Replacement Pins

Sort by

Miller Safety Pin

Safety Pin made by Miller Industries

$2.46

Miller Wheel Lift, Lift Cylinder Pin, Rod End, Century EB4 Express

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Century EB4 Express light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin connects the lift cylinder to the wheel lift outer boom weldment. This pin is for cylinder part number 12-0303911. To view the part schematic click on the Brochure tab.

$100.99

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Miller Fold Cylinder Pin Weldment Base End Century / Challenger

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

$140.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

$31.49

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$43.19

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$37.79

Miller Rear Wheel Lift Extend Cylinder Pin Century Holmes Vulcan 5.88" x 7/8"

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

$102.99

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.09

Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

$99.99

Miller Fold Cylinder Lower Pin Century Midnight Express / Vulcan 807

This is the fold cylinder lower pin on the wrecker boom of the Century Midnight Express and Vulcan 807 by Miller Industries. See Brochures for reference chart and Features for related parts.

$115.99

Miller Boom Lift Cylinder Base Pin Century Vulcan

This is the Boom Lift Cylinder Base Pin on the Century Modular 211, Vulcan Modular 804 and Vulcan Modular 806 light duty wreckers by Miller Industries. This pin connects the Boom Lift Cylinder to the subframe assembly. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab.

$60.99

Miller Stinger Pivot Pin Century 300 Series / 211 / 212

This is the stinger pivot pin on the wrecker boom of the Century 211/212/300 Series by Miller Industries. See Brochures for reference chart and Features for related parts.

$86.99

Miller Wheel Lift Upper Arm Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$78.99

Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes

This is a Pin that is used in different locations on the Wheel Lift of Century Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty wreckers by Miller Industries. This pin is used to hold the tilt cylinders on to the wheel lift frame weldment. This pin also is used to attach the upper arm weldments to the wheel lift frame weldment also. To view part schematics click on the Brochure tab.

$99.99

Miller Boom Lift Lower Cylinder Pin Century and Challenger HD Wreckers

This is a replacement boom lift cylinder lower pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the base end of the cylinder and attaches the lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$202.99

Miller Wheel Lift Tilt Cylinder Upper Pin Century Vulcan

This is the Wheel Lift Tilt Cylinder Upper Pin on the Wheel Lift of a Century Modular 400 & 600 Series, Vulcan 880/890, Vulcan Modular 880/890 and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This pin connects the wheel lift's tilt cylinder to the wheel lift frame weldment. To view which wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$76.99

Miller Fold Cylinder Upper Pin Century Vulcan

This is the Fold Cylinder Upper Pin for the base end of the cylinder on Century Modular 211, Vulcan Modular 804, Modular 806 and Modular 807 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the boom of the wrecker. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$97.99

Miller Wheel Lift Upper Arm Boom Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$65.99

Miller Boom Lift Lower Cylinder Pin Century Wreckers

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$301.99

Miller Wheel Lift Extend Cylinder Rod Pin Century

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is for the rod end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$65.99

Miller Removable Rail Lynch Pin 7/16"

This Miller Industries part is a 7/16" lynch pin for connecting removable rails. It is also used in various other areas.

$5.99

Miller Boom Lift Cylinder Pin Century 3212 and Vulcan V-30 HD Wreckers

This is a replacement boom lift cylinder pin for the Century 3212 and the Vulcan V-30 heavy duty wreckers by Miller Industries. This pin is used for the upper and lower lift cylinder pin. This pin connects the lift cylinder to the subframe and the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$106.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Century

This is the Lift Cylinder Pin on the Wheel Lift for Century Formula 6500 - 600 Series and Century Modular 400 & 600 Light Duty Wreckers by Miller Industries. This is the pin for the rod end of the lift cylinder. To view specific models this pin will fit see Features below. To view part schematics click the Brochure tab.

$144.99

Miller Wheel Lift Extend Cylinder Base Pin 8.25" Century

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is 8.25" long with a center groove. This pin is for the base end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$46.99

Miller Wheel Lift Tilt Cylinder Pin Century Modular 400 and 600

This is a Wheel Lift Tilt Cylinder Pin for the Formula I Wheel Lift Assembly on the Century Modular 400 & 600 Series light duty wrecker by Miller Industries. This pin is used to connect the tilt cylinder to the outer boom stinger weldment of the wheel lift. To view the part schematic click on the Brochure tab.

