0 Item(s)
You have no items in your shopping cart.
Cylinder and Pin Replacements
Showing 65 items
Clear all filters- Price
-
-
-
-
-
Recently viewed products
-
Tiger Tool Retaining Bolt
-
EZ Claw Extendable Cable Tieback for HD Rotator
-
Reelcraft Swivel Assembly
-
Pro-Lok 30" X-Long Slim Jim Lockout Tool
-
Lodar Actus Actuator Kit
-
SnowDogg Light Bracket
-
TriMark Latch Gasket
-
Fstn,Screw,Sssh.,312X
-
Century Bed Pivot Pin 28.5" x 2" Tandem Axle
-
PAC Tool Mounts Standard Super/HD Standard Super Adjustamount Kit w/PAC Strut
-
Ramsey 4,000 lb. and Below Rated Winch Accessory Kit
-
Voltair 6 Gallon Air Storage Tank
-
Miller Pin Tow Sling Plunger
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Miller Roll Pin 1/4" x 1 3/4"
This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on
a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part
schematic click on the Brochure tab.
$0.29
Miller Wheel Lift Extend Cylinder Shaft Base End LCG Carriers
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by
Miller Industries. This is the shaft attaches the base end of the cylinder to
the wheel lift outer boom weldment. To view specific models see Features below.
To view the part schematics see the Brochure tab.
$29.39
Miller Lift Cylinder Weldment Pin 15 / 20 / 30 Series Car Carriers
This is a replacement lift cylinder pin weldment for the 15 , 20, and 30 series
car carriers by Miller Industries.
$86.99
Miller Pin Weldment Lower Lift Cylinder
This is a lower lift cylinder pin weldment from Miller Industries.
$113.99
Miller Wheel Lift Extend Cylinder Shaft Rod End LCG Carriers
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by
Miller Industries. This is the shaft attaches the rod end of the cylinder to
the wheel lift inner boom weldment. To view specific models see Features below.
To view the part schematics see the Brochure tab.
$43.09
Miller Wheel Lift Extend Cylinder 3" x 54"
This Wheel Lift Extend Cylinder measures 3" x 54". It is designed to withstand
necessary forces and to be used at states pressures. This cylinder meets
industry and government specifications and will prove itself on the job when it
really matters. It is used on Century Generation II 16 Series Car Carriers.
Please see the features below for a list of trucks and the brochure tab for a
list of breakdowns.
$1,249.99
Miller Seal Kit IT27B Boom Lift Cylinder
This is a Seal Kit for the boom lift cylinder on Century 300 Express Series,
Century 211 & 212, Challenger 4300 Express Series, and Champion Model 101
Wreckers by Miller Industries. To view part schematics please click on the
Brochures tab.
$183.99
Miller Wheel Lift Tilt Cylinder 3.25" x 1.75" x 13"
Note: Special Handling Fees Apply
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3.25" x 1.75" x 13"
Fits: - Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
- Length: 23.75"
- Width: 4"
- Seal kit 12-03030790
$1,051.99
Miller Cylinder Bed Extend 3 1/2" x 120"
Note: Special Handling Fees Apply
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3-1/2" Bore x 120" Stroke
uses 15-73638 seal kit
Fits: - Century 12 Series LCG Steel & Aluminum Carriers 2009-Current
- Century 16 Series LCG Steel & Aluminum Carriers 2009-2014
- Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
$2,574.99
Miller Seal Kit Wheel Lift Up / Down Cylinder
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter.
$102.99
Seal Kit For 8603000
This Seal Kit is for part 8603000. This part can be used to replace Part
Number, 8616800.
$86.99
Miller Hair Pin for Boom Lift Cylinder Pin BK 518
This is the Hair Pin for the Boom Lift Cylinder Pin BK-518. This hair pin keeps
the clevis pin from pulling out and letting the cylinder fall off the boom.
$4.49
Miller Challenger Underlift Extend Cylinder Seal Kit
This Seal Kit from Miller Industries is used on the Underlift Extend Cylinder
of a Challenger CH-45 Wrecker.
$244.99
Miller Wheel Lift Extend Cylinder
This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.
$646.99
Miller Wheel Lift Tilt Cylinder GEN II LCG 20 Series
This hydraulic wheel lift tilt cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$1,180.99
Miller Roll Pin, 3/16" x 1-3/4", Century Wreckers
This 3/16" x 1-3/4" Roll Pin from Miller Industries is used on the Subframe
Assembly of several Miller Century and Challenger Wreckers. When used a roll
pin it is recommended that the hole size be the same as the diameter of the
pin, 3/16" in this case. Please see the features below for a list of trucks and
see the brochure tab for breakdowns.
$2.89
Miller Bed Tilt and Cylinder Bushing
This is a replacement Cylinder Bushing made out of Copper.
$27.49
Miller Vulcan 819 / 821 Seal Kit W/L Extension and Bed Lift Cylinder
Seal Kit for Vulcan 891 and 821 Series Car Carrier Wheel-Lift Extend and Bed
Lift Cylinders.
Services #814010800, #814010700, #814011500, #810411100 50" Pin to Pin
cylinder and 814011500 60.75" Pin to Pin Cylinders. Fits only Pre 1998
Production early carriers with serial numbers begininng in 5 or 8.
Please remember that seal kits may fit different cylinders of the same
diameter. See the chart below for more information.
