Wheel Lift L-Arms, Outer Crosstubes & Hardware

Towbar spring for Eagle wheel lifts. This spring is used to hold the towbar straight when the wheel lift is unloaded. Attatches to the towbar and to the inner stinger.

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Thumbscrew to Hold Wheel Grid On
• Cam Lock to Lod L-Arm In
• 2 Hooks for Ratchet & Strap Style Hold-Down (for Safety Chains)
• Shop for the right hand version of this Outer Cross Tube, <a href="https://zips.com/parts-detail/miller-3-receiver-century-10s-std-rh-12-090 5095" target="_blank"/>12-0905095</a/>
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

Note: Special Handling Fees Apply

Wheel Grid assembly, right hand, fits Vulcan 850 & 890 wheel lifts. Uses <a href="http://zips.com/parts-detail/miller-l-arm-wheel-retainer-vulcan-850- 8501000"target="_blank"/>8501000</a/> l-arm. This part can be used to replace Part Number, 8500500.

• Fits on 4" x 4" square tube
• Vulcan patented strapless system
• 6,000lbs lift rating

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Century car carriers and Century, Challenger and Holmes wreckers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides fits 3 x 3 cross tubes and can be used on the driver or passenger side. This part can be used to replace Part Number 12-0800841.

Note: Due to size of product, additional handling charges may apply.

Miller Crossbar, Century Formula wheel lift and Century & Champion carrier wheel lifts, uses WL-300K2 pivot pin kit. Fits 1996 and older Century wreckers and 2002 and older Century and Champion Car Carriers. Use 12-0803238 for newer models.

This is a hydraulic hose tensioner spring for a Vulcan 810, Century 300 Series, and Holmes 440 Series by Miller Industries. See Brochures for a reference chart and Features for related parts.

This left hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.

This right hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.

Note: Special Handling Fees Apply

<span style="color: red;"/><span style="color: red;"/>Note: Special Handling Fees Apply

</span/>

</span/>

Wheel Grid assembly, left hand, fits Vulcan 850 & 890 wheel lifts. Uses <a href="http://zips.com/parts-detail/miller-l-arm-wheel-retainer-vulcan-850- 8501000" target="_blank"/>8501000</a/> L-arm. This part can be used to replace Part Number, 8500400.

• Fits on 4" x 4" square tube
• Vulcan patented strapless system
• 6,000lbs lift rating

Note: Special Handling Fees Apply

This is a 3.5" square crossbar by Miller Industries designed for Vulcan 804, 806, 860, 870, and 880 series wheel lifts and Vulcan car carrier wheel lifts. It uses <a href="http://zips.com/parts-detail/pivot-pin-kit-vulcan-century- %2701-%2705-vul-880k1" target="_blank"/>VUL-880K1</a/> pivot pin kit. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 8700150.

• 3 1/2" x 3 1/2" square tube
• Accepts <a href="http://zips.com/parts-detail/miller-wheel-grid-3-5-vulcan- 800-seri-8800800" target="_blank"/>8800800</a/> & <a href="http://zips.com/parts- detail/miller-wheel-grid-3-5-vulcan-800-seri-8800900" target="_blank"/>8800900</a/> outer crosstubes
• Uses <a href="http://zips.com/parts-detail/detent-kit-century-vulcan-vul-dk1" _target="_blank"/>VUL-DK1</a/> detent ball kit
• Vulcan 804, 806, and 880/890 Series
  
  Related Parts:
• Pivot Pin Kit <a href="http://zips.com/parts-detail/pivot-pin-kit-vulcan-or- century-%2705-n-vul-880k2"/>VUL-880K2</a/>
• Crosstubes (CROSSTUBES3.5)

Note: Special Handling Fees Apply

This 3.5" Crossbar from Miller Industries is used in the wheel lift and slide-in tire restraint assembly of Century, Century LCG, Champion, and Vulcan Car Carriers. The crossbar uses a 3.5" x 3.5" square tube and has a built in trailer ball plate. Please see the brochure tab for a list of breakdowns.

<pre/>Fits:

2005-Current Century 10 Series Steel & Aluminum Carriers

2005-Current Century 15 Series Steel & Aluminum Carriers

2009-2014 Century LCG 16 Series Steel & Aluminum Carriers

2005-Current Champion Steel & Aluminum 19'-21' Carriers

2005-Current Vulcan 10 Series Steel & Aluminum Carriers

2005-Current Vulcan 10 Series Extreme Angle Steel Carriers

</pre/>

This Stop Pad from Miller Industries is used in the boom assembly of Century, and Challenger Wreckers. It is also used in the wheel lift assembly of Vulcan 810 Intruder Wreckers. The pad measures 3-3/4" in diameter, 1" tall, and 1/8" thick. Please see the brochure tab for a list of breakdowns.

Note: Special Handling Fees Apply

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete right hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts <a href="http://zips.com/parts-detail/restrain-tire-right-hand-decal-12-0904157" target="_blank"/>Right Hand Tire Restraint L-Arm, 12-0904156</a/>. Also, shop for the left hand version of this Outer Crosstube, <a href=" http://zips.com/parts-detail/miller-3-5-receiver-centurty-10s-pivot-12-0909499l" target="_blank"/>12-0909499L, by clicking here</a/>. Please see the brochure tab for a list of assemblies and breakdowns.

• New style Century "Pivot-L" with line-up pin
• Get the left hand version of this Outer Crosstube, <a href="http://zips.com/parts-detail/miller-3-5-receiver-centurty-10s-pivot-12-0909499l" target="_blank"/>12-0909499R, by clicking here</a/>
  
  Fits
  
  
• 2005-Current Century 10 Series Steel & Aluminum Carriers
• 2009-Current Century LCG 12 Series Steel and Aluminum Carriers
• 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 12 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 16 Series Steel & Aluminum Carriers

Note: Due to size of product, additional handling charges may apply.

Blade rails used on front of 19.5' & 21.5' by MIller Industries.

This is a crossbar for the Vulcan 807 Intruder, Century 300 Series, & Holmes 440SL by Miller Industries. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 12-0803917.

This is a blade rail used in mids of 21' - 22' by Miller Industries.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete left hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts

This is a 2 Groove small sheave for the hydraulic hoses on the outer stinger weldment for a Vulcan 807/810, Century 300 Series, and Holmes 440SL by Miller Industries. See brochures for reference chart and see Features for related parts.

Note: Special Handling Fees Apply

Note: Truck Freight Ship Direct Only

• Used in the middle of 21' - 22' beds

Note: Special Handling Fees Apply

This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.

• 3" x 3" square tube
• Used on Formula I wheel lifts after March 1996
• Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
• Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
• Uses WL-300DK1 detent ball kit
• Length: 53"
• Width: 4"
• H eight: 9.25"

Note: Special Handling Fees Apply

This crossbar from Miller Industries can be used on Chevron Series 16, Series 20, Series 14, and Series 10 Carriers, as well as Chevron 408V/408T Renegade, 408, 408A, 410, 410A, and 512 Wreckers. It can also be used on Century LCG Generation II 16 Series Steel and Aluminum Carriers made from 2014 until now.

• 2" Center Pin (Not Included)
• Used with Century and Chevron Wheel Lifts
• Length: 56.2"
• Width: 3.5"
• Height: 9"
  
  Fits:
  
  
• Chevron 10, 14, 16, and 20 Series Carriers
• Chevron 408V/408T Renegade Wreckers
• Chevron 408, 408A, 410, 410A, and 512 Series Wreckers
• 2014-Current Century LCG Generation II 16 Series Steel & Aluminum Carriers