Work & Truck Lighting

This cutting-edge lighting solution is not only DOT FMVSS108 compliant but also offers an array of features and benefits that will exceed your expectations.

IP68 Dual Color Flexi-Tape is our long-life, low-power-consuming, waterproof Flexi-Tape. Its three-wire construction allows for color control, illuminating both or just one color for your desired lighting effect.

Universal License Plate Bracket.

Dry-Fit STT Plug with 10" Leads, from Maxxima.

Maxxima Stainless Steel ID Bar with 3 Maxxima M11300Rs. Total of 39 LEDs. This light is a surface mount ID bar with 2 mounting holes , polished stainless steel, and 100,000 hour rated LED Life.

This dual-switch Rechargeable Dual-Light Work Light from Bayco Products is one of the most versatile lights available. It is actually two lights in one...a spotlight and a floodlight. Rated at 200 lumens, the spotlight beam on this light puts a beam of light exactly where you need it. This unique work light also has a non-focused 170 lumens floodlight built into the handle. Because the floodlight does not have a reflector, the light spreads out in a wide even pattern of light expressly for the purpose of lighting up areas that are close by. Now you have two completely different patterns of light for whatever work needs to be done...a spotlight for locating the problem, and a floodlight for lighting up the area while the problem is being fixed. You can even turn both lights on at the same time for even more lighting options.

This Maxxima Interior Cargo Light with PIR Sensor is a rectangular 800 lumen flush mount with a frosted lens. The PIR Sensor has a three-minute timeout.

6 LED stop/tail/turn light.13A draw12.8V6-2/5"WGrommet mountingRated for 100,000 hours of lifeOval. Red.<BR<BR

A high power LED light. Mounts to the body using screws (not included). Sealed electronics are weather resistant. Includes a plastic chrome/black bezel, flange-mount, and a short wire. Draws low energy, operating on just .5A. Standard Vehicle Power: 12V DC

Buyers Products 4 Inch Round Backup Light with 10 LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations. The light has a clear lens and uses a standard PL-2 connection.

This is a 3.5" work light by ABL Lights. This flood light runs off 12 volt DC and has an output of 55 watts. The pigtail connector is sold separately. The pigtail connector for this light is part number ABL14-592.

These trailer lights feature 12 stop/tail/turn LEDs and marker light with 6 LEDs. Both have rugged acrylic lenses, a high impact housing and two mounting studs on the back. Gasketed lenses prevent water from reaching the LEDs making this a submersible tr<BR<BR

This Maxxima 3 White LED Projector Light has a surface bracket mount and two blunt cut leads. Maxxima's projector lights can be used on work trucks, landscaping vehicles, marine applications, or any other function where you need a durable clear bright light to guide your way!

Streamlight's Propolymer 3C LED battery-powered flashlight features 10 super-bright, white LEDs that will last up to 100,000 hours so you'll never need to replace a bulb again. The flashlight is also remarkably comfortable to use because it's ergonomically shaped for your hand. It is constructed of impact-resistant polymer with a rubber face cap, a momentary "blink" or constant "on" tailcap switch, and an unbreakable polycarbonate lens. Approved for use in hazardous locations.

These are 6 LED 5" Round Work Lights by Maxxima. They include stainless steel bolt and bracket for mounting. Maxxima's heavy duty work light provides a 550 Lumen super bright flood beam pattern, which is perfect for all work and equipment vehicles. Ideal spreader light for salt/sand trucks. Includes 2 blunt cut leads and comes with a 5 year warranty.

The M85437R-WL is a 5.5" Round, Flange Mount, Combination Stop/Turn/Tail (STT), Back-up (BU) Light, and LED Work Light. Maxxima's patented LED Flange contains 9 White LED's that operate in back-up light or work light mode. In addition, our patented Lightning Optics provide superior off-axis visibility for improved driver safety. 5 discrete wires allow the Work Light wire to be connect to a dedicated switch (user supplied) to activate the Work Light independently of the STT & BU functions. M85437R-WL is thin-profile at 0.5" depth and is backed by a 5-year warranty.

The new Hella Valuefit work lamp series offers powerful light output in a compact and attractive design. The new Hella Valuefit work lamp series is also equipped with a thermal sensor that adapts to the ambient temperature. This new feature not only prevents overheating or LED failure, but also increases light output when the ambient temperature is low.

Add visibility to your truck by replacing factory cab lights with Atomic LED Pro Series Strobing Cab Marker Lights. These lights feature six different flash patterns including steady burn. Lights fit 2003-2017 Dodge Ram trucks. Amber LEDs. Kit Includes: (5) Cab lights, (5) Rubber gaskets and (1) Alternating flasher.

The E-Series is one of RIGID s most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID s most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

The Streamlight 44451 Fire Vulcan is a rechargeable LED lantern that features dual rear LEDs and a quick-release shoulder strap. As part of Streamlight’s family of safety-rated lights, this orange, high-intensity lantern is waterproof and is so lightweight it will float in water. The LEDs are backed by Streamlight’s C4 technology for extreme brightness and offer a 50,000-hour lifetime.

Wabash and Monon replacement. Lamp designed for PC requirements on a 45-degree angle in mounting devices #30720, #00801, #00803, #00804 or surgace mount flange. Replaces Signal-Stat 1030 series.

Super 21 Diamond Shell Marker & Clearance Light. Option of red or amber lens color and built with a super 21 plug. This light meets P2/PC standards.

Enhance the visibility and style of your vehicle with our exceptional LED License Plate Light and Mounting Bracket. This high-performance accessory offers a multitude of benefits, ensuring both legal compliance and an impressive aesthetic upgrade.