Zip's Custom

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

• Custom built by Zip's
• Choose between the 12 & 16 Series or 10 Series Car Carrier
• Available in Galvanized or Painted finish
• Single or Dual square tubing
• Underside mount
• Subframe drilling required
• Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker.

These quality tow dolly mounts from Zip's were specifically designed to be installed on any self-loading wrecker built by Miller Industries. Select from two different item numbers to accommodate either Collins or In the Ditch branded dolly sets. Mounted on the rear slope of the wrecker body for quick and ergonomically-friendly access to the dolly, these brackets are perfect for the serious light duty towing operator. We try to make your life a little easier and safer on the road!

Zip's Snatch Block Storage Bracket. Designed specifically for the snatch blocks to be stored by the hook. The bracket can typically store up to 4 blocks at a time. 17.5" Long. Heavy Duty Aluminum Construction. Bolt-on installation.

Free up valuable storage space in your light-duty wrecker body with these surface-mount GoJak dolly mounts from Zip's. The black powder-coated steel rack is bolted to the deck of the wrecker and is angled to account for the slope of the wheel well. The GoJak dollies slip vertically into the welded 2" receiver tubes and secured for transport with two hitch pins.

This is a Zip's Custom aluminum snatch block and chain bracket. This bracket allows you to customize your toolbox to make you more efficient. This is a simple bolt-on bracket that has a variety of uses. It can hold your snatch blocks, your chains, or both. This bracket is 16" long.

Note: Special Handling Fees Apply

The Basic Car Carrier or SidePuller Recovery Kit From Zip's. Includes Snatch Blocks, Shackles, and a G80 Chain. This Kit Will Allow You To Expand The Recovery Capability of Your Car Carrier or SidePuller.

Kit Includes:

• (6) - ZAS34 - Zip's Anchor Shackle - 3/4" - 7,000 kgs / 15,432 lbs
• (1) - Z38G810G - Zip's 10' Chain Assembly with Grab Hooks - Grade 80 - 3/8" - 6,930 WLL
• (1) - ZSB4T4SC - Zip's Snatch Block with Chain & Grab Hook - 4" - 4 Ton
• (1) - ZSB4T4 - Zip's Snatch Block with Swivel Hook - 4" - 4 Ton

Miller Industries has already increased the versatility of heavy-duty wheel lifts with its pintle hook adapter. Now, add more functionality to the back end of your wrecker with Zip's Gooseneck Trailer Adapter. With an included 2-5/16" ball, this improved gooseneck adapter replaces the pintle hook on Miller's original wheel-lift adapter. This universal attachment allows the operator to tow and relocate cargo, flatbed, livestock and other trailers with this style of connection.

Miller All-In-One Heavy Duty Towing Hitch Attachment Kit. This Convenient Kit Includes Everything You Need to Tow a Trailer With Your Century and Vulcan Heavy Duty Wrecker. This Heavy Duty Accessory Kit Includes a Pintle Hitch Adapter (part #124002211), 5th Wheel Plate (part #124001833), King Pin Attachment (part #124001948), and a Trailer Ball Attachment (part #124002431). The Pintle Hook Has a Tow Rating of 15 Tons. All Attachments Utilize One Adapter Which Fits into the Cast Steel Fork Receivers on All Miller Industry Heavy Duty Wreckers (20 Ton - 75 Ton). This Kit is Also Compatible with the Holmes DTU.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

The tunnel box mount is great for trucks with extra space inside of the tunnel box. This mount can be bolted or welded to the roof of the tunnel box and can be accessed from both sides.

• Works with both In The Ditch and Collins Dollies (does not work with the new longer version of Collins Dollies Axles)

Cleaning up debris comes with the territory in towing and recovery. Keep the items you need to tackle any mess organized and within easy reach on your wrecker or car carrier. This welded aluminum Garbage Can Holder from Zip's can mount to the interior of any toolbox so the receptacle is accessible when you need it. The rounded outside corner provides a contoured fit for cans with a bottom diameter of approximately 12" or less.

The Ultimate Recovery Kit For a Carrier or SP8000 From Zip's. This Kit Will Allow You To Maximize The Recovery Capability of Your Car Carrier or SP8000 SidePuller.