$130.99
Miller Rod End Boom Lift Cylinder Pin Holmes HP 552
This is the Wrecker Boom Lift Cylinder Pin for the Holmes HP 552 light duty
wrecker by Miller Industries. This pin goes through the rod end of the
cylinder. This pin is used to connect the boom lift cylinder to the outer
wrecker boom weldment. To view the part schematic click on the Brochure tab.
$46.99
Miller Vulcan 819 / 821 Seal Kit Wheel Lift Up / Down
This Seal kit fits Miller Vulcan 819 and 821 Series Car Carriers Wheel-Lift
Up/Down Cylinder part # 814011000.
Fits pre 1998 Vulcan Car Carriers with serial numbers beginning in 5 or 8.
Please remember that seal kits may fit different cylinders of the same
diameter. See the chart below for more information.
$115.99
Miller Wheel Lift Extend Cylinder Seal Kit Century 712 and 716
This is a Seal Kit for the Wheel Lift Extend Cylinder on the Century 712 & 716
Series light duty wreckers by Miller Industries. This seal kit is used on
extend cylinder part number, HD130. To view the part schematic click on the
Brochure tab.
$149.99
Miller Pin Weldment Upper / Lower Lift Cylinder
This is a Miller upper and lower lift cylinder pin weldment.
$153.99
Miller Vulcan 819 / 821 Bed Extend Seal Kit
Vulcan 819 and 821 Series Car Carrier Bed Extend Cylinder Seal Kit for cylinder
#814010900.
Fits only Pre 1998 Production carrier with serial numbers beginning in 5 or 8.
Please remember that seal kits may fit different cylinders of the same
diameter. See the chart below for more information.
$161.99
Miller Cotter Pin 1 1/4"
This is a 1-1/4" cotter pin used in many applications. Some common applications
for this pin is to secure the boom lift cylinder on the cylinder pin on the
Holmes HP 552 light duty wrecker by Miller Industries. This pin also works with
wheel lift cylinder pin on the Vulcan Modular 880/890 series by Miller
Industries. To see which specific wrecker models this cotter pin will fit
please see Features below. To view the part schematics click on the Brochure
tab.
$5.41
Miller Wheel Lift Lift Cylinder 5" Bore Century 614 w/ FII
This is the Lift Cylinder for the Formula II Wheel Lift on the Century 614
light duty wreckers by Miller Industries. This lift cylinder has a 5" Bore.
This is the cylinder that lifts the boom of the wheel lift up and down. To see
which specific models this lift cylinder will fit please see Features below. To
view part schematics click on the Brochure tab.
$2,037.99
Miller Wheel Lift Lift Cylinder 5" Bore x 93/4" Stroke Challenger 4800 Series
This is the Lift Cylinder on the I-600 & I-500 Wheel Lifts on the Challenger
4800 Series light duty wreckers by Miller Industries. This cylinder has a 5"
bore with a 9-3/4" stroke. The lift cylinder connects to the wheel lift frame
weldment and to the wheel lift outer boom weldment. This is the cylinder that
raises the wheel lift boom up and down. To view the part schematic click on the
Brochure tab.
$10,013.99
Miller Seal Kit Green Cylinder
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter. See the chart below
for more information.
$90.99
Miller Seal Kit
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter.
$102.99
Miller Seal Kit Lift Cylinder 1040
Miller Industries provides a replacement seal kit lift cylinder 1040.
$108.99
Miller Wheel Lift Cylinder Century 712 and 716
This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series light
duty wreckers with a Formula III wheel lift. This is the cylinder that raises
your wheel lift boom up and down. To view the part schematic click on the
Brochure tab.
$2,640.99
Miller Tow Bar Extend Seal Kit 10 Series Century from 8 / 1986
This seal kit fits 10 series Century car carriers tow bar extension cylinders
part #030198.
Please remember that seal kits may fit different cylinders of the same
diameter.
See the chart below for more information.
$126.99
Miller Seal Kit Challenger 6807 T50 Wrecker
This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder
$135.99
Miller Seal Kit Lift Cylinder Carrier
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter. See the chart below
for more information.
$143.99
Miller Wheel Lift Cylinder Century 712 and 716
This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series
light duty wreckers with a Formula III wheel lift. This is the cylinder that
raises your wheel lift boom up and down. This cylinder replaces part number
12-0303101 (which is no longer available).
$3,085.99
Miller Rear Left Lift Cylinder Dual Deck Carrier
This left bed lift hydraulic cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$3,139.99
Miller Rear Right Lift Cylinder Dual Deck Carrier
This right bed lift hydraulic cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$3,139.99
Miller Wheel Lift Tilt Cylinder 5.5" Bore Challenger 4800 Series
This is the Wheel Lift Tilt Cylinder for the I-600 Wheel Lift on the Challenger
4800 Series light duty wreckers by Miller Industries. This cylinder has a 5.5"
bore. This cylinder attaches to the link weldment and the wheel lift outer boom
and allows the wheel lift to tilt up and down. To view the part schematic click
on the Brochure tab.
$12,798.99
Miller Wheel Lift Tilt Cylinder GEN I LCG 12 and 16 Series
This hydraulic wheel lift tilt cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$860.99
Miller Tow Bar Extend Cylinder 10 Series Century Carrier
This 12-0301798 10 Series Century Carrier Tow-Bar Extension Cylinder fits
carrier from 8/1986 to current. Uses cylinder seal kit 12-0304220
$1,084.99
Filter
1 - 60 of 65 items
