Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Easily recover heavy-duty trucks by turning your underlift stinger into a truck bar with this Chain Fork. Made from high-tensile steel and machined from a solid bar for extreme strength and durability. Grooved to accept 1/2" and 5/8" chains.
This two-part carbonless Towing Dispatch Log Book allows you to record the important data on each call while providing a copy for your drivers to take with them. Each form contains all the information you will need including club information, all vehicle information, equipment needed and more. Get 50 2-part forms in each spiral bound book.
Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.
Keep all your register forms neat, clean and organized with these Plastic Portable Register Form Holders. Cover provides a smooth, solid writing surface and used forms are stored in the back of the registers. Made of durable gray plastic.
This Pintle Hitch and Fifth Wheel Adapter from Miller Industries is designed to fit into the cast steel fork receivers. This will increase the versatility of your towing unit. Install it into the fork holders from the top of the wheel plate, or from the bottom using the King Pin Adapter. It also includes a Pintle Hook rated at 15 tons for maximum capacity when towing. This hitch also works as an adapter for the Miller Trailer Fifth Wheel Plate Part #124001833 and the Miller King Pin Attachment Part #124001948. (Does Not Fit 3212/V30) Shipped Loose. Fifth Wheel Plate and King Pin Attachments Not Included.
Use from the top of your fork holders with the 124001833 fifth wheel plate adapter
Use from the bottom of your fork holders with the 124001948 king pin adapter
Includes a pintle hook rated at 30,000 lbs. for towing
Zip's reflective vinyl pylon decals portray the "Slow Down Move Over" message in a visual way. They include a gloss overlaminate with a 2-mil film that can enhance gloss and provide additional ultraviolet and durable physical protection. They are not only a great decal for your vehicle but a portion of the proceeds will be donated to the Survivor Fund as well. These decals come in a variety of colors that are easily matched to your vehicle.
Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.
This Fork is used on a Gillis Bus. The bottom portion of the fork connects to the wheel lift and the top portion of the fork fits into the provided holes that are on the underside the Gillis bus.
This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.
These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.
This patented design from In The Ditch has a universal fit that allows you to use one hitch on different trucks. This hitch will be a real money maker for your truck. Stop sending two trucks to do the job of one. With this power hitch you can bring the customers pickup in on the deck and bring the trailer in on the wheel lift. The power hitch fits any wheel lift with 3" x 3" up to 4" x 4" crossbars, and works perfect on wreckers or carriers. The power hitch includes a 5th wheel hitch and goose neck ball. The power hitch pins on and off in minutes and has a 12,500 lb. rating.
The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.
This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.
These Double Tire Skates are made by Turtle Plastics. They are 6.5" wide x 17" long. The rope handle is for handling only and it is not designed to be used as an attachment or pulling point.
Zip's vinyl vehicle decals portray the message "Slow Down Move Over" in a visual way that can be placed on your vehicle. The decals feature a removable adhesive that will mount on your vehicle with ease and are durable and weatherproof for years of use. They are not only a great decal for your vehicle but a portion of the proceeds will be donated to the Survivor Fund as well. These decals come in a variety of colors that are easily matched to your vehicle and can be mounted on your vehicle window or bumper.
This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.
Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. Options: 22-pc. Axle Cap Set fits most major truck and bus hubs on the road, including Dana, Meritor and Mack.4-in-1 Axle Caps fit most 8-bolt tandem and large single axles - the most popular hub on the road.10-pc.
Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.
The Driveline Buddy tool offers a suspender and cradle that is easily installed into the frame of the truck being towed to cradle the driveline during transportation to final destination.
This T-Handle from Miller Industries is used on the Wheel Lift Assembly of several Miller Car Carriers. Please see the features below for a list of carriers, and see the brochure tab for breakdowns.