Work & Truck Lighting

Enhance your lighting experience with the Golight GT Pan and Tilt Motor - the essential accessory for your Golight GT series units. With this cutting-edge device, you'll experience a new level of control and convenience, all at the touch of a button. Let's explore how this powerful motor can transform your lighting experience.

Enhance your lighting experience with the Golight GT Pan and Tilt Motor - the essential accessory for your Golight GT series units. With this cutting-edge device, you'll experience a new level of control and convenience, all at the touch of a button. Let's explore how this powerful motor can transform your lighting experience.

Upgrade your lighting experience with the Golight Gobee Receiver. This innovative device revolutionizes the way you control your Golight Gobee light. With its wireless handheld remote control, you gain full command over your lighting setup with just a press of a button.

Experience seamless control with the 20-foot Golight GT Harness. Designed specifically for Golight GT series spotlights, this high-quality wiring harness effortlessly connects your light to the remote control, transforming the way you adjust and position your lighting.

Experience lighting control like never before with the Golight Stryker ST Receiver for the wireless remote control. This cutting-edge electronic device revolutionizes the way you interact with your Golight light, giving you complete command with just a click of a button.

This 4" Round Amber Turn Signaltech LED Light is from Federal Signal. The Signaltech technology features a high-impact resistant polycarbonate housing and LED technology that reduces the cost of maintenance. The light was designed around emergency vehicle specifications and designed to meet the demands of a variety of work zones including construction, municipal, utility and tow and recovery. This light has a triple sealed plug that allows for easy installation to existing circuits. The lights operates at 12 or 24 VDC and a regulated for consistent light output.

Illuminate your off-road adventures with the Golight GXL Off-Road Scene LED Light. This powerhouse of a lighting solution is built to withstand the toughest conditions while providing a range of benefits that will take your off-road experience to the next level.

Enhance your lighting experience with the Gobee Pan and Tilt Motor - the essential accessory for your Golight Gobee unit. With this cutting-edge device, you'll experience a new level of control and convenience, all at the touch of a button. Let's explore how this powerful motor can transform your lighting experience.

Protect and enhance your Golight Gobee Halogen Scene Light with the Golight Gobee Lamp Bezel.

This clearance and marker light is designed with a Fit 'N Forget M/C lamp connection. Most advanced and cost effective 2" clearance and marker lamp. P2 and P3 standards met.

Hardwired design eliminates pin corrosion. Encapsulated electronics with 16 diode double bullseye LED pattern.

Hardwired design eliminates pin corrosion. Encapsulated electronics with 16 diode double bullseye LED pattern.

Reflectorized lens on colored lens versions. Optional mounting and sealing gasket available to improve seal between lamps. Less susceptible to shock and vibration.

Truck-Lite 60201Y is a 6-1/2 oval amber, single-bulb Super 60 Series incandescent rear Turn light. The grommet-mounted light can be positioned vertically or horizontally, and a PL-3 plug secures the wiring connection. The light s electronics are completely sealed in epoxy to resist corrosion and moisture, and the impact-resistant polycarbonate lens is sealed for further protection from the elements. This turn signal light meets SAW J2039 requirements.

Truck-Lite 60215Y is a multi-function 6-1/2 oval amber, single-bulb 60 Series incandescent Turn light offering side indicator, marker/clearance and reflector functions. The grommet-mounted light meets the Meets SAE J2039 recommendation, and the raised profile offers 3D visibility from several angles. The light s electronics are completely sealed in epoxy to resist corrosion and moisture, and the impact-resistant polycarbonate lens is sealed for further protection from the elements. A standard PL-3 plug secures the wiring connection.

Excellent choice for interior applications such as truck cab, walkways, glove boxes, step lights, puddle lights and more. Creates additional options for improving custom look and theme of vehicle exteriors, mounted on separate switch. Hardwired lamp design easily retrofitted|Low profile reduces damage from impact. LEDs draw less current, allowing more power for other vehicle requirements. Reduces lighting costs due to physical damage and heat entrapment. Electronics completely sealed in epoxy to resist corrosion and moisture. Designed for auxiliary lamp use only. US Patent #6612728. Not recommended for marker/clearance purposes.

Innovative optic design allows combination lamp to function as two. Draws less current, allowing more power for other vehicle requirements. Designed to fit applications requiring minimal space. Must be mounted horizontally. PC-rated lamps meets requirements when mounted on a 45-degree angle. Standard red lamps have 2 diode pattern. PC-rated red lamps and standard yellow lamps have 4 diode pattern.

High-impact black polycarbonate housing will not rust or corrode. Lamp grounds through mounting stud. Snap-grip lens simplifies bulb replacement.

30 Series high profile LED marker clearance light is designed with 8 diodes and built as a red round light with a gray flange mount. Most advanced and cost effective 2" clearance and marker lamp. LEDs have no filament, therefore are not susceptible to shock and vibration. Less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. SAE PC-rated for combination clearance/marker applications.

For applications with vehicle width under 80" wide. Built as a two wire, stop, tail, and trun lamp. 1 stud mounting style with a hardwired and stripped end plug. Option of amber or red incandescent lamp style.

Hermetic lens-to-housing seal. Encapsulant potting for total circuit board protection. Lens design spreads light for maximum dispersion. Advanced pin connection system uses tin-plated, solid-brass pin terminals.

Upgrade your trucking and towing experience with our LED Adhesive Glow Strip. The strip comes in amber, red, or white options. Designed specifically, although not exclusively, for the trucking and towing industry, this versatile strip provides unparalleled visibility and safety. The soft, captivating glow ensures enhanced visibility on the road, reducing the risk of accidents and improving overall safety. With its most captivating feature, outfitting your vehicle with this glow strip is a breeze. Adhesive tape or hold-down clamps is all that is required and necessary for installation. Additionally, its durable PVC lens and housing withstand harsh weather conditions and rigorous use, ensuring reliable performance mile after mile. But that's not all. The energy-efficient LED technology helps you save on energy, maintenance, and replacement costs, all while providing long-lasting illumination. So don't miss your chance. Illuminate your truck or towing vehicle with confidence, knowing that our LED Adhesive Glow Strip is built to withstand the demands of the industry. Upgrade your fleet today and experience the difference Maxxima's glow strip brings to your trucking and towing operations.

Faster illumination offers significant safety benefit for following drivers to react quicker, resulting in an average distance of 3' for every 10 mph design results in decreased depth compared to integral plug versions, allowing for mounting in confined spaces. LEDs have no filament, therefore are extremely resistant to shock and vibration and less current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements.

Being able to see what you’re doing is essential for any job you’re working on. With the Rectangle IQ Series Auxiliary LED Flood Beam Light from Race Sport, you won’t miss anything. This industrial-grade light puts other LED lights to shame by shining three to five times brighter than them.

Illuminate your workspace with the unbeatable power of the Maxxima Work Light. This compact, surface-mounted LED work light/scene light is a game-changer for those seeking superior lighting solutions. With a lumen output ranging from 1,600 to 2,600, this light radiates brilliance, ensuring maximum visibility and productivity.