Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Commonly referred to as V-straps or V-chains due to their design, towing bridles are primarily used in the recovery industry for loading rolling vehicles up onto car carrier decks. Attached hooks and loops secure each end of the axle, and a center ring provides a single winch point for pulling the vehicle up onto the flatbed. Zip’s AW Direct’s large selection of bridle rigging assemblies offers varying leg lengths and capacities as well as loop and hook options, including R/T/J and mini-J hooks.
This V-Chain has two 2' legs with an 8" j-hook and hammerhead t-j combo hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.
Available in Classic or Tower's Edge webbing use these low profile V-Straps to prevent damage to the underside of the bumper or spoiler. These 3" V-Strap have two legs connected by a link with a 15" j-hook and a t-hook attached to the end of the each leg. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.
This V-Chain has two 3' legs with a 15" j-hook and mini j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.
These heavy duty V-Chain Bridle are perfect for loading and unloading heavier vehicles and equipment on your flatbed car carrier or trailer. These Grade 80 chain bridles have a working load limit of 12,000 lbs at a 60 degree angle which is great when loading heavy work trucks and equipment. These V-Chains have a 15" j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.
When you need a strong v-chain, the All-Grip V-Chain Assembly with 8" J / Mini TJ Combo Hooks has your back. This grade 70 v-chain is extremely strong. Plus it comes with two shortening hooks to adjust the chain to the needed length. Not to mention, the mini TJ combo hook offers a bit more variety.
When you need a strong v-chain, the All-Grip V-Chain Assembly with 8" J / Mini TJ Combo Hooks has your back. This grade 70 v-chain is extremely strong. Plus it comes with two shortening hooks to adjust the chain to the needed length. Not to mention, the mini TJ combo hook offers a bit more variety.
This Low Profile V-Chain has two 2' legs with an 8" j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
This Low Profile V-Strap has two 30" legs with an 8" j-hook attached to the end of each. Use the new Low Profile V-Straps from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.
This Low Profile V-Chain has two 2' legs with a 15" j-hook and a t-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
With the All-Grip V-Strap Assembly with Short J/Mini J and T Hooks, you can evenly pull a car onto the car carrier with ease. With the forged J hook and combo mini J&T hooks provide both durability and versatility. Plus, the two-ply material and how it’s reinforced makes it even more durable. Finally, it’s strong enough to handle up to 4,200 pounds.
This high quality loading bridle was designed with cordura material to reduce the wear and tear when loading and unloading passenger vehicles. The light duty loading bridle is of the highest quality and carries mini-J and R hooks on the cluster. Each leg of the bridle has a permanent sewn on wear pad.
Zip's V-strap assemblies feature a low-profile design which improves undercarriage clearance when loading disabled vehicles onto car carriers. A 15' J hook is affixed to reinforced eyes at the end of each leg, and an oblong link at the center creates a horizontal plane for winching. Two sizes available.
With the All-Grip V-Strap with 15" J Hooks, you can protect against damage to the underside of the bumper or spoiler. Thanks to its two-ply material with tapered eyes at the pear link, there is extra durability. Plus, it’s reinforced by the hook, making it even more durable.
The polyester material in this V-Bridle prevents abrasions and damage you would get from a chain. The 15"L J-Hook is made with Grade 70 5/16" hardware and hooks easily around axles. Double-ply 2'L legs are made with high-strength, reflective gray webbing for nighttime visibility. PVB coated to resist chemicals, UV rays and dirt ? prolonging the life of the bridle. Great for frequent, rugged use.
This Low Profile V-Chain has two 2' legs with an 8" j-hook and t-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
Available in Classic or Tower's Edge webbing These Low Profile V-Straps have an 8" j-hook attached to the end of each. Use the new Low Profile V-Straps from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.
This Low Profile V-Chain has two 2' legs with an 8" j-hook and mini j attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
The All-Grip V-Strap with 15" J Hooks and TJ Combo has multiple attachment options giving you better convenience. Plus it is very durable. Its two-ply material with tapered eyes at the pear link gives it additional abrasion resistance.
Get multiple attachment options with this Cluster Bridle. The double-ply 3"W strap features Grade 70 5/16" steel hardware and is made with reflective gray polyester webbing. PVB-coated to resist chemicals, UV rays and dirt?prolonging the life of the bridle.
This Low Profile V-Chain has two 3' legs with a 15" j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
This Low Profile V-Chain has two legs with a r-hook, t-hook and mini j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
The All-Grip Axle V-Strap is extremely durable. With built-in wear pads at the axle area, the strap will last longer as it’s less prone to wear. Plus, it protects the operators from electricity as there is no metal-to-metal contact. Finally, with a working load limit of 5,800 pounds.
Straps help you avoid metal to metal contact with your customer's vehicle. Multiple attachment options and styles to suit your loading needs. Reflective gray polyester webbing is PVB-coated for resistance against chemicals, UV rays and dirt. TPV70H and TPV70M are low profile, further helping to reduce damage to the undercarriage of your customer's vehicle.