Towing Straps & Chains

These Grade 70 Safety Chain assemblies are 5/16" include a grab hook at one end and an r-hook, t-hook and mini j-hook on the other end. Carrier safety chains can be used as primary or secondary securement chains on all types of carriers. All chains are completely zinc plated and all hooks are forged, heat treated steel.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps. These 3" wide tie-downs are 64" long and come with ratchets and protective sleeves.

This 5' Trailer Plate and Frame Rail Chain is from B/A Products. This exclusive chain assembly is available as a single or a set of 2 chains that each feature a flat throat hook at one end and a grab hook at the other. This chain assembly has a working load limit of 15,000 lbs. per assembly. This flat hook can be used to hook directly into a frame rail or trailer plate pocket unlike a grab hook that is required to be hooked back into a chain.

These Zips 2" tie-down straps come with a flat snap hook attached at one end of each. A cordura sleeve provides added protection on each strap. These straps are commonly used on Dynamic Tow Trucks. Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift.

AW Direct Wheel Lift Strap with a D-Ring is perfect for securing vehicles on a wheel lift of a tow truck. This durable strap is available in six lengths and features abrasion-resistant webbing. This strap has a width of 2" and can be used in many other securement applications.

This grade 70 Ultimate Axle Chain is 5/16" x 3' and comes with a grab hook and slip hook on one end and an 8" j-hook on the other end. The Ultimate Axle Chains allow you to quickly and easily chain up forward axles of tractors when performing a rear tow.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps. These 2" wide tie-downs are 76" long and come with ratchets and protective sleeves.

AW Direct 8 Point Tie-Down Kit with Chains includes four (4) winch straps with 12" chain ends, four (4) standard ratchets with chain ends and four (4) dogbone straps to secure most vehicles to a car carrier flat deck. The webbing is abrasion resistant and heavy-duty hardware holds up to repeated use. These tie-down assemblies are available in two lengths, 14' or 18'.

Zip's J-chain assemblies include a 15" J hook on one end of the Grade 70 5/16" chain and a grab/T/R/mini J hook cluster on the other end. Choose from three lengths.

Available in Classic or Tower's Edge webbing these 2" wide tie-downs are 66" long and come with ratchets and protective sleeves. Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps.

These Zinc Plated 5/16" X 8' Chain assemblies include a Grab Hook,Mini-J, & T-Hook at one end and a Long J-Hook at the other end for hook up options.

Zip's V-chain assemblies include a 15' J hook and hammerhead T/J hook cluster with a pear link and grab hook at the center. The Grade 70 5/16" chain has a working load limit of 5,400 lbs. at a 60-degree angle. The pear link provides a dedicated pull point. The larger J hook enables quick hook up to a vehicles rims.

Tie-Down Kits have straps that wrap around all four tires of the towed vehicle which prevent damage and maximize safety. Gradual-release ratchets reduce the risk of accidents with a one-of-a-kind buckle that features a step-by-step controlled gradual release action.

Available in Classic or Tower's Edge webbing these Low Profile V-Straps have a 15" j-hook attached to the end of each. Use the new Low Profile V-Straps from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.

Available in Classic webbing these 3" 3 ply Axle V-Straps comes with two legs that are connected with a pear link that is connected to an oblong link. These axle v-straps come with protective sleeves for extra durability and wear resistance. The new Low Profile Straps from B/A reduce the damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the top of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

Zip's Replacement Tie-Down Strap with Chain is available in two lengths and features abrasion-resistant webbing. The attached chain end measures approximately one foot.

Available in Classic or Tower's Edge webbing these Low Profile V-Straps have two legs with a three hook cluster attached to the end of each. The hook clusters includes an r-hook, t-hook and mini j-hook. Use the new Low Profile V-Straps from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.

Available in Classic, Tower's Edge or Heavy Duty webbing these 2" straps come with a mini j-hook attached at one end. Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift.

This Grade 70 Chain is 5/16" and includes a 15" j-hook at one end and a grab hook and t-hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.

Zip?s V-chain assemblies include an 8? J hook and a mini J hook cluster with a pear link and grab hook at the center. The Grade 70 5/16? chain is available in two leg lengths with a working load limit of 5,400 lbs. at a 60-degree angle. The pear link provides a dedicated pull point, and the larger J hook provides a quick connection to a vehicle?s rims.

Get yourself an axle strap that will hold up. With no metal-to-metal contact, you can prevent damage; plus, the Cordura sleeve protects it from abrasions and cuts. This lets it last longer than most 2-ply axle straps.

These Grade 100 Axle Chain Assembly Kits have two 6' axle chains with an omega link attached at one end of each chain. Kits also include a QuickBinder Plus with a folding handle. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting. To use this axle chain you slip the chain through the clevis and use it as a choker on the axle. Then you are able to use a binder to hook on to chain and secure it to the under reach.

These unique straps feature magnetic ends that stay together for quicker and easier attachment. Use as a tie-down around the axle, through the rim, or as a secondary safety attachment. Heavy-duty 2"W reflective gray polyester straps feature a 3,300-lb. WLL. Straps are PVB coated to resist chemicals, dirt, water and UV rays. Finished edges resist abrasion.

Available in Classic and Hi-Viz webbing these Auto Tie-Down Strap Assemblies come with a three hook cluster attached at one end and a chain on the other. The straps are 8 feet long with a 2" wide handle ratchet for easy use.

This Tie-Down System is simple to install, yet provides a secure, damage free tie-down. System doesn't touch a vehicle's suspension, chassis or body, thereby preventing any damage that might occur when using chains. This kit is completely adjustable to fit any car or truck tire size. This system includes: four 14' long straps with chain ends, four short straps with lined eyes and four gradual release ratchets with chains.