Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
B/A Products was started as a storefront in Florida in 1978. Since then, B/A has grown into a business dedicated to creating innovative products to increase safety across the towing, over-the-road, agricultural, construction and automotive industries. Browse our line of premium products from B/A Products, including straps, chains, snatch blocks, hooks, winch cables and more.
This grade 70 Ultimate Axle Chain is 5/16" x 3' and comes with a grab hook on one end and a 8" j-hook on the other end. The Ultimate Axle Chains allow you to quickly and easily chain up forward axles of tractors when performing a rear tow. Also check out part number
These tie-downs come with a ratchet and a double j-hook attached at each end of the straps. Use Cargo Tie-Down Straps to secure your equipment and cargo in truck beds, trailers, and carriers. Easy to use ratcheting makes tightening and securing your load fast and easy.
This light consists of two LED Sealed Beam Truck Light in a rubber housing with round magnets, a 25' 4 way cord, and a 6' cord between the lights. This does not include a storage box, or a CR-6 tow light plug.
This is a B/A 2" Rubber Handle Gradual Release Ratchet with forged finger hook. This is an easy to use ratchet with a comfort rubber grip handle. This ratchet makes unstrapping a load quick, easy, and safe. It has a step-by-step controlled gradual release action that reduces the risk of accidents. It also creates less wear and tear on the ratchet. Stamped into each handle on the ratchet is a Working Load Limit for easy identification.
This replacement strap ratchet has a durable design that meets or exceeds OEM specifications and offers a patented double locking mechanism. This 2" ratchet comes with a forged finger hook.
The alternate to the grab hook, the slip hook allows the chain to "slip" through the hook. This heat treated hook comes with the clevis pin and cotter pin to easily attach to your chain.
Grade 100 Chain is produced from special alloy steel and has a gray protective coating. Grade 100 chains have a 25% higher work load limit compared to Grade 80. Chain meets or exceeds NACM, ASTM and OSHA specifications. Grade 100 is approved for overhead lifting.
Note: Special Handling Fees Apply for Specific Items
This Load Measuring Stick from B/A Products has a new and improved four stage telescoping design. This four stage design will collapse down to 53" for convenient storing and shipping. It extended to a height of 15' or 20' with a 4' cross arm and comes marked with both standard and metric measurements. A rubber foot helps it grip the pavement and protects it from damage.
Both metric and standard
15' or 20' tall
4' cross arm
Collapses to 53"
Includes Velcro carrying bag with handle
Fluorescent safety green color for high visibility
The Driveline Buddy tool offers a suspender and cradle that is easily installed into the frame of the truck being towed to cradle the driveline during transportation to final destination.
The container eye link is intended to be used in the corner eyes of shipping containers as an attachment point for rigging to assist in up righting overturned containers. By using a shoulder bot, nut and pin, it becomes a terminal connections. This link is a must for any situation involving an overturned shipping container! The working load limit is 35,300 lbs with a 4:1 safety factor.
This Low Profile V-Chain has two 2' legs with an 8" j-hook and hammerhead t-j combo hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
Available in Classic, Tower's Edge webbing these Low Profile V-Straps have two 24" legs with an 8" j-hook and hammerhead t-j combo hook attached to the end of each. Use the new Low Profile V-Straps from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.
These Grade 100 Chain Assemblies are 2' long with an oblong link attached at one end and a foundry hook on the other end. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting.
This replacement strap ratchet has a durable design that meets or exceeds OEM specifications and offers a patented double locking mechanism. This 2" ratchet comes with a snap hook.
These heavy duty V-Chain Bridle are perfect for loading and unloading heavier vehicles and equipment on your flatbed car carrier or trailer. These Grade 80 chain bridles have a working load limit of 12,000 lbs at a 60 degree angle which is great when loading heavy work trucks and equipment. These V-Chains have a 15" j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.
This V-Chain has two 2' legs with a 15" j-hook and hammerhead t-j combo hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.
This Basket Style Strap is used to hold the tire in place, just put the strap over the tire and secure it for a tight fit. Large strap comes with one cross strap, two t-hooks attached at one end and a chain on the other. This basket strap is commonly used on Century Tow Trucks.
Available in Classic or Tower's Edge webbing these 3" 3 ply Axle V-Straps come with two legs that are connected with a pear link and have a flat hook and link connected to each. The legs come with a protective sleeve for added durability. Use these straps to prevent damage to the underside of the bumper or spoiler.