SaltDogg

Buyers Products SaltDogg Bulk Salt Walk Behind Broadcast Spreader features a bulk flow gate to handle bulk salt. That gives contractors, facilities managers, and property owners the ability to use the bulk salt that is used with the rest of their spreader line-up with the walk behind. The manual spreader broadcasts material up to 24 ft. The enclosed gearbox with commercial grade alloy gears and an integrated grease fitting ensure that the moving parts of the spreader are out of the elements and are easy to maintain for years to come.

The SaltDogg TGSUVPROA 4.4 Cubic Foot Tailgate Spreader features vertical auger assist and an optional vibrator kit that make it a more robust version of the popular TGSUV1B. With a compact size and hitch-mount design, it's a great material spreader solution for an SUV or a 1/2 ton, 3/4 ton, or 1 ton truck. This spreader features a corrosion-resistant 4.4 cubic foot poly hopper. Its hitch mount can fold away for easy tailgate access and is compatible with 2 in. Class 4 receivers.

This is a replacement spinner for SaltDogg Spreaders.

53" Electric Polymer Salt and Sand Spreader, Dimensions; 53 x 48 x 28, Capacity; 0.75 cu. yds., Weight; 280 lbs, Screw Type Auger Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 5-30 feet, Standard Chute, Recommended Use; Utility Vehicles, 1/4-Ton, 1/2-Ton & 3/4 Trucks

96" Gas Slide-In Spreader, Dimensions; 113" x 47" x 32.5", Weight; 945 lbs., Conveyor Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 2-30 feet, Standard Chute, Recommended Use; 3/4 or 1-Ton Trucks

This is a replacement spreader speed controller by Buyers Products. This controller is used to control the speed of the spreader. This controller will work on all of the SHPE series SaltDogg spreaders.

The most cost-effective commercial grade spreader to maintain large commercial grounds. Attractive and rugged polymer black hopper and orange powder coated steel mounting frame to resist rust and corrosion. Heavy-duty 12-volt spreader is housed in a sealed motor chamber. Material flow and spreader and spreader width, from 3ft. to 30ft. are controlled from an in-cab electronic spreader control panel. Ultra-smooth hopper interior, in addition to the auger design, provides for easy material flow and reduced material "bridging".

This is a SaltDogg Spreader 12 Volt DC .75 Horsepower Gear Motor - Fits: 92440SSA, 1400600SS, 1400700SS, 5535000.

Buyers Products stainless steel pin includes everything needed to use this products. The stainless steel finish helps protect against dings and scratches.

Universal 7 & 9 Light Wire Harness. Used with SD-LB8663SST lightbox. Helps eliminate wiring errors & reduces installation time. 9 prewired snap-in plugs for two or three prong lights. 2 blunt cut ends for optional end markers. Extra long harness for flexible lighting positions. All wires are protected inside of wire loom.

53" Electric Polymer Salt and Sand Spreader, Dimensions; 53 x 48 x 28, Weight; 289 lbs, Screw Type Auger Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 5-30 feet, Extended Chute, Recommended Use; Utility Vehicles, 1/4-Ton, 1/2-Ton & 3/4-Ton Trucks

One piece fully-welded carbon steel frame. Large 13" pneumatic tires make pushing through slush and ice a breeze. Adjustable spreader path from 3ft. - 30ft. Large flow regulator on handle offers ease of operation. Solid control linkage eliminates sticking and stretched cables. 3-flap adjustable poly deflector controls spread pattern (ideal for sidewalks near sensitive foliage, etc.). Additional fixed rear deflector protects operator's feet. Ergonomic handle. Expanded metal hopper screen helps prevent material jamming. Includes a durable, double stiched plastic rain cover to protect from, moisture and spillage. Heavy-duty stainless steel gears for added strength.

This is a 1/2" Spinner Shaft from Buyers Products.

This is a SaltDogg harness, shape controller.

Buyers Products SaltDogg Cubic Yard Gas Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a 50/50 salt/sand Its. The spreader combines the power of a gas engine with modern spreader conveniences. mix.

This is a SaltDogg TGS Series Vibrator Kit.

96" Electric Stainless Steel Slide-In Spreader, Dimensions; 113 x 47 x 33, Capacity; 2.0 cu. yds., Weight; 750 lbs, Conveyor Feed Mechanism, 11.5" Polymer Spinner, Spread Width; 2-30 feet, Adjustable Chute, Recommended Use; 3/4 or 1-Ton Trucks

This is a replacement 1" carbon steel Bearing.

