Cargo Control

This Grade 70 Clevis Slip Hook from SafeAll is available in three sizes to adjust to your specific tie-down needs. Whether you're working in construction, transportation, agriculture or any other industry, we have the size for you. These forged hooks feature a Safety Factor of 3:1, and the size and grade are stamped for easy identification on the job.

This Grade 70 Clevis Grab Hook from SafeAll is built to withstand the toughest conditions. Constructed from premium-grade materials and forged with precision, it offers exceptional strength and reliability for general tie-down needs, cargo securement and non-lifting applications.

The Yoke 1-Ton Grade 80 Excavator Weld-On Hook is a highly popular weld-on hook throughout the towing industry, and for good reason. It's designed to be welded onto mobile lifting equipment to provide a pick point that offers quick and hassle-free sling attachment. Additionally, it offers heavy-duty latch locks with hook tips for a tight, secure grip. It is crafted from high-quality alloy steel and can handle a working load limit of 2,200 lbs.

When you need your chain tightened, you can always rely on the Durabilt Specialty Compactor Series with Eye-Eye and 1-3/4" Screw Diameter. This hardy ratchet binder can handle up to 42,000 lbs. Plus, you can count on the steel construction to hold up to whatever you throw at it. This prevents accidents, damaged equipment, and injuries.

The Trailer Bed Chain Tie Down from Buyers Products creates a sturdy, recessed anchor point on your flatbed floor or trailer bed. With a working load limit of 6,600 lb, it uses 3/8 in. Grade 70 chain. Apply it to your recessed wooden floor by welding to the understructure so the tie down will lay flush when installed.

Two set-screws secure winch on rail. Accepts 3" and 4"W straps. Heavy-duty steel construction. Ratchet pawl for easier winching.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. Reduces Weight per Winch by 2 lbs. on Average. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. These winches are lighter than traditional models to help reduce fuel costs and increase net cargo capacity. Low Profile. Side Mount

This 2" X 25' replacement Tie Down Strap comes with a chain and grab hook connected to it.

This 1" strap is 15' long and comes with a ratchet and s-hooks attached at each end of the strap. Use Cargo Tie-Down Straps to secure your equipment and cargo in truck beds, trailers, and carriers. Easy to use ratcheting makes tightening and securing your load fast and easy.

Built to exceed industry standards, this durable and versatile cargo strap offers superior strength, convenience, and peace of mind. Featuring 2-inch polyester webbing, this system ensures secure load restraint with a breaking strength of 10,000 to 13,000 lbs. Additionally, performing exceptionally in all weather conditions and resisting UV rays and other forms of abrasion, its durability surpasses other materials like nylon, propylene, tarp, and bungee cords. This makes it the preferred choice for heavy-duty applications.

Ancra provides a reliable solution and helps you extend the life of your straps with the replacement 4" adjustable end strap with chain anchor. Made with high-end polyester webbing, the strap offers great resistance to abrasion. The webbing has even been treated to improve its resistance against water absorption and freezing, making it an ideal choice for taking on regular heavy-duty tie-down tasks. The strap is designed as a replacement for ratchet strap model 49346-14.

The strength of Ancra Ratchet Strap Assemblies reflects the strength of Ancras reputation in the Transportation Industry. Our heavy-duty, weather resistant straps and solid, reliable hardware have met the demands of the road for more tha 40 years. Our straps are stringently tested for strength and durability in order to bear the Ancra name.

Ancra's 1/2" forged steel heavy-duty D-ring with bolt-on clip is made with tough forged steel for high strength and durability, and is an ideal choice for utility trailer applications. With quick installation and the ability to be placed in a variety of locations, the D-ring can add versatility and provide more options for securing cargo.

This is a cam buckle tie-down strap great for light loads and very easy to use from ANCRA INTERNATIONAL LLC.

High-strength, 12-ga. steel for Series E end fittings, beam sockets and decking/shoring beams. This track may be attached with screws, rivets or by welding. Steel constructed and tested for strength. Available in galvanized or semi-gloss enamel finish. Choose from 5- or 10-foot lengths. Reference TTMA RP No. 47 for installation.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service.

Ancra's heavy-duty cable assemblies with zinc-plated gold chromate chain anchor can be used on cable, combination winches, or web winches with side washers to prevent binding. Constructed of galvanized aircraft cable with grade 70 NACM compliant chain anchor.

Ancra's 1" x 69" Integra Rat Pak red tie-down is the ideal securement strap for anyone who wants to take their favorite recreational vehicles out for an afternoon of rides. We ve manufactured this strap to offer a firm and solid hold over your motorcycles, ATVs, and others without risking the vehicles fresh paint job or chrome finish. Packaged in pairs, these straps each have a working load limit of 400 lbs.

Premium motorcycle tie-downs with integrated soft hooks.

Get cargo securement jobs done right when you use Ancra's ratchet strap with twisted snap hooks and long/wide handle. Made from strong materials and built for durability, this is the kind of tie-down strap you can use for most securement jobs thanks to the flexibility and reliability of our 2-in. yellow treated polyester webbing and our 8.5-in. ratchet handle with aluminum grip. This ratchet strap is equipped with a pair of durable 5-in. black powder-coated twisted snap hooks that offer you more stability and security for your tie-down job. Straps often twist after being tightened, which can diminish their holding strength over your cargo. Our twisted snap hooks are designed to help keep the strap lying flat against the load, making sure that they retain their strength throughout transit.

When you need your chain tightened, you can always rely on the Durabilt Specialty Compactor Series Ratchet Binder with Eye-Eye and 1-3/8" Screw Diameter. This hardy ratchet binder can handle up to 28,000 lbs. Plus, you can count on the steel construction to hold up to whatever you throw at it. This prevents accidents, damaged equipment, and injuries.

This is a replacement bolt for the gear set. If using the recommended drill set, these should last an estimated 2,000 to 3,000 cycles. Using a 1/4 or 3/8 impact will shorten your life to half that. Drive bolts are considered wear items and are not covered under warranty. Use of 1/2 impacts voids binder warranty immediately. Here is an instructional video on drive bolt replacement.

Ancra Winch Strap Assemblies combine heavyduty, wear and weather resistant latex treated polyester webbing with strong, dependable hardware to meet the demanding conditions of flatbed operations. Ancra straps meet DOT specifications and are tested for strength and durability. Meets or exceeds WSTDA T-1 Recommended Standard Specifications

Ancra's standard outward off-set PortaWinch features a 3-bar system to resist freezing and the versatility to be installed in any standard stake pocket. High-performance steel components make the PortaWinch strong enough to secure heavy-duty cargo, while the 3-bar design makes strap insertion easy during snow and ice conditions and prevents the mandrel from freezing up so you can be confident using the PortaWinch in harsh weather. With the ability to be installed in any standard stake pocket, the PortaWinch give you more options for taking on unique tie-down challenges.