Search

This left hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Thumbscrew to Hold Wheel Grid On
• Cam Lock to Lod L-Arm In
• 2 Hooks for Ratchet & Strap Style Hold-Down (for Safety Chains)
• Shop for the right hand version of this Outer Cross Tube, <a href="https://zips.com/parts-detail/miller-3-receiver-century-10s-std-rh-12-090 5095" target="_blank"/>12-0905095</a/>
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Shop for the left hand version of this Outer Cross Tube, <a href="http://zips.com/parts-detail/miller-3-receiver-century-10s-std-lh-12-0905094" target="_blank"/>12-0905094</a/>
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

Note: Special Handling Fees Apply

Wheel Grid assembly, right hand, fits Vulcan 850 & 890 wheel lifts. Uses <a href="http://zips.com/parts-detail/miller-l-arm-wheel-retainer-vulcan-850- 8501000"target="_blank"/>8501000</a/> l-arm. This part can be used to replace Part Number, 8500500.

• Fits on 4" x 4" square tube
• Vulcan patented strapless system
• 6,000lbs lift rating

This is a 3" right hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

This is a 3" left hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Note: Special Handling Fees Apply

Also know as: wheel grid, slide bar, or Outer Crosstube, this outer crosstube assembly, right hand, fits Century Formula I, Holmes DFT-400. Accepts part# 12-0903479 standard 3500lbs l-arm. This part can be used to replace Part Number 12-0800913.

• Fits 3" x 3" square tube
• Century standard slide in L-arm style
• Fits Century Formula I
• Fits Holmes DFT-400
• Fits Century/Champion 10 Series Carriers

Note: Special Handling Fees Apply

Outer Crosstube assembly, left hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Accepts 12-0904156 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902790.

• Fits 3 1/2" x 3 1/2" square tube
• Century new style "Pivot-L" with line-up pin
• Uses 12-0902382 basket strap
• Can also be used on Century/Champion 20 series car carriers

Note: Special Handling Fees Apply

Note: Due to size of product, additional handling charges may apply.

• 3.5" x 3.5" Crossbar for Century F6500 Wheel Lift & Holmes DFT 650 Wheel Lift
• Accepts 12-0901406 & 12-0901407 standard 3500lbs l-arm cross tubes
• Also accepts 12-0904690 & 12-0904691 medium duty 6000lbs l-arm cross tubes
• Also accepts 12-0904158 & 12-0901459 pivot style cross tubes
• Uses WL-6500DK1 detent ball kit

Also known as: wheel grid, slide bar, or Outer Crosstube, this left outer crosstube assembly will fit a 3" x 3" square crosstube. It has a cam lock to hold the wheel grid onto the crossbar, a black knob plunger pin to hold the L-Arm in, and 4 hooks for a basket strap style hold down. This crosstube fits the following wrecker models: Century Formula I & Holmes DFT-400. It also will fit Century & Champion 10 Series Carriers. It accepts part number 12-0903479 standard 3,500 lbs. L-Arm. This part can be used to replace Part Number 12-0800912.

Note: Special Handling Fees Apply

This Outer Left Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a <a href="http://zips.com/parts-detail/miller-3-l-arm-cent-holmes-challenger-12-0802606" target="_blank"/>6,000 lb. Slide-In L-Arm, 12-0802606</a/>. You can also get a <a href="http://zips.com/parts-detail/right-outer-slide-in-crosstube-12-0904691" target="_blank"/>Right Hand Outer Slide-In Crosstube, 12-0904691, by clicking here</a/>.

• 31-1/2"
• Fits 3-1/2" x 3-1/2" square tube
• Century 6,000 lb. Slide-In L-Arm Style

Note: Special Handling Fees Apply

This Outer Right Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a <a href="http://zips.com/parts-detail/miller-3-l-arm-cent-holmes-challenger-12-0802606" target="_blank"/>6,000 lb. Slide-In L-Arm, 12-0802606</a/>. You can also get a <a href="http://zips.com/parts-detail/left-outer-slide-in-crosstube-12-0904690" target="_blank"/>Left Hand Outer Slide-In Crosstube, 12-0904691, by clicking here</a/>.

• 31-1/2"
• Fits 3-1/2" x 3-1/2" square tube
• Century 6,000 lb. Slide-In L-Arm Style

Note: Special Handling Fees Apply

<span style="color: red;"/><span style="color: red;"/>Note: Special Handling Fees Apply

</span/>

</span/>

Wheel Grid assembly, left hand, fits Vulcan 850 & 890 wheel lifts. Uses <a href="http://zips.com/parts-detail/miller-l-arm-wheel-retainer-vulcan-850- 8501000" target="_blank"/>8501000</a/> L-arm. This part can be used to replace Part Number, 8500400.

