0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
SafeAll V-Strap with 15" J Hooks
This V-Strap Assembly from SafeAll is specifically designed to provide a secure and efficient solution for loading disabled vehicles onto car carriers. With its innovative low-profile design, these assemblies offer improved undercarriage clearance, ensuring a smooth and hassle-free loading process.
$94.99
–
$99.99
All-Grip V-Strap with 15" J Hooks
With the All-Grip V-Strap with 15" J Hooks, you can protect against damage to the underside of the bumper or spoiler. Thanks to its two-ply material with tapered eyes at the pear link, there is extra durability. Plus, it’s reinforced by the hook, making it even more durable.
$113.99
–
$208.99
Miller Base End Boom Lift Cylinder Pin Century 614 Series
This is the Boom Lift Cylinder Pivot Pin for Century 614 Series light duty
wreckers by Miller Industries. This pin goes through the base end of the lift
cylinder. This pin connects the boom lift cylinder to the wrecker frame
weldment allowing the cylinder to pivot as the boom goes up and down. To see
which models this pin will fit please see Features below. To view part
schematics click on the Brochure tab.
$145.99
Century Boom Wear Pads Challenger Holmes and Vulcan
These are the wear pads for the inner and outer booms of the wrecker. These
Wear Pads will fit the following wreckers by Miller Industries: Century Express
300 Series, EB4 Express, EB4 6500, Modular Express 300 Series, Formula I,
Duplex Tilt 411 & 412, Formula 6500 - 600 Series, Midnight Express, Challenger
Express 4300 Series, 4700 Series, 4800 Series, Holmes 440 Series, DFT 400, HP
552, DFT 650, and Vulcan Modular 806 and 807. See Brochures for reference chart
. Each Wear Pad sold separately.
$5.29
Miller Clutch Spring 4" 4 Ton Hydraulic Winch
This Clutch Spring from Miller Industries is used on the assembly of 4-Ton
Hydraulic Winches. This winch assembly is used on several Miller Car Carriers,
including Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the
features below for a full list of carriers. Also see the brochure tab for a
list of breakdowns.
$5.29
Miller Wheel Lift Upper Arm Pin Weldment Century / Holmes
This is a replacement wheel lift upper arm pin weldment on Light Duty Century
and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift
upper arm weldment to the frame weldment. This pin fits the Century Formula
6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP
552/DFT 650 wrecker. To view the part schematics please click the Brochures
tab.
$70.99
Miller Wear Pad Cage Plate Century Challenger and Holmes
This is a wear pad cage plate on the inside, bottom of the outer boom of a Century Formula I 411/412, and a Century 6500 600 Series Wrecker. This cage plate also fits Challenger 4700 and 4800 Series Wreckers. It will also fit Holmes 440 Series and HP552 Series by Miller industries. See Brochures for a reference chart and Features for related parts. This part can be used to replace Part Number 12-0703093.
$60.99
Miller Boom Extend Cylinder Pin Century Challenger Holmes Vulcan
This Extend Cylinder Outer Boom Shaft from Miller Industries is used on many
different assemblies on Century, Challenger, Holmes, and Vulcan Wreckers. These
assemblies include boom, front outrigger, and wrecker assemblies. Please view
the brochures tab to see a full list of wrecker assemblies and parts
schematics.
$52.99
Related products
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