Keep loaded and empty gas cans from sliding around the bed of your truck or the deck of your light-duty wrecker with custom gas can mounts from Zip's. Made from welded aluminum, these sturdy mounts can hold a single two-gallon container and can be bolted directly to the truck body. Holes are pre-drilled on the feet to aid in installation. Plastic gas cans can be punctured if not secured properly. Avoid a potentially hazardous situation with these quality holders from Zip's.

Zip's built aluminum gas can bracket holds (2) 2.5 gallon gas cans (included) and bolts to the end of a toolbox on a car carrier.

Equip your next Holmes LSV, service or utility truck with this service rotation kit.

Zip's King Pin Adapter allows heavy-duty operators to recover and tow semi trailers equipped with an uncompromised king pin. Made from 1" plate steel, the adapter features a keyhole slot to fit over the king pin and then slide forward, nesting in the machined groove of the king pin . The adapter's front two holes accommodate 1" screwpin shackles, which provide connection points for Grade 80 recovery chain. Attached to fork adapters on the wrecker's underreach, the recovery chain keeps the adapter securely in place and supports the front of the trailer. This adapter allows for safe transport of semi trailers by a heavy-duty wrecker without requiring a second power unit. Purchase individually or as a kit with two screwpin shackles.

Keep your gas cans secure and within easy reach with this custom gas can mount from Zip's. The aluminum bracket is designed to bolt onto storage boxes on the underside of car carriers. The rectangular box holds two 2.5-gal. gas cans and includes holes for straps to run through the can handles. Gas cans, straps and mounting bolts not included.

This heavy duty wrecker lift fork kit includes 5 sets of frame forks for those unique vehicles requiring specialized lifting attachments. With the addition of this heavy duty lifting attachment kit there's nothing you won't be able to properly tow! From those pesky Gillis Buses to towing road tractors from the rear with the U-bolt attachments - this is the kit for you!

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Chevron 408 light duty wrecker.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Vulcan 892 light duty wrecker. These storage brackets include 2 pieces, enough to hold 2 dolly axles on your wrecker.

Helping others is the reason you started your business. When the call comes in for a customer who has run out of fuel, be prepared with a service vehicle that can bring several gallons at a moment s notice. Zip's has designed an aluminum gas can mount which can hold multiple containers and fits perfectly on the deck of your service vehicle, including the Holmes Tow Service Vehicles (TSV). With pre-drilled holes on the holder s feet, the rectangular mount takes just a few minutes to install.

This is a Zip's custom trash can bracket for a 6 gallon can, aluminum.

These are a Zip's Custom Pylon light bracket for a car carrier. Includes 2 lightboxes along with 2 lights. This is a weld-on bracket that gives your car carrier a custom appearance.

Zip's built aluminum gas can bracket with built-in shield that acts as a quarter fender. Holds (2) 2.5 gallon gas cans (included) and bolts to the rear of a toolbox on a car carrier.

This is a Zip's custom carrier gas can bracket, it mounts rear of toolbox.

Aluminum tread plate trim rock protection for 4024 tail board and rear of boom. Easy to install using 3M double sided tape.

Trash Can mount to hold (2) 10 gallon trash cans. Easily mounts to truck frame. 36" wide x 20" deep. Kit includes mount and (2) 10 gallon trash cans.

Maximize your storage space with this lifting fork storage carousel from AW Direct. This storage solution is ideal for storing most of your standard and specialty frame forks. With this system you can easily find and access just the right forks for the job at hand. The carousel is designed to be installed in the 30", 36" or 48" saddle tunnel boxes on a Century or Vulcan heavy duty wrecker or Rotator. This system can also be installed in a variety of other brands of tow truck storage compartments. Aluminum Construction. Paint is not included.

Note: Special Handling Fees Apply

Aluminum tread plate trim rock protection for 5130 tail board and rear of boom. Easy to install using 3M double sided tape.

• Aluminum Diamond Plate
• Cut to fit

Zip's Custom dolly tray for car carrier. This dolly tray is for 5.70 dollies. This custom dolly tray allows you to store your dollies out of the way while still being able to have easy access to the dollies.

The Ultimate Recovery Kit For a Carrier or SP8000 From Zip's. This Kit Will Allow You To Maximize The Recovery Capability of Your Car Carrier or SP8000 SidePuller.

This is a Zip's custom trash can bracket for a 4 gallon can, aluminum.