Bro Wreckers 5x5 Single Hole Heavy Duty Fork Reciever

Miller U-Bolt Lifting Attachment Set

This U-Bolt Lifting Attachment is designed for faster and easier rear hookups on many tractors. The attachment is centered on one of the rear U-bolts on each side and then the underlift is raised. The U-bolt attachment lifts on the bolt saddle while the U-bolt and nut guide it into position. These attachments are designed for Rear Lift Only. 1 Pair Included in Kit.

$565.99

Miller Crossbar Fork Adapter Offset Fork Holder

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

$752.99 – $1,157.99

Miller Short Axle Fork - 3" Wide Opening

This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.

$139.99 – $304.99

Miller Fork Spacer Set

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

$214.99

SafeAll Remote Brake Assist

Preserve your brakes, improve your stopping distance and maintain safety while towing heavy-duty trucks with the SafeAll Remote Brake Assist, formerly known as the Brake-Buddy. Secured inside the cab of the disabled vehicle, this supplemental brake actuator works in tandem with the tow truck and helps keep you in compliance with federal law.

$579.99

Miller Heavy Duty Fork Receivers T-Handle

Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.

$17.79

AW Direct Chain Fork

Easily recover heavy-duty trucks by turning your underlift stinger into a truck bar with this Chain Fork. Made from high-tensile steel and machined from a solid bar for extreme strength and durability. Grooved to accept 1/2" and 5/8" chains.

$279.99 – $521.99

Miller 5th Wheel Plate Attachment (Heavy Duty Wreckers)

This adapter requires

$703.99

AW Direct Quick Connect Air Coupler Kit

Utilize this professional tow coupler kit from AW Direct to quickly supply air to disabled trucks or buses in preparation for proper and safe towing. This 7-piece air coupler kit comes with 7 fittings which allows for applications on many different truck makes and models giving you the tools you need to get the job done efficiently. This kit also eliminates the need to seek out air supply tanks under the vehicle. It comes with a handy storage box along with a complete part listing for easy individual tool identification and replacement.

$179.99

Miller Short Tapered Axle Fork - 2" Wide Opening

These Axle Forks from Miller Industries have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles.

$164.99 – $328.99

Zip's Turbo Saver Exhaust Cover

Protect your equipment from wind and weather with the Turbo Saver. High speed winds can cause the turbo blades to spin and, due to a lack of lubrication, the bearings can be ruined. With the Turbo Saver the wind cannot turn the turbo. The Turbo Saver eliminates the need to use duct tape or rags in the exhaust pipe and is reusable. The Turbo Saver Exhaust Cover is great for transporting equipment.

$25.99 – $32.99

AW Direct Pro Star Fitting

This 90 degree elbow quick-connect fitting works well with the International Pro Star truck models. It connects to the air supply line on the driver side, inside of the frame rail.

$7.49

AW Direct U-Bolt Lifting Attachment

Every heavy-duty tow operator should own a pair of these U-Bolt Lifting Attachments from AW Direct. This high-carbon steel attachment is designed for faster and easier rear hook-ups on medium- and heavy-duty trucks. The beveled receiver acts as a funnel to guide the U-bolt and nut from the spring saddle onto the fork. The extra height of 5" extender allows you to stay clear of air brake and air suspension parts. The shaft is three inches tall and has a diameter of 2". The diameter of the beveled guide on the attachment is 1-7/8".

$135.99 – $254.99

Axle Caps 4-in-1 Axle Caps

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. 4-in-1 Axle Caps fit most 8-bolt tandem and large single axles - the most popular hub on the road.

$39.99

AW Direct Volvo and Mack Air Fitting

Essential to heavy-duty tow operations, this 1/4" brass air fitting allows tow operators to tie into the existing air system of a Class 8 Volvo or Mack commercial truck to supply air to the brake system when the power unit is disabled and can no longer perform this function. Using air supplied by the rear of the tow truck, this application allows the tow operator to release the casualty's brakes and prepare it for towing. Simply install directly to the metric threads on the air tank of a Volvo or Mack tractor.

$7.99

Truck and Trailer Wheel Pan

This Truck and Trailer Wheel Pan catches the oil that spills from the wheel hubs after the caps are removed. Fits 13-3/4" I.D. rims or larger. Side compartments hold lug nuts, preventing them from getting oily or lost. Sturdy polypropylene construction won't warp if oil is warm. Holds 88 oz.

