Medium / Heavy Wrecker Parts

This is the Standard Boom Lock Kit for a Holmes 600 Wrecker. This pin is used to hold the 2 booms together. You can pull this pin to unlock the 2 booms and rotate the booms to the side if you have a side pull situation. This kit includes a plunger pin, spring, and pull grip handle assembly.

The Miller Industries right control plate cover is used to cover up the control handle openings and illustrate the function of each control handle on a low side Heavy Duty wrecker with 8 control handles.

The Miller Industries left control plate cover is used to cover up the control handle openings and illustrate the function of each control handle on a low side Heavy Duty wrecker with 8 control handles.

This is a replacement boom extend cylinder for the Century 1130/1140, 9055 and the Vulcan V-100 heavy duty wreckers by Miller Industries. This cylinder connects to the outer and inner boom weldments to extend the boom of your wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

Zacklift cable guide with a 6" diameter sheave accommodating up to 3/4" cable. The Zacklift cable guide can be used in conjunction with any deck winch. The guide mounts on top of the main vertical section of a Z303 or Z30 Zacklift.

This is a replacement Zacklift safety lock shim set 1/8" x 1" x 3-1/4".

This is a replacment Zacklift extend cylinder 1" x 5-1/4".

This is a replacement Zacklift safety lock shim set 1/8" x 1" x 2-1/2".

This is a replacement Zacklift 1 3/8" Snap Ring for Zacklift Z303, Z30 and Z18.

This is a replacement Zacklift roller pin 1-3/8" x 5-3/4".

This is a Zacklift roller. It is for Zacklift Z303 and Zacklift Z30.

This is a Zacklift dog bone. It is for Zacklift Z303 and Z30.

This is a replacement Zacklift strut tensioning nut Zacklift fifth wheeler.

This is a replacement Zacklift Z303 & Z30 flat spring.

This is a replacement Zacklift Z403 roller.

This is a replacement Zacklift strut arm, fifth wheeler.

This is the Lift Cylinder on the I-600 & I-500 Wheel Lifts on the Challenger 4800 Series light duty wreckers by Miller Industries. This cylinder has a 5" bore with a 9-3/4" stroke. The lift cylinder connects to the wheel lift frame weldment and to the wheel lift outer boom weldment. This is the cylinder that raises the wheel lift boom up and down. To view the part schematic click on the Brochure tab.

This is a tube hydraulic 1/2 Lh stiff leg.

The Sure-Stop is designed to help the driver unfold and lower the wheel lift to a pre-set working position. The kit includes one control module and two limit switches. One limit switch stops the wheel lift when it unfolds the desired preset level while the second stops the boom when it reaches the desired preset height. The control module works by interrupting the power to the solenoid valve when a limit switch has been closed.This kit will help speed up your recovery time by helping you position your wheel lift in seconds and it will reduce damage to your equipment and the roadway under it.

This 7" replacement spring fits the Zip's Tie-Back Tube for Vulcan V24 and Century 312 12-ton wreckers. This spring plays a vital role in protecting the winch and winch line and preventing equipment damage in case the wrong lever is mistakenly pulled. By design, this internal spring fits inside the tie-back tube and provides adequate slack or cushion. When installed correctly, the spring should also give ample audible warning to alert the tow operator to stop the winch operation.

Give the wheels on your tow dollies a place to rest on the deck of your light-duty wrecker with this pair of aluminum tire stands from Zip's. This replacement part works with the Zip's Lift Assist Dolly Mount (Item # ZP-DM-SL) and is the only adjustable tire mount available on the market. The top plate on these two-piece brackets is contoured to the shape of the tire, and both stands are mounted to the surface of the deck. Each side of the cradle is slotted for adjustability. Simply loosen the four bolts and slide the bracket to the desired height.

Miller Industries underlift heel protection plate for Century Street Lowriders (7035, 9055) Heavy Duty Wreckers.

This is a replacement main recovery boom inner weldment for a Century 3224, 4024, Challenger CH-16 and CH20 heavy duty integrated wrecker by Miller Industries. To view the models this inner boom weldment fits, see Features below. To view the part schematics, see the Brochures tab.