Toolboxes & Storage

This Dual Trash Can Mount from In The Ditch is an efficient way to mount two 4 gallon trash cans side by side. Shop our selection of

These powder-coated aluminum brackets feature flexible latches to secure your equipment. Brackets adjust to hold anything from 1" to 1-5/6" dia.

This Bungee Cord Holder is the easiest way to carry and store your bungees. Put 9?, 15? and 21? bungees on the holder and carry it in one hand. When you are done just hang the mount with bungees on the included mounting plate. Don?t forget to buy your bungee cords,

Keep your tool box organized with this Lug Wrench Bracket from In The Ditch. This pre-drilled mount easily bolts to the inside of your tunnel box and allows operators to reach lug wrenches quickly. This handy bracket holds 2 standard size lug wrenches. Shop our selection of

Tough ABS plastic construction. Holds standard 14.1-oz. propane canisters (3-1/4" base)Measures 8-3/4" x 4-1/4". Holder allows you to store your propane torch safely in the shop or on your service vehicle.

This Slide Out Drawer system is a perfect addition to our Pro Series Tool Box by In the Ditch. This system is a great way to get your truck organized. This slide out drawer takes just a few minutes to install using the pre-drilled holes in your Pro Series Tool Box Shelf. This drawer will take all the abuse that comes from day after day use. it is made from military grade aluminum and uses composite slide pads on the drawer. This slide out drawer has a 20 lb. load rating and will work great under tables, shelving, or just about anywhere you can think of adding a slide out drawer. This draw measures 15" wide by 13" deep by 4" tall.

This is a universal 24" cross over tunnel box for heavy duty Century and Vulcan wreckers by Miller Industries.

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by 3'x12' Rolls. Also available in 1'x1' Tiles and 3'x4' Sheets. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

This is the Phoenix rubber mat for toolboxes. This rubber mat measures 36",48", or 60"W x 18"D.

Shovel or Broom mount for car carriers simply bolts to the bottom side of the subframe to store your shovel or broom. Threaded T-handle screws down to hold the tool in place.

Ever get tired of reaching into a toolbox or under a counter to pull out a heavy object? Introducing our Heavy Duty Storage Drawers made out of military grade aluminum. These drawers are rated at 500lbs and each slide has a lock in/out position to keep from closing as your trying to place an object in the drawer. We designed this guy to mount on any flat surface with vertical adjustment for various heights. We built a drill template into the tray for ease of installation. It also includes 5 adjustable dividers which allow you to separate your items. These draw systems are offered in 19", 25", 30" and 40" setups.

Zip's Custom Standard Toolbox Shelf Kits are an easy way to optimize the dead space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. These standard shelf kits get bolted to the inside of the toolbox. All necessary mounting hardware is included with these standard shelf kits. They are made from high quality .125" thick aluminum. These standard shelf kits not only maximize your toolbox storage space, but also offer a custom look to the inside of your toolbox while on a recovery scene.

This is a Zip's Custom Toolbox Sliding Drawer for an underbody toolbox. This drawer system was designed to store a jack in the toolbox. With this system putting the jack away or getting it out to use is convenient and easy. The drawer pulls out allowing you to place the jack on it instead of awkwardly trying to put it in over the toolbox door. This drawer is made from sturdy aluminum and includes mounting brackets.

Phoenix Adjustable ToolBox Shelf made from galvanized steel which can be installed into virtually any 18" x 18" toolbox in a matter of minutes.

Use these versatile Mini Rubber Fist Clamps from QuickFist to secure almost anything inside your truck, trailer or shop. Each clamp holds up to 25-lb. and adjusts to 5/8" to 1-3/8" dia. Attach clamps using your own #10 bolts, washers and nuts.

Keep all your chains and snatch blocks organized and easily accessible with the In The Ditch Snatchblock and HD Chain Holders. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 250 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Snatch Block and Chain Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and actually worked.

This Stellar (formerly American Eagle) heavy duty steel drawer system. With a 2.5" or .5" high riser and has drawer options. Drawer slides are rated to hold up to 500lbs and will support heavy tools and other equipment. All drawer components are manufactured of galvanized steel to prevent rust and provide a virtually indestructible surface for the latches to strike-no worn paint as on other manufacturer s product. The metal edges of the drawers, and top shelf, are hemmed for added strength and safety.

These powder-coated aluminum brackets feature flexible latches to secure your equipment. Brackets adjust to hold anything from 1" to 1-5/6" dia.

Buyers Products Steel Truck Box Mounting Brackets are designed to mount any Buyers Products steel and stainless steel underbody truck box. The steel brackets are built for long wear with a corrosion-resistant black powder-coated finish in your choice of formed C-channel or heavy duty structural steel. Choose welded or bolt-on braces. Mounting is also made easy with a universal hole pattern design and brackets that are sold in boxed pairs for immediate use.

This Shackle Hanger Kit from Miller Industries will Bolt On where you need it. This kit includes 5 hangers that bolt up to a flat surface to hang your shackles on.

These handy shelves are not only designed to make any shop or garage more organized they just look good to. These shelves are available in 3 different widths and 5 different depths. These shelves can be mounted with a gusset down offering a smooth sleek top surface or you can turn them over for a shelf that has a lip around the top. To make your life easier we include hardware so you can mount this holder to just about anything you want. We also include special peg board screws so you can screw the holder directly to peg boards. The special screws are slightly larger than the peg board hole and work great. They can also be removed and reused so you can move or add racks without destroying your peg board. Each mount is made from Aircraft grad aluminum and come with a 100 lbs. structural load rating. Remember though, it's up to you to make sure you mount them to a surface that can support the load you put on the shelf.

Bolt or weld brackets in place.

This is an adjustable trash can and bucket mount from In the Ditch. It will adjust to hold any trash can or bucket from 3 gallons up to 10 gallons. Made from 1/8" thick aluminum, this mount has 5/16" mounting holes and comes with a 21" bungee cord. This will easily mount to any flat surface. Sold as 2 pieces to hold 1 can.

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

This 3-In-1 Hook Rack from In The Ditch has become very popular because with its modular design, the uses are limitless. Each hook has an inside depth of 2-3/4", making it just the right size for hard hats, extension cords, tape rolls, wire rolls, and so much more. Each 3-In-1 rack comes with 4 arms that can be installed in any of the 5 slots so you can choose where to put it. If you need a larger hook be sure to shop for the XL Modular Hook Rack, ITD-1249.