Electrical Hardware

Stylish stainless steel construction and functional button clicks when engaged as well as illuminating the colored ring. This durable Momentary Switch with a glowing ring will complement your vehicle's style.

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking in-dash panel has finished face plate, engraved legends, and LED backlighting. The biggest advantage of this panel is the circuit breaker switch(s). Each individual switch protects itself with its own internal circuit breaker. 2008 to current Ford F350/450/550, mounts in dash to the right of the steering column.

Use to connect your AW Direct LED Warning Lights, Beacons and Mini Bars to the junction box.<BR<BRNOTE: <emPlease order Warning Light Cable for Warning Lights and Beacons. Order Mini Bar Cable for Mini Bars.</em </body

This is a Mobile Control Systems Valve Operator Air Wavoil.

This panel was designed exclusively for Miller Industries. It has 9 automatic reset circuit breaker switches, back lit legends for each switch, and three momentary rocker switches for controlling the wheel lift functions from inside the cab of trucks equipped with solenoid valves. It has a unique angled design for visibility while standing beside the truck. It is also available with an air shift PTO cut out and a sturdy This 9 Switch Panel from Miller Industries is able to mount to the floor of your wrecker. It fits most large Century and Vulcan heavy duty Wreckers.

This is a manual reset ATC style thermal 30 Amp circuit breaker that can be used in place of an ATC fuse.

This safety director controller can be used with the 3410 and ED3315 Series.

Connector Kit features male connector with 3 pins. Plugs into the power supply.<BR<BR

Amp Connector Kit features a female connector with sockets. Plugs into strobe heads.<BR<BR

Pre-Wired 5-position Rocker Switch Socket - makes for any easy and quick installation

This knife blade battery switch is made to disconnect batteries quickly and easily and help prevent theft, tampering or unauthorized use. Switch mounts on the negative battery terminal. Rated 250A continuous and 750A surge at 12V DC.

Straight Style Control Head Features four direction sequences and 7 Scan-LockT flash patterns. Three positions for adding optional switches to control other warning lights. Scan-Lock can select a different pattern for end flashers, Traffic Advisors and flashers.

Designed to replace outmoded battery isolators and unreliable mechanical battery separators. These bi-directional switches pass current from the chassis battery/alternator to the auxiliary battery and can also pass current from the auxiliary battery to the chassis battery to provide a boost for engine starting.

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking in-dash panel has finished face plate, engraved legends, and LED backlighting. The biggest advantage of this panel is the circuit breaker switch(s). Each individual switch protects itself with its own internal circuit breaker. 2008 to current Ford F350/450/550, mounts in dash to the right of the steering column.

With 50 percent more harness ports, alleviates the need for multiple boxes, while allowing for the addition of more harness systems and increased lighting needs. Larger box makes it easier to work on internal connections. Clear lid offers easy viewing of connections without having to remove lid, saving time when trying to identify lighting system problems. Dual ''Dog bone'' ground strap feature allows 4 terminals to be common, replacing the need for multiple junction boxes, offering additional cost savings. Silicone gasket on lid helps to eliminate damage from moisture and corrosives within the box, reducing costly repairs. Made of high impact, chemical resistant, approved insulating plastic providing a long service life and eliminating the time and money needed for repair and replacement. Mounted by four eyelet-reinforced holes in base of box for increased durability. Contains 12 pre-tapped holes to accept compression fittings or filler plugs allowing for greater configuration versatility. Uses 50 Series compression fittings or 50830 filler plugs (6 included in kit).

Buyers Products 7 terminal junction box provides an organized way to terminate and consolidate your electrical wiring. Choose from 2 optionsa polypropylene box with seven plain terminals or an ABS plastic box that features seven color-coded terminals.

Waterproof and corrosion-resistant plug/socket combination is reliable, easy to use, and has a universal design. Vehicle socket has seven floating spring-loaded pins that are compatible with 4, 5, and 6-pin. Trailer plug has fixed contacts and two O-ring seals. Super-strong magnets inside plug and socket hold them together. Rotate the plug inside the socket to make proper contact throughout. All versions include dummy plug and socket to keep connections clean and dry when not in use.

Environmentally sealed switch uses .25" male spades for quick attachment. The rubber boot will prolong the life of the switch by keeping the elements out. The boot screws directly onto the switch. The boot part number is 12-0301454.

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking in-dash panel has finished face plate, replaceable backlit legends, and lighted circuit breaker style switches. 1999 to current Ford F350/450/550, mounts in the coin box.

Whether you need a switch for a light bar or anything else in your vehicle, these 12V Illuminated LED Rocker Switches are an economical option for integrating additional lighting or 12V equipment into your vehicle with ease. They come in an assortment of colors to suit any style.

Passive Infrared Sensor. Used with non-switched interior lighting.

Use to protect the battery bank, inverter and cables from damage caused by short circuits and overloads. Polycarbonate base and thermoformed ABS cover provide durability and easy installation.<BR<BR

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking in-dash panel has finished face plate, engraved legends, and LED backlighting. The biggest advantage of this panel is the circuit breaker switch(s). Each individual switch protects itself with its own internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500, mounts in dash to the right of the steering column. Available with up to 5 switches.

This In Dash Switch Panel from Power Up Products comes with all switches factory wired and ready to install. This good looking in dash panel has a finished face plate, engraved legends and LED backlighting. The big advantage of this panel is the circuit breaker switches. Each individual switch protects itself with its own internal circuit breaker. Switch panel mounts in the right dash panel below the transmission temperature gauge of 2003 to current Chevrolet/GMC 4500/5500/6500 trucks.

This is a replacement 9 switch control panel by Power Up Products. Can be used on a Century 4024.