• Fits on 4" x 4" square tube
• Vulcan patented strapless system
• 6,000lbs lift rating

This Wheel Grid Assembly from Miller Industries is a left hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vulcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lifts, as well as Vulcan Car Carriers. This wheel grid accepts left hand L-Arm

Note: Special Handling Fees Apply

This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.

• 3" x 3" square tube
• Used on Formula I wheel lifts after March 1996
• Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
• Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
• Uses WL-300DK1 detent ball kit
• Length: 53"
• Width: 4"
• H eight: 9.25"

Note: Special Handling Fees Apply

This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm <a href="http://zips.com/parts-detail/miller-vulcan-scoop-lh-2-x2-8 700180" target="_blank"/>8700180</a/>. Click here for the left hand version of this wheel grid <a href="http://zips.com/parts-detail/m iller-3-5-receiver-vulcan- scoop-lh-8800800"target="_blank"/>8800800</a/>.

• Vulcan patented strapless system
• Lift rating of 4,000 lbs.
• Accepts L-Arm <a href="http://zips.com/parts-detail/miller-vulcan-scoop-lh-2-x2-8700190" target="_blank"/>8700180</a/>
• Get the right hand version of this wheel gird, <a href="http://zips.com/parts-detail/miller-3-5-receiver-vulcan-scoop-lh-8800800" target="_blank"/>8800800</a/>
  
  Fits:
  
  
• 2010-Current Vulcan Modular 804 Wreckers
• 2010-Current Vulcan Modular 806 Wreckers
• Vulcan 804, 860, 870, and 880 wheel lifts
• Vulcan car carriers

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.

• New style Century "Pivot-L" with line-up pin
• Get a left hand version of this receiver, 12-0904152, by clicking here
• Accepts a Right Hand L-Arm Tire Restraint 12-0904157
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint <a href="http://zips.com/parts-detail/restrain-tire-left-hand-decal-12-0904156" target="_blank"/>12-0904156</a/>. To shop for the right hand version of this receiver, <a href="http://zips.com/parts-detail/miller-3-receiver-century-holmes-pivo-12-0904153" target="_blank"/>12-0904153, click here</a/>. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.

• New style Century "Pivot-L" with line-up pin
• Get a right hand version of this receiver, <a href="http://zips.com/parts-detail/miller-3-receiver-century-holmes-pivo-12-0904153" target="_blank"/>12-0904153, by clicking here</a/>
• Accepts a Left Hand L-Arm Tire Restraint <a href="http://zips.com/parts-detail/restrain-tire-left-hand-decal-12-0904156" target="_blank"/>12-0904156</a/>
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

Note: Special Handling Fees Apply

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete right hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts <a href="http://zips.com/parts-detail/restrain-tire-right-hand-decal-12-0904157" target="_blank"/>Right Hand Tire Restraint L-Arm, 12-0904156</a/>. Also, shop for the left hand version of this Outer Crosstube, <a href=" http://zips.com/parts-detail/miller-3-5-receiver-centurty-10s-pivot-12-0909499l" target="_blank"/>12-0909499L, by clicking here</a/>. Please see the brochure tab for a list of assemblies and breakdowns.

• New style Century "Pivot-L" with line-up pin
• Get the left hand version of this Outer Crosstube, <a href="http://zips.com/parts-detail/miller-3-5-receiver-centurty-10s-pivot-12-0909499l" target="_blank"/>12-0909499R, by clicking here</a/>
  
  Fits
  
  
• 2005-Current Century 10 Series Steel & Aluminum Carriers
• 2009-Current Century LCG 12 Series Steel and Aluminum Carriers
• 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 12 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 16 Series Steel & Aluminum Carriers

Note: Special Handling Fees Apply

Miller Crossbar used on Century F6500 Wheel Lifts and also on Holmes DFT 650 Wheel Lifts. This crossbar measures 3.5" x 3.5" x 56" long. It has slightly different Bolt Pattern than the early style crossbar. Pivot Pin needed for this crossbar is Part Number 12-0805858. The 5/8" Bolts required for this crossbar are part number 12-0716576. This part can be used to replace Part Number 12-0802951.

• 3.5" x 3.5" Crossbar for Century F6500 Wheel Lift & Holmes DFT 650 Wheel Lift
• Has different style bolt pattern
• Requires 5/8" Bolts
• Accepts 12-0901406 & 12-0901407 standard 3500lbs l-arm cross tubes
• Also accepts 12-0904690 & 12-0904691 medium duty 6000lbs l-arm cross tubes
• Also accepts 12-0904158 & 12-0901459 pivot style cross tubes

The safety decal kit includes a safety chain

This is a 3" left Crosstube (wheel grid) by Miller Industries designed to fit Century 211 Crossbars.