Search

Note: Special Handling Fees Apply

This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.

<pre/>Fits:

Vulcan 880 / 890 (03/2008 - Current)

Vulcan Modular 880 / 890 (06/1999 - Current)

</pre/>

Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.

Chevron cable tie back spring for Chevron 408/410 wreckers.

Chevron replacement cable follower with a 1" hole for the Chevron 410 and LMD 510/512 wreckers.

These handy shelves are not only designed to make any shop or garage more organized they just look good to. These shelves are available in 3 different widths and 5 different depths. These shelves can be mounted with a gusset down offering a smooth sleek top surface or you can turn them over for a shelf that has a lip around the top. To make your life easier we include hardware so you can mount this holder to just about anything you want. We also include special peg board screws so you can screw the holder directly to peg boards. The special screws are slightly larger than the peg board hole and work great. They can also be removed and reused so you can move or add racks without destroying your peg board. Each mount is made from Aircraft grad aluminum and come with a 100 lbs. structural load rating. Remember though, it's up to you to make sure you mount them to a surface that can support the load you put on the shelf.

This is a 12 ton block with an 8 sheive from Miller Industries.

Snatch blocks are the ultimate winch accessory. They can be used in recovery situations to help double the pulling power of the winch, achieve a better pull angle and reduce strain on the cable.

Heavy duty cart with 3 shelves, 2 large rear wheels, and a large handle that is precision designed to assist you in transporting your Associated Equipment chargers and load testers around the shop or home garage.

This Miller Industries shelf kit includes 3 adjustable shelves.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 9", and 12" heights. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 12", and 18" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 16" width and are available in 6", 9", and 12" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board.

These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.

Sometimes smaller is better, especially for home use. The Xtend+Climb Ultralight FT1 Step Stool is designed for homeowners that only need a single step to get to those hard to reach shelves, pictures or corners around the house. Both lightweight and durable, it s a versatile step stool that is so handy that it eventually finds it s way into every room of the home.

The Tiger Tool slack adjuster service kit includes specific-use slack adjuster pullers custom designed to fit all major brands of Manual and Automatic Self-Adjusting type slack adjusters. The kit also includes two brake clevis pin presses for quick removal of the clevis pins as the cotter pins are sheared off in the process.

Making sure your bolts stay on tight is important, and a great way to do that is to see when they're coming loose. The HexChex Multi-Size Loose Wheel Nut Indicator from Ken-Tool does exactly that. By sliding them over the lug nuts and tightening them, the arrow indicator can let you know when the lug nut has become loosened. This process doesn’t take any tools to install. Plus, the seven different HexChex sizes are able to fit 31 different nut sizes.

In The Ditch Pro Series Toolboxes are now available with the Power Lock Remote Control Locking Option. When it comes to making your living with your truck insist on the best, insist on In The Ditch on your next truck. With the introduction of our Power Lock option for our Pro Series Toolboxes you can now easily lock or unlock your toolboxes with just a single push of the wireless remote control. No need to waste time walking around and locking each box, no more struggling to see the lock at night, no more dealing with frozen locks, just push the button it’s that simple. The Power Lock option can also be wired into your truck’s electric door locks, so you can auto lock and auto unlock your Pro Series™ boxes when you unlock truck doors. When you unlock the toolboxes, you can also wire them, so the toolbox lights come on. In the Ditch has been working diligently on ways to make the professional towing operators’ life easier. As a professional tow truck operator your time is valuable and so is your equipment. Don’t take chances with either and insist that your truck gets equipped with In The Ditch Pro Series Tool Boxes with the Power Lock option.

Keep your paper towels and cleaning supplies at the ready in your garage and trailer with our Paper Towel Holder with Shelf. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. This shop towel rack includes a hold-down flap that keeps your towels from unspooling in the breeze and perfectly positioned to pull the next sheet while the integrated shelf keeps your cleaning supplies and shop gear organized. Our paper towel rack with shelf works great on any flat surface including drywall, wood, metal, and pegboard using our optional hardware.

Our Aluminum Wall Hooks are a versatile and easy option to organize your truck, shop, garage, or trailer. We offer hooks in 3", 5", and 7" lengths. The heavy-duty aluminum alloy construction gives these hooks a structural rating of 100lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surfaces. Load rating may be limited by the mounting surface.

Ancra s Toss N Tie Strap not only simplifies the cargo securement process, but it also greatly reduces potential damage and/or injury that could happen by throwing a heavy-duty tie-down hook over the entire load. The Toss N Tie Strap features a carabiner and ring that attach to the end of the tie-down to make it easier to throw it over.