Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Wireless Tow Light is a part of TowMate's Trimline Series. It comes with light strips on the front and a marker light on each side. It will provide you with stop, tail, and turn signals with ease. There are two switches located on the top of these bars. One of these switches is the master on/off switch and the other controls the taillights. The units are lightweight, easy to transport, and offer a compact solution to bigger tow lights. The lights will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. Included in the system is a transmitter, charge cord, instructions, and rubber straps that are mounted on the top and bottom of these lights. Choose from any transmitter at no additional charge. The transmitter options include 4 PIN Round, 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.
These Hard-Plastic Halogen Tow Lights increase visibility while standing up to the harshest elements. Two 4" sealed-beam lamps with hard-plastic housings handle the roughest terrain. These lights include a 4-Way plug, 30' cable and 70-lb. round magnets, making them simple to connect and easy to use.
The new TM-Flux is straight out of the future! This light has a charge time of 8 minutes, and run times for up to 4 hours. This is the short haul Tow Operators dream light bar. No more getting caught on the road with dead batteries, fully charge the light in only 8 minutes. Using the technologies of tomorrow to power the system, TowMate has created the fastest charging and most reliable light bar ever.
This 36" Wireless Tow Light from TowMate provides stop, tail, and turn with side marker lights and three DOT center lights. It also comes with back up lights installed. The lights will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. This system includes a transmitter, charge plug, and instructions. Choose from any transmitter at no additional charge. The transmitter options include 4-PIN Round, 4 PIN Flat, 6 PIN Round, 7 PIN Round (Standard), 7 PIN RV Style, and a Hardwire Transmitter.
The Towmate tow light is ideal for situations where a corded light won?t work. The powerful, long-lasting tow light includes stop, tail and turn lights with side marker lights on each end and two amber high-intensity strobe lights for maximum visibility. Includes transmitter (Pick the style transmitter from the dropdown above). 36"L.
This 25" Wireless Tow Light from TowMate uses three DOT marker lights, and side marker lights to provide you with stop, tail, and turn signals. The unit also comes with back up lights and four bungee straps for easy mounting. This light features a 4-pin socket on the bottom allowing it to be operated with a cord in the event the operator forgets to charge it. Choose from any transmitter at no additional charge. The transmitter options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.
This 21" Wireless Tow Light from TowMate comes with a solar panel that will increase your battery life and reduce the need to charge this unit from a charging cord. The light also provides stop, tail, and turn signals with ease. Powerful magnetic mounts makes mounting this tow light almost anywhere fast and easy. The light will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. This system includes a transmitter, charge cord, foot covers, and instructions. Choose from any transmitter at no additional charge. The transmitter options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.
This 17" Wireless tow Light from TowMate provides you with stop, tail and turn signals from a lower profile unit. It also provides you with strobe lights. It can be magnetically mounted to upgrade any taillight system. The light comes standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. This light includes a charge cord that will recharge from a cigarette socket and a 4-Pin Round Transmitter. Also included in this system are foot covers and instructions. Choose from any transmitter at no additional charge.
Suction Cup Tow Lights are a heavy duty light kit featuring two sealed truck-lite stop/tail/turn signals, heavy-duty rubber housings and industrial grade suction cup bases. These lights can be used on any smooth surface made of steel, aluminum, fiberglass or glass. The suction cup base (used by plate glass handlers) is secured by flipping a lever on the base. Its grip is so strong, the lights cannot be blown off yet can be released by lifting a tab on the suction cups.
These high-intensity LED Wireless Tow Lights run 10 hr. on a single charge. Lights include 4-way transmitter with 1,000' range, charge cord and rubber boots for magnets to protect against damage. 12V DC.
Save time and reduce installation frustration with this Wireless LED Towlight bar. The light bar features durable housing that won't rust, warp or crack,2" LED side marker lights for added side-view visibility, and a 4-waytransmitter with 1,000 ft. range. Two sturdy 100-lb. magnets securely hold barin place. Lights run up to 10 hr. between charges. Includes a 12V DC rechargecord.
This wireless 23-inch light-duty tow light is perfect for light and medum tows. Dual rubber-coated 105 pound pull magnets and wireless control allow for quick setup and low-profile design makes handlinng and storage a breeze. Made from heavy-duty poyethylene the light bar is highly durable and ready for and conditions. Auto grade circuitry ensures a long working life and individual serialization prevents crosstalk. The light bar is charged to be a cigarette plug while our removable bottom plage grants easy access to the battery.
This 48" Wireless Tow Light from TowMate comes with two built in amber strobe lights, marker lights on each end of the bar, and back up lights. In addition to the strobes, markers, and back up lights, this light will provide you with stop, tail, and turn signals with ease. Turning on the amber strobes is as easy as flipping a switch on the unit. The lights will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. Choose from any transmitter at no additional charge. The transmitter options include 4-PIN Round, 4 PIN Flat, 6 PIN Round, 7 PIN Round (Standard), 7 PIN RV Style, and a Hardwire Transmitter.
