Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Claw spring for Eagle wheel lifts. This spring is used to pull the claws
towards each other when the wheel lift is unloaded. Attaches to left & right
claws. See Brochures for schematics.
Towbar spring for Eagle wheel lifts. This spring is used to hold the towbar
straight when the wheel lift is unloaded. Attatches to the towbar and to the
inner stinger.
This Inflatable Air Wedge is specially designed to apply slow, damage-free
pressure to create the necessary gap for door tools. Internal stiffener keeps
the bag rigid, making it easy to slide over tight weather stripping. One-hand
push button release valve allows for easy operation.
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
This Boom Stinger Pivot Pin from Miller Industries is used in the recovery boom
and wheel lift boom assembly of Eagle EB-2 Modular Wreckers. The Pivot Pin
measures 9-1/2" long, and has a diameter of 1". Please see the brochure tab for
a breakdown.
ITI Yellow Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates willdrastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!
This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger
I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts
('01 and older). This kit includes one
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Design built after March 1996 up to August 2000. Includes (1) 12-0801073
Pivot Pin, (1) 12-0303403 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and
(2) 12-0701956 Pivot Pin Retaining Bolts.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Latest design built after August 2000. Includes (1) 12-0801073 Pivot Pin,
(1) 12-0306879 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2)
12-0701956 Pivot Pin Retaining Bolts.
These skates make loading and unloading disabled vehicles easier with a groove in the middle to accommodate brake rotors or vehicles without wheels. Interlocking plastic skates cause vehicles to glide towards the pull, with or without wheels, whether loading or unloading a carrier or removing a car from a tight parking space.
This Screw from Miller Industries is used in the wheel lift, under lift, and
boom assembly of Miller Car Carriers and Wreckers. This includes Century
Carriers and Wreckers, Challenger Wreckers, Eagle Wreckers, and Holmes
Wreckers. The screw measures 1/2" x 1" with a thread size of 13. Please see the
brochure tab for a list of breakdowns.
This Thrust Washer from Miller Industries is used in the boom, underlift, and
wheel lift assembly of Miller Wreckers. These wreckers include Century,
Challenger, Champion, Eagle, and Holmes Wreckers. The washer measures 5" in
diameter, 1" wide, and 1/16" thick. Please see the brochure tab for a list of
breakdowns.
This is a replacement crossbar pivot pin for light duty wreckers by Miller
Industries. This pin will fit the Eagle Model EB-3, EB2 Modular, the Champion
Model 101, the Holmes 440 Series/DFT 400, the Century Formula I 411 & 412,
Modular 400/600, and the Challenger 4700 Series wreckers. This pin allows the
crossbar on the wheel lift to pivot side to side.
* 3in Diameter 3-7/8in Length