Car Carrier Parts

This Inner Boom Weldment from Miller Industries is used on the Century LCG 16 Series wheel lift and slide-in tire restraint assembly. These 16 Series LCG models are made from 2009 through 2014.

This is a retaining angle for hydraulic hoses at the bottom of the main boom of the Vulcan 810 and Holmes 440SL by Miller Industries.

A swing control valve made for Century.

This carrier light bar comes with three light lenses attached to it. It is used on the Tilt Frame Assembly of Vulcan 10 Series Steel & Aluminum Car Carriers made between 2003 and 2005. See the features below for a list of assemblies and see the brochure tab for breakdowns.

This is a bolt-on wear pad retainer on the lower, inside of the outer boom of the Century 312 and Challenger 4312 Wreckers by Miller Industries. See Brochures for a reference chart and Features for related parts.

This is the cage plate of the recovery boom on light duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference charts and Features for related parts. This cage plate will fit on the following wreckers: Century 400 & 600 Series and Vulcan Modular 880/890 Series.

This is a replacement fluid tube for a 10 Series Car Carrier by Miller Industries. This tube connects the winch motor to the underbody line beneath the bed of the car carrier.

This is a maitanence gasket and seal kit from Joint Clutch Gear.

Outer Crosstube assembly, left hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 6500 wheel lift. This kit fits 3-1/2 square crossbars and includes black painted steel crosstubes and alloy L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this L-Arm with a scoop-style tire pan offers a 4,000-lb. weight rating as a pair. This assembly can be upfitted to a 6,000-lb. rating with the 12-0904186 & 12-0904187 steel L-arms.

This is a complete crossbar assembly less the wheel retainers by Miller Industries for the Vulcan 880/890 Series.

Note: Due to size of product, additional handling charges may apply.

This Hydraulic Bed Extension Cylinder was designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so you know it will prove itself when the job really matters. It is black in color and has a t-style end. This cylinder will fit Century 10 and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This harness is for a 22' (20 Series) Century car carrier. It contains 2 hoses and wiring, preassembled and ready to go. This part supplies the power to operate the main winch.

This harness is for a 24' (20 Series) car carrier. It contains 2 hoses and wiring, preassembled and ready to go. This part supplies the power to operate the main winch.

This is the trunnion pivot weldment for the main boom. This pivot weldment will fit the Century 300 Series by Miller Industries and also the Challenger 4300 Express Series. See Brochures for a reference chart.

This is a pulley for the hydraulic hose assembly on the bottom of the outer boom of a Modular Midnight Express by Miller Industries. See Brochures for a reference chart and Features for related parts.

This is a bolt-on wear pad retainer on the lower, inside of the outer boom of the Century 311 and the Challenger 4311 by Miller Industries. See Brochures for a reference chart and Features for related parts.

This an option retractable ladder assembly on Miller Carriers