These high-intensity LED Wireless Tow Lights run 10 hr. on a single charge. Lights include 4-way transmitter with 1,000' range, char ge cord and rubber boots for magnets to protect against damage. 12V DC.
This 21" Wireless Tow Light from TowMate comes with a safety strip that offers four additional flash patterns. These patterns include: left to right, right to left, center out, and quad-flash. The unit will also provide the standard stop, tail, and turn signals with ease. Cycling through the flash patterns is as easy as pushing a button on the unit. Two powerful 100 lb. pull magnets make mounting this tow light easy and fast. The light will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. The system includes a transmitter, charge cord, foot covers, and instructions. Choose from any transmitter at no additional charge. The transmitter options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.
Prevent collisions by adding visibility to the towed vehicle! This lightweight, yet rugged PVC bar is easy to set up and doesn't have that metal rattle! It features sealed beam stop/tail/turn and marker lights, flush mount sockets and rectangular reflectors. This light includes four mounting U-bolts and four 20" rubber tie-down straps for attaching to the towed vehicle. <BR<BR Does not include power cable. Please see part number ST25AW for a 30' cable or ST55 for a 60' cable.
This Wireless Tow Light is a part of TowMates Trimline Series. It comes with light strips on the front and a marker light on each side. It will provide you with stop, tail, and turn signals with ease. There are two switches located on the top of these bars. One of these switches is the master on/off switch and the other controls the taillights. The units are lightweight, easy to transport, and offer a compact solution to bigger tow lights. The lights will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. Included in the system is a transmitter, charge cord, instructions, and rubber straps that are mounted on the top and bottom of these lights. Choose from any transmitter at no additional charge. The transmitter options include 4 PIN Round, 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.
Plug the transmitter into your truck?s socket, strap the Wide Load Bar onto the disabled vehicle using the (4) supplied rubber strap s and flip on the switch. The bars have a 1,000' range and run up to 10 hours on a single charge. To recharge, use the supplied 7-wa y round plug included with the bar.
The next generation of the TM36Li, this 36" wireless truck bar system provides 4" round- stop, tail, and turn w/ side marker lights on each end and three DOT lights in the center of the bar. Powered with our new internal 12000mah Lithium power supply, this is the most convenient heavy duty light bar on the market! This system comes complete with your choice of transmitter and standard 12v charge cord.
31" wireless trimline truck bar provides wireless stop, tail, and turn functions with additional side marker lights on each end. Rubber straps are mounted on the top and bottom of the unit for easy mounting. Two switches are located on the top. One master on/off and the other to control the taillights. The unit is lightweight, easy to transport, and offers a convenient and compact solution to heavy duty tow lights. (Uses two 12V1.3Ah Batteries)
These 16", 360 degree, strobe bars are the perfect emergency lights for your wrecker's tool box. They provide you with additional safety on the recovery scene, and they are wireless. Just turn the light on and the bright LED's will assist you in providing recovery safety. These light systems coms with a charge cord, carrying case, and key FOB remove switch.
Towmate's Rechargeable strobe units provide additional safety lighting and load marking at the flip of a switch. Mounts with powder coated metal plate. This system comes complete with two rechargeable strobe units and a dual ended charge cord to allow recharge of both units at the same time from a cigarette socket. The units measure 6"x6"x3". Lifetime warranty on electronics and LED's.
This Wireless Tow Light is a part of TowMates Trimline Series. It comes with light strips on the front, a marker light on each side, and back up lights. It will provide you with stop, tail, and turn signals with ease. There are two switches located on the top of these bars. One of these switches is the master on/off switch and the other controls the taillights. The units are lightweight, easy to transport, and offer a compact solution to bigger tow lights. The lights will now come standard with either a Carbon Fiber, or Diamond Plate finish. It will also be hydro dipped, which will give this bar a high sheen appearance and it will be much easier to keep clean. Included in the system is a transmitter, charge cord, instructions, and rubber straps that are mounted on the top and bottom of these lights. Choose from any transmitter at no additional charge. The transmitter options include 4 PIN Round, 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7 PIN RV Style, and a Hardwire Transmitter.
This 2.4GHz wireless tow light system comes with a light bar, transmitter and a charge cord. Simply plug the seven pin transmitter into your trucks seven pin connector. Turn on the truck bar by switching the on/off button. The taillights do not come on when the unit is powered on, only when the towing vehicles taillights are on. This is a tremendous battery saver. Once the transmitter is transmitting the bar will do what the truck instructs it to do. (Left or Right turn, Stop or Taillights) Light bars feature all L.E.D. lights, transmits up to 1000ft. If you forget to charge the bar, just plug in your 7 pin cable to run as a cabled unit. We offer a 3-year warranty on the circuit boards. Designed, Engineered, Manufactured, and Assembled in the USA by Custer Products / Lite It Wireless.