This product is a 12-Light LED brake light designed to be used with the SaltDogg TGS series of tailgate Salt Spreaders.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 105-gallon polymer reservoir (69"L x 20"W x 25"T). 12-volt, 3 GPM/45 PSI electric diaphragm pump. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

Direct Drive Under Tailgate Spreader. Dimensions; 98" x 19" x 17". Weight; 510 lbs. Screw-Type Auger Feed Mechanism. 18" Polymer Spinner, spread width; 5-30 feet. Recommended Use; 3/4 and 1-Ton Trucks.

This is a SaltDogg dumpbody tailgate latch kit, use on 3-9 YD spreaders.

This is a replacement universal spinners & hubs counter clockwise. S.A.M.

Direct Drive Under Tailgate Spreader, 5:1 Reduction Ratio Gearbox, Dimensions; 98" x 19" x 17", Weight; 405 lbs., Screw-Type Auger Feed Mechanism, 18" Polymer Spinner, Spread Width; 5-30 feet, Recommended Use; 3/4 and 1-Ton Trucks

This is a SaltDogg TGS Series Vibrator Kit.

SaltDogg tailgate spreaders gearbox only.

2" Receiver Tube Mount fits TGS01 & TGS05 series. Was designed to fit 2" receivers. These mounts allow you to mount and dismount spreaders quickly and easily. Fits most pickup trucks regardless of tailgate width.

Stainless Steel Direct Drive Under Tailgate Spreader. Dimensions; 98" x 19" x 17". 15" Side Pill Plates. Weight; 392 lbs. Screw-Type Auger Feed Mechanism. 18" Polymer Spinner. Spread Width; 5-30 feet. Recommended Use; 3/4 and 1-Ton Trucks.

This is a SnowDogg chain-type tie down kit, use on 3-9 YD spreaders.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 105-gallon polymer reservoir (69"L x 20"W x 25"T). Hydraulic, 4.5 GPM@1,750 RPM (150 PSI) with proportioning valve, bronze pump, bronze gears, stainless steel shaft. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

In-Bed Liquid Spray Kit, 2" Hitch Mounted, 12 VDC, 28 Amps Maximum, 335 Gallon Poly Reservoir, Stainless Steel Pump Housing, 160 lbs., One Person Installation

This mount is for the TGS05 & TGS01 series tailgate spreaders. It allows you to enjoy the benefits of easy access to your pickup truck bed. Wintergate mounting system accommodates any domestic, full-size pickup truck width. It allows yo to remove 2 quick pins and rotate the entire spreader out of the way for full-bed access.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. (2) 105-gallon polymer reservoir (69"L x 20"W x 25"T). Hydraulic, 4.5 GPM@1,750 RPM (150 PSI) with proportioning valve, bronze pump, bronze gears, stainless steel shaft. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

These SaltDogg Spreaders by Buyers Products are designed for dump bodies and flatbeds with a 13,000 lb GVW. They are available with 96", 108", or 120" hoppers with a capacity from 2.5 to 3 cubic yards. Theses spreaders can come equipped with a Gas Engine, Electric Motor, or a Hydraulic Motor depending on what works best with your intended application. The gas powered spreaders come with a 10.5 HP gas engine with convenient electric start and throttle control. The electric powered spreaders come with two independent electric motors, one for the conveyor and one for the spinner. The hydraulic powered spreaders come with two independent motors for independent conveyor and spinner operation. These spreaders work great with bulk salt, bulk sand, or a salt and sand mixture. These are quality spreaders that are made here in the USA.

Stainless Steel Electric Drive Under Tailgate Spreader, Dimensions; 99" x 22.5" x 17", Weight; 575 lbs., Screw-Type Auger Feed Mechanism, 14" Polymer Spinner, Spread Width; 5-30 feet, Recommended Use; 3/4 and 1-Ton Trucks

This is a SaltDogg Spreader 12 Volt DC .75 Horsepower Gear Motor - Fits: 92440SSA, 1400600SS, 1400700SS, 5535000.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator.

These replacement tailgate spreaders from Buyers Products are designed to fit in place of the tailgate on a 1 ton super duty dump body. They have a 6" auger and are made from 304 stainless steel construction. These spreaders are ideal for dump bodies with low ground clearance. These spreaders are available with center or driver side discharge and available with electric or hydraulic power options. These spreaders have an 18" poly spinner that casts material with 25'. These are quality spreaders that are made in the USA.

This is a hose reel SS with an adjustable spray nozzle, use with in bed liquid spray.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SHPE1500/2000 series spreaders.

This is a hose reel with an adjustable spray nozzle, use with in bed liquid spray.

This is a replacment Fisher trip spring nut. S.A.M.