$81.99

Miller Boom Lift Cylinder Lower Pin Century Vulcan

This is the Boom Lift Cylinder Lower Pin for a Century 400 & 600, Vulcan 880/890 and Vulcan Modular 880/890 light duty wrecker by Miller Industries. This pin connects the lift cylinder to the subframe for the wrecker. To see which specific wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$52.99

Miller Boom Lift Upper Cylinder Pin Century and Challenger HD Wreckers

This is a replacement boom lift cylinder upper pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the rode end of the cylinder and attaches the lift cylinder to the main recovery boom outer weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$205.99

Miller Fold Cylinder Base Pin Century Midnight Express

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the base end pin which is connected to the tower/boom. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

$85.99

Miller Base End Boom Lift Cylinder Pin Century 614 Series

This is the Boom Lift Cylinder Pivot Pin for Century 614 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the wrecker frame weldment allowing the cylinder to pivot as the boom goes up and down. To see which models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$159.99

Miller Upper Tilt Cylinder Pin Century Challenger Champion

This is the Upper Tilt Cylinder Pin on the wrecker boom of Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series and the Champion Model 101. To view related parts see Features below. To view part schematics click the Brochures Tab.

$170.99

Miller Lower Lift Cylinder Pin Century Formula II

This is the Lift Cylinder Pin on the Century Formula II Wrecker by Miller Industries. To view the Part Schematic click on the Brochures tab.

$23.49

Miller Fold Cylinder Lower Pin Century Vulcan

This is the Fold Cylinder Lower Pin for the rod end of the Cylinder on Century Modular 211, Vulcan Modular 804 and Modular 806 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the wheel lift of the wrecker. To see which specific wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$90.99

Miller Boom Extend Cylinder Front Pin Century and Challenger HD Wreckers

This is a replacement boom extension cylinder front pin on the Century 1130/1140, 7035, and Challenger CH-35 heavy duty wreckers by Miller Industries. This is the pin that connects the extend cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$93.99

Miller Lift Cylinder Upper Pin Century

This is the Upper Cylinder Pin on the Lift Cylinder on Century Formula I Duplex Tilt 411 & 412 wreckers. This pin also fit the Century Formula 6000 - 600 Series wrecker. To view part schematics click on the Brochures tab.

$113.99

Miller Boom Extend Cylinder Rear Pin Century and Challenger HD Wreckers

This is a replacement boom extend cylinder rear pin on the Century 5130/5230 and Challenger CH-32 heavy duty integrated wreckers by Miller Industries. This pin goes through the rod end of the cylinder. It is the pin that connects the inner boom weldment to the boom extend cylinder. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$82.99

Miller Wheel Lift Extend Cylinder Pin Century

This is the Wheel Lift Extend Cylinder Pin for the extend cylinder on the Century EB4 Express and Century Modular Midnight Express by Miller Industries. To view part schematics click on the Brochures tab.

$38.39

Miller Boom Lift Cylinder Pin Century Challenger Champion Holmes

This is a clevis pin that attaches the boom lift cylinder to both the boom and the wrecker itself. This pin is used to attach boom lift cylinder IT27B on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, Champion 101 Series, and Holmes 440 Series. To view part schematics Click on the Brochures tab.

$59.09

Miller Boom Extend Cylinder Rear Pin Century 9055 and Challenger CH-45 HD Wreckers

This is a replacement boom extend cylinder rear pin for the Century 9055 and Challenger CH-45 heavy duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder and connects the boom extend cylinder to the inner boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$67.99

Miller Base End Wheel Lift Extend Cylinder Pin Century Formula II

This is the Wheel Lift Extend Cylinder Pin on the Century Formula II Wheel Lift by Miller Industries. This pin goes through the base end of the cylinder. This pin connects the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$88.99

Miller Boom Extend Cylinder Rear Pin Century and Challenger HD Wreckers

This is a replacement boom extension cylinder rear pin for the Century 1130/1140, 7035, and Challenger CH-35 heavy duty wreckers by Miller Industries. This is the pin that connects the boom extend cylinder to the inner boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see that Brochure tab.

$90.99

Miller Boom Extend Cylinder Front Pin Century and Challenger HD Wreckers

This is a replacement boom extend cylinder front cylinder for Century and Challenger heavy duty integrated wreckers. This pin goes through the base end of the cylinder and attaches it to the main recovery boom outer weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochures tab.

$124.99

Miller Boom Extend Cylinder Front Pin Century 9055 and Challenger CH-45 HD Wreckers

This is a replacement boom extend cylinder front pin for the Century 9055 and Challenger CH-45 heavy duty wreckers by Miller Industries. This pin goes through the base end of the cylinder and connects the boom extend cylinder to the outer boom weldment of the wrecker. To view what models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$128.99

1 - 43 of 43 items