Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
This is the seal kit for the wheel lift tilt cylinder on the Century Formula
6500 - 600 Series light duty wrecker by Miller Industries. To view part
schematic click on the Brochure tab.
This is the Seal Kit for the Lift Cylinder on the wheel lift of the Century
Formula 6500 - 600 Series and Holmes 552 / DFT 650 light duty wreckers by
Miller Industries. The part number for the lift cylinder is 12-0303065. To see
which specific models this seal kit fits please see Features below. To view
part schematics click on the Brochure tab.
This Super Oilite Bushing from Miller Industries is used on the Wheel Lift Assembly of Century Formula 6500/600 Series Wreckers, Century Formula I Wheel Lift 411/611 Wreckers and Challenger 4700 Series Wreckers. See the attached brochures. This part can be used to replace Part Numbers: 12-0301583, 12-0301845, 12-0301382, and 12-0302093.
This is the Lift Cylinder Pin on the Wheel Lift for Century Formula 6500 - 600
Series and Century Modular 400 & 600 Light Duty Wreckers by Miller Industries.
This is the pin for the rod end of the lift cylinder. To view specific models
this pin will fit see Features below. To view part schematics click the
Brochure tab.
This is a replacement wheel lift upper arm pin weldment on Light Duty Century
and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift
upper arm weldment to the outer boom weldment of the wheel lift. This pin fits
the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also
fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click
the Brochures tab.
This is the Seal Kit for the Lift Cylinder on the Wheel Lift of a Challenger
4700 Series and a Holmes 440 Series / DFT 400 light duty wrecker by Miller
Industries. This seal kit is used on lift cylinder part number 12-0302341. To
view part schematics click on the Brochure tab.
This is a split plastic grommet by Miller Industries. This grommet has many
useful applications. It is used to protect electrical wiring installations from
chafing and wear. It helps to eliminate shorts and electrical failures. This
grommet is also used in the crossrod assembly on light duty wreckers. This
grommet acts as a bushing between the crossrod channel and the crossrods
themselves. To see which specific models this grommet is used on please see
features below. To view the part schematics click on 'Related Schematics'.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.