Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various
models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire
restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side.
This part can be used to replace Driver Side Part Nos. 12-00803911 and
12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
This black painted steel L-Arm bracket from Miller Industries attaches to the
drivers side crossbar on Vulcan 860 and 870 light-duty wreckers. Also known as
a tire restraint or wheel retainer, a wheel scoop attaches to the wheel lift
with this part and is held in place with a lock pin. The pin is not included.
Order Part No. 8700109 for the pin. Driver side (8701600) replaces Part No.
(8719440). Passenger side (8701500) replaces Part No. (8719340).
This is a strong, weldable Grade 70 grab hook. With the ability to handle a working load limit of 11,300 pounds, check the drop-down menu for more information, the All-Grip Weldable Grab Hook is strong enough for your job. Plus this grade 70 hook comes in three sizes so you can find what you need.
This 2" Flat Washer from Miller Industries is used on Wheel Lift and Wheel
Retainer Assembly of Vulcan 10 Series Car Carriers. Please see the features
below for a list of carriers and see the brochure tab for breakdowns.
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
This is a 2 Groove small sheave for the hydraulic hoses on the outer stinger
weldment for a Vulcan 807/810, Century 300 Series, and Holmes 440SL by Miller
Industries. See brochures for reference chart and see Features for related
parts.
This 5/8" flat washer from Miller Industries fits the L-Arm receiver bracket on
Vulcan 896 light-duty wrecker wheel grids. This washer is installed with the
5/8" bolt on the bottom side of the pivot arm. An L-Arm is also known as a
scoop, wheel retainer and tire restraint.
This Grade 80 5/8" x 1-1/2" Screw from Miller Industries is used on the wheel
lift and wheel retainer assembly of Vulcan 10 Series Car Carriers. See the
features below for a list of carriers and see the brochure tab for breakdowns.
This bottom side locking pin from Miller Industries holds the L-Arm at the
desired position in the slide-in bracket on wheel lift assemblies for Vulcan
850 and 890 Series light-duty wreckers. With an allen head, the pin screws into
the bottom of the scoop bracket and fits the adjustment holes on the scoop
L-Arm, also known as a wheel retainer and tire restraint.
This painted steel L-Arm bracket from Miller Industries is a replacement
weldment for the wheel lift on Vulcan 896, 897 and V30 light- and medium-duty
wreckers. This receiver mounts to the passenger side wheel grid and secure the
L-Arm, otherwise known as a scoop, wheel retainer or tire restraint.
This bottom side locking pin from Miller Industries holds the L-Arm at the
desired position in the slide-in bracket on wheel lift assemblies for Vulcan
860 and 870 Series light-duty wreckers. With an allen head, the pin bolts into
the bottom of the scoop bracket and fits the adjustment holes on the scoop
L-Arm, also known as a wheel retainer and tire restraint.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.