available in Classic, Tower's Edge or Heavy Duty webbing these straps are 2
inches wide and come with a d-ring attached at one end. Wheel Lift Straps are
perfect for securing vehicles tires to any wheel lift.
Zip's Wheel Lift Strap with a D-Ring is perfect for securing vehicles on a
wheel lift of a tow truck. This durable strap is available in six lengths and
features abrasion-resistant webbing. This strap has a width of 2" and can be
used in many other securement applications.
This T-Handle from Miller Industries is used on the Crosstube and 3-way Pivot
Tire Restraint Assembly of Century Formula 6500 600 Series Wreckers, 15 Series
2 and 3 Car Carriers, and Champion Aluminum and Steel Car Carriers. It is also
used on the Crosstube Assembly of Century Modular 211 Wreckers. The roll pin
used with this T-handle is part number 14795.
This Plunger Pin Spring from Miller Industries is used on the Wheel Lift and
Tire Restraint Assembly of Challenger Car Carriers made from 2002 until now.
See the features below for a full list of carriers and see the brochure tab for
breakdowns.
This 3/16" x 1" Roll Pin from Fastenal replaces Part Number 9046310. This
Slotted Pin is made from steel and has a plain finish. It is used commonly used
Miller Vulcan Car Carriers in place of 9046310. See the features below for a
list of carriers, and see the brochure tab for breakdowns.
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This right hand end plate from Miller industries is used on the outer crosstube
assembly on various equipment from Miller Industries. This L-arm bracket is
used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of
the crosstube to allow your L-arm to pivot.
This 3/8" Lockwasher from Miller Industries was made with an internal tooth
design. It is used on many different assemblies including the outer crosstube
and tire restrain assembly of Car Carriers and the LDU/SDU4 assembly, underlift
assembly, outer crosstube assembly and the boom assembly of Wreckers. The Car
Carriers include Century, Champion and Vulcan, while the wreckers include
Century, Holmes and Vulcan. Please see the features below for a full list of
carriers and wreckers that this lockwasher is used on, and see the brochure tab
for breakdowns.
This Alignment Pin from Miller Industries is used on the Outer Crosstube
Assembly, and the Underlift Assembly of several Miller Car Carriers and
Wreckers. These include Century, Champion and Vulcan Car Carriers, as well as,
Century and Holmes Wreckers. Please see the features below for a list of
carriers and wreckers, and see the brochure tab for breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.