$13.99

Miller U-Bolt Lifting Attachment Set

This U-Bolt Lifting Attachment is designed for faster and easier rear hookups on many tractors. The attachment is centered on one of the rear U-bolts on each side and then the underlift is raised. The U-bolt attachment lifts on the bolt saddle while the U-bolt and nut guide it into position. These attachments are designed for Rear Lift Only. 1 Pair Included in Kit.

$565.99

Miller Crossbar Fork Adapter Offset Fork Holder

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

$752.99 – $1,157.99

Miller Short Axle Fork - 3" Wide Opening

This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.

$139.99 – $304.99

Miller Fork Spacer Set

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

$214.99

SafeAll Remote Brake Assist

Preserve your brakes, improve your stopping distance and maintain safety while towing heavy-duty trucks with the SafeAll Remote Brake Assist, formerly known as the Brake-Buddy. Secured inside the cab of the disabled vehicle, this supplemental brake actuator works in tandem with the tow truck and helps keep you in compliance with federal law.

$579.99

Miller Heavy Duty Fork Receivers T-Handle

Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.

$17.79

AW Direct Chain Fork

Easily recover heavy-duty trucks by turning your underlift stinger into a truck bar with this Chain Fork. Made from high-tensile steel and machined from a solid bar for extreme strength and durability. Grooved to accept 1/2" and 5/8" chains.

$279.99 – $521.99

Miller 5th Wheel Plate Attachment (Heavy Duty Wreckers)

This adapter requires

$703.99

AW Direct Quick Connect Air Coupler Kit

Utilize this professional tow coupler kit from AW Direct to quickly supply air to disabled trucks or buses in preparation for proper and safe towing. This 7-piece air coupler kit comes with 7 fittings which allows for applications on many different truck makes and models giving you the tools you need to get the job done efficiently. This kit also eliminates the need to seek out air supply tanks under the vehicle. It comes with a handy storage box along with a complete part listing for easy individual tool identification and replacement.

$179.99

Miller Short Tapered Axle Fork - 2" Wide Opening

These Axle Forks from Miller Industries have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles.

$164.99 – $328.99

Zip's Turbo Saver Exhaust Cover

Protect your equipment from wind and weather with the Turbo Saver. High speed winds can cause the turbo blades to spin and, due to a lack of lubrication, the bearings can be ruined. With the Turbo Saver the wind cannot turn the turbo. The Turbo Saver eliminates the need to use duct tape or rags in the exhaust pipe and is reusable. The Turbo Saver Exhaust Cover is great for transporting equipment.

$25.99 – $32.99

AW Direct Pro Star Fitting

This 90 degree elbow quick-connect fitting works well with the International Pro Star truck models. It connects to the air supply line on the driver side, inside of the frame rail.

$7.49

AW Direct U-Bolt Lifting Attachment

Every heavy-duty tow operator should own a pair of these U-Bolt Lifting Attachments from AW Direct. This high-carbon steel attachment is designed for faster and easier rear hook-ups on medium- and heavy-duty trucks. The beveled receiver acts as a funnel to guide the U-bolt and nut from the spring saddle onto the fork. The extra height of 5" extender allows you to stay clear of air brake and air suspension parts. The shaft is three inches tall and has a diameter of 2". The diameter of the beveled guide on the attachment is 1-7/8".

$135.99 – $254.99

Axle Caps 4-in-1 Axle Caps

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. 4-in-1 Axle Caps fit most 8-bolt tandem and large single axles - the most popular hub on the road.

$39.99

AW Direct Volvo and Mack Air Fitting

Essential to heavy-duty tow operations, this 1/4" brass air fitting allows tow operators to tie into the existing air system of a Class 8 Volvo or Mack commercial truck to supply air to the brake system when the power unit is disabled and can no longer perform this function. Using air supplied by the rear of the tow truck, this application allows the tow operator to release the casualty's brakes and prepare it for towing. Simply install directly to the metric threads on the air tank of a Volvo or Mack tractor.

$7.99

Truck and Trailer Wheel Pan

This Truck and Trailer Wheel Pan catches the oil that spills from the wheel hubs after the caps are removed. Fits 13-3/4" I.D. rims or larger. Side compartments hold lug nuts, preventing them from getting oily or lost. Sturdy polypropylene construction won't warp if oil is warm. Holds 88 oz.

$13.99