Wheel Lift L-Arms, Outer Crosstubes & Hardware

This painted steel L-Arm bracket from Miller Industries is a replacement weldment for the wheel lift on Vulcan 896, 897 and V30 light- and medium-duty wreckers. This receiver mounts to the passenger side wheel grid and secure the L-Arm, otherwise known as a scoop, wheel retainer or tire restraint.

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Note: Special Handling Fees Apply

Also know as: wheel grid, slide bar, or Outer Crosstube, this outer crosstube assembly, right hand, fits Century Formula I, Holmes DFT-400. Accepts part# 12-0903479 standard 3500lbs l-arm. This part can be used to replace Part Number 12-0800913.

• Fits 3" x 3" square tube
• Century standard slide in L-arm style
• Fits Century Formula I
• Fits Holmes DFT-400
• Fits Century/Champion 10 Series Carriers

Option of driver or passenger side pivot-style l-arm receiver bracket from Miller Industries attackes to the outer crosstubes on Vulcan 870 Series light-duty wrecker wheel lift assebmlies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

This is a wheel spacer weldment for the L-Arm on the wheel lift of a Holmes 440SL or Vulcan 807 by Miller Industries. This spacer can also be called a tire adapter. This spacer slides onto the end of each L-Arm. It is used when the vehicle you have to tow has low tire pressure or even no tire. This spacer will take up some of the room where the tire would normally rest allowing for a secure hook-up and tow. To view related parts see Features below. To view part schematics click on the Brochures tab.

This is the boom pivot pin for a Vulcan 880/890 Series by Miller Industries. See Brochures for a reference chart and features for related parts.

Note: Special Handling Fees Apply

Crossbar, Vulcan 850 and 890 series wheel lifts, uses the <a href="http://zips. com/parts-detail/vulcan-crossbar-pivot-pin-kit-890-85-vul-890k1" target="_blank"/> VUL-890K1</a/> pivot pin kit. This part can be used to replace Part Number 850020300.

• 4 X 4  square tube
• Accepts <a href="http://zips.com/parts-detail/miller-wheel-grid-assembly- left-vulcan-8900400" target="_blank"/>8900400</a/> & <a href="http://zips.com/ parts-detail/miller-wheel-grid-assembly-right-vulca-8900500" target="_blank"/> 8900500</a/> outer crosstubes
• Uses <a href="http://zips.com/parts-detail/detent-kit-century-vulcan-vul-dk1" target="_blank"/>VUL-DK1</a/> detent ball kit
• Length: 64"
• Width: 4"
• Height: 8.5"

This is a 3" right hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

Also known as: wheel grid, slide bar, or Outer Crosstube, this left outer crosstube assembly will fit a 3" x 3" square crosstube. It has a cam lock to hold the wheel grid onto the crossbar, a black knob plunger pin to hold the L-Arm in, and 4 hooks for a basket strap style hold down. This crosstube fits the following wrecker models: Century Formula I & Holmes DFT-400. It also will fit Century & Champion 10 Series Carriers. It accepts part number 12-0903479 standard 3,500 lbs. L-Arm. This part can be used to replace Part Number 12-0800912.

This is a Miller Industries Crossbar for Century, Challenger, and Holmes model wreckers. This is the new 5" x 5" Fabricated Crossbar that is used on heavy duty wreckers with underlifts. This part can be used to replace Part Number 12-0802914.

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.

• New style Century "Pivot-L" with line-up pin
• Get a left hand version of this receiver, 12-0904152, by clicking here
• Accepts a Right Hand L-Arm Tire Restraint 12-0904157
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

This passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 and 890 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin but does not include the stop pin.

This is the upper parallel arm of a formula I Wheel Lift mounted to a wrecker by Miller Industries. This part can be used to replace Part Numbers: 12-0801157, 12-0900883, and 12-0800627.

This Inner Crosstube Weldment from Miller Industries uses a 3" x 3" square tube and has a built in trailer ball plate. It is used in the wheel lift and slide-in tire restraint assembly on Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the brochure tab for a list of breakdowns.

This zinc-plated mild steel L-Arm from Miller Industries fits the driver side of the wheel lift on Vulcan 896 and 897 medium-duty wreckers. Otherwise known as a tire restraint or wheel retainer, the 2" x 3" rectangular tube fits the 12-4008001 outer crosstubes and offers adjustment holes and a grated tire scoop pan for tire securement.

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint <a href="http://zips.com/parts-detail/restrain-tire-left-hand-decal-12-0904156" target="_blank"/>12-0904156</a/>. To shop for the right hand version of this receiver, <a href="http://zips.com/parts-detail/miller-3-receiver-century-holmes-pivo-12-0904153" target="_blank"/>12-0904153, click here</a/>. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.

• New style Century "Pivot-L" with line-up pin
• Get a right hand version of this receiver, <a href="http://zips.com/parts-detail/miller-3-receiver-century-holmes-pivo-12-0904153" target="_blank"/>12-0904153, by clicking here</a/>
• Accepts a Left Hand L-Arm Tire Restraint <a href="http://zips.com/parts-detail/restrain-tire-left-hand-decal-12-0904156" target="_blank"/>12-0904156</a/>
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

Note: Special Handling Fees Apply

Outer Crosstube assembly, left hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Accepts 12-0904156 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902790.

• Fits 3 1/2" x 3 1/2" square tube
• Century new style "Pivot-L" with line-up pin
• Uses 12-0902382 basket strap
• Can also be used on Century/Champion 20 series car carriers

Vulcan replacement left hand scoop bracket weldment.

This pivot-style L-Arm from Miller Industries fits Formula 6500 wheel lifts on Century wreckers. Also known as a tire restraint or wheel retainer, option of driver or passenger side L-Arm fits 2 x 3 outer crosstubes (Part Nos. 12-0904158 and 12-0904189). This zinc-plated L-Arm also features an alignment hole on the underside and includes a ratchet tie-down strap.

Note: Special Handling Fees Apply

This Outer Right Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a <a href="http://zips.com/parts-detail/miller-3-l-arm-cent-holmes-challenger-12-0802606" target="_blank"/>6,000 lb. Slide-In L-Arm, 12-0802606</a/>. You can also get a <a href="http://zips.com/parts-detail/left-outer-slide-in-crosstube-12-0904690" target="_blank"/>Left Hand Outer Slide-In Crosstube, 12-0904691, by clicking here</a/>.

• 31-1/2"
• Fits 3-1/2" x 3-1/2" square tube
• Century 6,000 lb. Slide-In L-Arm Style

This is a 3" left hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

This is the 1/8" thick boom pivot pin shim for a Vulcan Modular 880/890 Series by Miller Industries. See Brochures for a reference chart and features for related parts.

This driver side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 and 890 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin but does not include the stop pin.

This 2" x 2" L-Arm Storage Tube from Miller Industries is used on the assembly of Century 10, 15 and 20 Series car carriers. Also for tire restraints and wheel retainers, this bracket can be used on the assembly of newer Champion carriers as well. The tube comes with a camlock built into the back side of it. This part can be used to replace Part Number 12-0802663.

This is the 5/64" thick boom pivot pin shim for a Vulcan 880/890 Series by Miller Industries. See Brochures for a reference chart and features for related parts.