Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Reduce downtime and increase efficiency when servicing trucks in the shop or on the roadside with our selection of truck service tools. We carry tools from Tiger Tool and Steck to service bearings, bushings, axels, brakes, hubs, tie rods & more.
The Tiger Tool slack adjuster rod pin press instantly shears off the cotter pin allowing the 3/16" clevis pin to be easily removed. It fits virtually all makes and models of automatic slack adjuster rod pins.
The Tiger Tool automotive bearing cup installer installs two bearing cups in one procedure on virtually all medium and light-duty U-joints. An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip. The u-joint is then rotated and the process repeated, effectively installing both bearing cups.
The Tiger Tool Gunite/Brunner/Bendix slack adjuster puller safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters.
The Tiger Tool adapter kit easily removes and installs the Freightliner and Sterling pin & bushing #16-14603-000 while the suspension remains on the vehicle.
The Heavy Duty Universal Hub Puller is the answer for bearings that have seized to the spindle as a result of corrosion. Simple to set up and operate, the 10903 makes quick work of seized hubs including ConMet Preset, Dana/Spicer LMS, and Meritor Unitized. With six unique adapter sets to choose from, Tiger Tool's Heavy Duty Universal Hub Puller is as dynamic as you need it to be.
The Tiger Tool adapter easily services the Freightliner Airliner and Peterbilt Low Air Leaf rubber isolated pin and bushing while the suspension remains on the vehicle. Tiger Tool designed the push adapter with a defined edge to create more contact between the adapter and the sleeve of the bushing - essentially eliminating any slipping. Making the design even more meticulous, 28 magnets are built into the components of the tool. Altogether, this ensures the tool is easy to assemble, easy to install and keeps hands clear during operation.
The Tiger Tool leaf spring pin socket (Medium) allows you to remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions.
The Tiger Tool leaf spring pin socket (Extra Large) allows you to remove and install threaded leaf spring and shackle pins on Western Star, International, Peterbilt and Kenworth suspensions.
The Tiger Tool 7/8" tie rod end remover provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.
The Tiger Tool 20mm tie rod end remover provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.
The Tiger Tool 3/4" tie rod end remover provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.
The Tiger Tool arm puller easily removes even the most stubborn pitman arms on intermediate trucks, school buses and other vehicles with a nut release pitman arm.
The Bendix® ADB22X™ Air Disc Brake Tool Kit from Ken-Tool contains the tools you need to change Bendix® air disc brake tappet and boot assemblies, tappet inner seals, and guide pins and boots.
The SPL Bearing Cup Installer was designed to be as simple as possible. Pre-determined installed heights specified by the manufacturer have been engineered into the tool ensuring correct installation of bearing cups - every time. The Tiger Tool SPL bearing cup installer installs bearing cups quickly and accurately into the Spicer SPL 140, 170 and 250 Series drivelines quick-disconnect U-joints.
Unable to export outside of the United States <gu-sc/><gu-sc/><gu-sc/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #<gu-sc-dial data-dn="6803220150" title="Click to Connect 6803220150"/><gu-sc-img/></gu-sc-img/>680-322-01-50</gu-sc-dial/> while the suspension remains on the vehicle. <gu-sc-orig style="display: none;"/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #680-322-01-50 while the suspension remains on the vehicle. </gu-sc-orig/></gu-sc/> <gu-sc-orig style="display: none;"/><gu-sc/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #<gu-sc-dial data-dn="6803220150" title="Click to Connect 6803220150"/><gu-sc-img/></gu-sc-img/>680-322-01-50</gu-sc-dial/> while the suspension remains on the vehicle. <gu-sc-orig style="display: none;"/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #680-322-01-50 while the suspension remains on the vehicle. </gu-sc-orig/></gu-sc/> </gu-sc-orig/></gu-sc/> <gu-sc-orig style="display: none;"/><gu-sc/><gu-sc/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #<gu-sc-dial data-dn="6803220150" title="Click to Connect 6803220150"/><gu-sc-img/></gu-sc-img/>680-322-01-50</gu-sc-dial/> while the suspension remains on the vehicle. <gu-sc-orig style="display: none;"/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #680-322-01-50 while the suspension remains on the vehicle. </gu-sc-orig/></gu-sc/> <gu-sc-orig style="display: none;"/><gu-sc/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #<gu-sc-dial data-dn="6803220150" title="Click to Connect 6803220150"/><gu-sc-img/></gu-sc-img/>680-322-01-50</gu-sc-dial/> while the suspension remains on the vehicle. <gu-sc-orig style="display: none;"/>The Tiger Tool adapter kit easily services the Freightliner pin & bushing #680-322-01-50 while the suspension remains on the vehicle. </gu-sc-orig/></gu-sc/> </gu-sc-orig/></gu-sc/> </gu-sc-orig/></gu-sc/>
The Tiger Tool Hendrickson pin & bushing #44695 makes it easy to remove and install the Hendrickson pin and bushing #44695 pin and bushing while the suspension remains on the vehicle. Easily remove and install the FIREMAAX/PRIMAAX Bushing while the suspension remains on the vehicle.