Lighting

Rubber grommets help eliminate risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and allows for simple installation by easily snapping the rubber grommet directly into the drill hole. Effective and easy to use rubber grommets ensure your wiring projects and applications are protected and last longer.

This is a replacement 3/4" light grommet by Sadler Power Train. This grommet works with part number M09300.

Standard 6" Oval Chrome Plastic Grommet Cover for M50600-B, by Maxxima.

This Suction Cup Kit from TowMate provides you with a conversion from magnetic to suction cup base for tows requiring you to mount to a non-magnetic surface. These fully adjustable suction cups provide a solid hold with their press-and-lock base.

This Rocker Switch from TowMate I used on lighting systems and can easily control your non Power-Link lights. Install into your dash along with the existing controls for clean, factory look.

This is a set of replacement light bar fold down brackets by Miller Industries.These brackets will fit the tube style pylons for small wreckers. To shop forthe replacement pin this bracket uses, click

This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.

This is a replacement 4-up center LED module for a 21TR and 21TRP light bar.This is used on Torus style modules. This module is amber in color.

This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.

4" Round 35 watt sealed beam flood light bulb with screw terminals. This part can be used to replace Part Number 12-0304152.

Replacement Lens

This is a replacement 4-up center LED module for a 21TR and 21TRP light bar.This is used on Torus style modules. This module is red in color.

Standard Rectangular Chrome Plastic Grommet Cover for M49700, by Maxxima.

4" Round 35 watt sealed beam flood light bulb with spade terminals.

This is a direct replacement strobe tube for the new Whelen 9004-WB Corner Strobe.

Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.

2.5" Round Black Vinyl Grommet for Clearance Markers, by Maxxima.

2 Pin Clearance Marker Connector, from Maxxima.

Towmate's iMon Monitoring System- You will never have to worry about losing your lights again with this easy to use interactive monitoring System. Operates with any system equipped with iMon electronics. Purchase with a new unit or upgrade your existing one easily to work with the iMon. Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and HAZARDS), be alerted when you leave your light bar behind (signal Strength from wireless light bar), and monitor the battery level of your light bar all with one easy to use device. Simply plug your iMon into your vehicles cigarette lighter and be 100% aware of your wireless light bar abilities and location. Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor the signal. If the signal is lost then an alarm will sound to alert you of your towlight not working properly or you have left it on the vehicle you just towed.

Replace any damaged or misplaced end caps on your TowMate Tow Lights with this Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360 lights. End caps from TowMate are also available in Grey or Clear with Red LED for side marker illumination. <BR<BR <B<INOTE:</I</B<BR These black endcaps are unavailable at this time through our supplier. Please see Part Number TM-CLR ENDCAP for a White/Clear substitute replacement.

Replacement LED Light Module

Replacement 21TRP Flasher Board.

ECCO provides a replacement 21 & 27 Series lens clips.

These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.

Power Up Products resistor load kit produces the same draw as an incandescent lamp. Set to flash at a rate determined by the direct current drawn by the lamp load. Flashes at a rapid rate to indicate the burned out lamp. Each resistor is rated to 30 watts. Mounting brackets included.