Wheel Lift L-Arms, Outer Crosstubes & Hardware

This is a crossbar for a Challenger I-500 Invader series wheel lift. It uses the <a href="http://zips.com/parts-detail/challenger-i- 500-wheel-lift-pivot- pin-ki-i-500k2"TARGET="_BLANK"I-500K2</a pivot pin kit. This is a 2" x 3" square tube crossbar.

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 1 wheel lift. This kit fits 3 square crossbars and includes painted black steel crosstubes and alloy scoop L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this aluminum L-Arm offers a 4,000-lb. weight rating as a pair.

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Right Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a right hand

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

This is the stinger tilt column weldment for a Vulcan 880/890 Wheel Lift by Miller Industries. See features for related hardware and see brochures for a reference chart.

This is the boom pivot pin for a Century Formula I 411/412 by Miller Industries. See Brochures for a reference chart and features for related parts.

This is a pulley for the hydraulic hose assembly on the bottom of the outer boom of a Modular Midnight Express by Miller Industries. See Brochures for a reference chart and Features for related parts.

Outer Crosstube assembly, right hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

This 3.5" Outer Cross Tube Assembly from Miller Industries is a complete Left Hand Assembly. It is used on the wheel lift assembly of Century 20 Series Steel and Aluminum Car Carriers that were made in 2006 to current. The cross tube is 31.5" long and it is rated at 6,000 lbs. The 3 and 4 Car Carriers use a different part number,

This 3.5" Outer Cross Tube Assembly from Miller Industries is a complete Right Hand Assembly. It is used on the wheel lift assembly of Century 20 Series Steel and Aluminum Car Carriers that were made in 2006 to current. The cross tube is 31.5" long and it is rated a t 6,000 lbs. The 3 and 4 Car Carriers use a different part number,

This Outer Left Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a

This 3.5" x 3.5" square tube Crossbar from Miller Industries is used in the wheel lift assembly of Century 20 Series Car Carriers. I t can also be used on Century Formula 6000 and Formula II Wheel Lifts with one piece pivot pins. See the brochure tab for a list of breakdowns.

This pivote-style L-Arm kit from Miller Industustries features a pair of aluminum scoop L-Arms. Each L-Arm fits the Formula 6500 wheel lift assembly on Century 400/600 Series light-duty wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm will fit standard 4,000-lb. capacity crosstubes.

This is a crossbar for the Century 211 by Miller Industries. See Features for related parts and brochures for reference chart.

This Inner Boom Weldment from Miller Industries is used on the Century LCG 16 Series wheel lift and slide-in tire restraint assembly. These 16 Series LCG models are made from 2009 through 2014.

This is a retaining angle for hydraulic hoses at the bottom of the main boom of the Vulcan 810 and Holmes 440SL by Miller Industries.

Outer Crosstube assembly, left hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 6500 wheel lift. This kit fits 3-1/2 square crossbars and includes black painted steel crosstubes and alloy L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this L-Arm with a scoop-style tire pan offers a 4,000-lb. weight rating as a pair. This assembly can be upfitted to a 6,000-lb. rating with the 12-0904186 & 12-0904187 steel L-arms.

This is a complete crossbar assembly less the wheel retainers by Miller Industries for the Vulcan 880/890 Series.

Note: Due to size of product, additional handling charges may apply.

This is the trunnion pivot weldment for the main boom. This pivot weldment will fit the Century 300 Series by Miller Industries and also the Challenger 4300 Express Series. See Brochures for a reference chart.

This is a pulley for the hydraulic hose assembly on the bottom of the outer boom of a Modular Midnight Express by Miller Industries. See Brochures for a reference chart and Features for related parts.

Miller Industries light duty wrecker wheel lift crossbar. This 3" x 3" crossbar is commonly used on Century Modular 400/600 & 411/412 wreckers.

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Left Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a left hand