0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Hella Side LED Marker Light
These LED Side Marker Lights from Hella are available in either amber or red.
They are commonly used on Modular Wreckers from Century and Vulcan. See the
features below for a list of wreckers and see the brochure tab for breakdowns.
$55.99
Buyers Circuit Breakers Hi-Amp
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
$25.79
–
$41.29
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Buyers LED Strip Lighting
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
$16.89
–
$64.99
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
GoJak Dollies
GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design
eliminates the need for electric power, compressed air, or slow hydraulics.
$297.99
–
$317.99
Maxxima 3/4" Stainless Grommet Cover
Stainless Steel Grommet cover for M09300 Clearance Marker Series, by Maxxima.
$1.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
Whelen Male WeatherProof Deutsch 3 Pin Connector Kit
This Deutsch male connector provides a waterproof connection when used with
the W442D female connector. These connectors are commonly used with the Whelen
strobe systems.
$11.69
Whelen Female Weatherproof Deutsch 3 Pin Connector Kit
This Deutsch female connector provides a waterproof connection when used with
the W441D male connector. These connectors are commonly used with the Whelen
strobe systems.
$11.69
7 Wire Cable 14Ga
Premium quality trailer wire cable manufactured to meet or exceed ATA & SAE
specifications. Neoprene insulation resists all weather and protects the
individual color coded, annealed copper conductor strands.
$3.99
Del City Rubber Grommets 1-1/4" ID, 1/4" Groove Width, 1-3/4" OD
Rubber grommets help eliminate risk of wire, cord or hose chaffing on
applications due to metal drill holes or cutouts. Each rubber grommet is
flexible and allows for simple installation by easily snapping the rubber
grommet directly into the drill hole. Effective and easy to use rubber grommets
ensure your wiring projects and applications are protected and last longer.
$1.29
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Related products
Miller Delta Ring Small Wreckers
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
$108.99
Miller Mounting Pin Miller Small Wrecker Delta Rings
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
$21.99
Miller Boom End Assembly Century / Challenger / Holmes
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
$419.99
Miller Sheave Housing Assembly Century / Holmes / Vulcan
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
$373.99
Miller Boom End Sheave Shaft Century / Challenger / Holmes
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
$59.99
Miller Boom Sheave Yoke Century Midnight Express and Holmes 440 HP
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
$227.99
Miller Boom Sheave Yoke Shaft Century Midnight Express and Holmes 440 HP
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
$35.45
Zip's Boom Wing Cable Guides, 27" and 32"
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
$40.00
In The Ditch Removable Wire Rope Guide Cover
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
$38.99
In The Ditch Boom Head
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
$406.99
Miller Boom End Cable Guide Century / Challenger / Holmes
This is the boom end cable guide for many light duty wreckers by Miller
Industries. This cable guide replaces part number 12-0800735. See Brochures for
a reference chart and Features for related parts and wrecker models this cable
guide will fit.
$29.39
Miller Sheave, 8" x 1-1/2"
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
$179.99
Miller Cable Follower w/ 1" Hole Chevron 410 and LMD 510 / 512
Chevron replacement cable follower with a 1" hole for the Chevron 410 and LMD
510/512 wreckers.
$211.99
Miller Cable Tie Back Spring Chevron 408 / 410
Chevron cable tie back spring for Chevron 408/410 wreckers.
$81.99
Miller Sheave, 1-3/16" Bore, Century Midnight Express and Holmes 440 and 480
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
$49.24
Miller Boom End Sheave 6" Century / Challenger / Champion / Holmes
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
$113.99
Miller Delta Ring Small Wreckers
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
$108.99
Miller Mounting Pin Miller Small Wrecker Delta Rings
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
$21.99
Miller Boom End Assembly Century / Challenger / Holmes
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
$419.99
Miller Sheave Housing Assembly Century / Holmes / Vulcan
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
$373.99
Miller Boom End Sheave Shaft Century / Challenger / Holmes
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
$59.99
Miller Boom Sheave Yoke Century Midnight Express and Holmes 440 HP
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
$227.99
Miller Boom Sheave Yoke Shaft Century Midnight Express and Holmes 440 HP
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
$35.45
Zip's Boom Wing Cable Guides, 27" and 32"
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
$40.00
In The Ditch Removable Wire Rope Guide Cover
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
$38.99
In The Ditch Boom Head
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
$406.99
Miller Boom End Cable Guide Century / Challenger / Holmes
This is the boom end cable guide for many light duty wreckers by Miller
Industries. This cable guide replaces part number 12-0800735. See Brochures for
a reference chart and Features for related parts and wrecker models this cable
guide will fit.
$29.39
Miller Sheave, 8" x 1-1/2"
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
$179.99
Miller Cable Follower w/ 1" Hole Chevron 410 and LMD 510 / 512
Chevron replacement cable follower with a 1" hole for the Chevron 410 and LMD
510/512 wreckers.
$211.99
Miller Cable Tie Back Spring Chevron 408 / 410
Chevron cable tie back spring for Chevron 408/410 wreckers.
$81.99
Miller Sheave, 1-3/16" Bore, Century Midnight Express and Holmes 440 and 480
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
$49.24
Miller Boom End Sheave 6" Century / Challenger / Champion / Holmes
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
$113.99
