Car Carrier Parts

12s/16s Steel Beds I Beam Wear Pad

This Miller Industries product is a full assembly of the right hand side of a tail light section on a car carrier. It is designed for Century or Vulcan LCG Series (1st Generation 2013 and older). It includes all the neccessary parts to replace the entire tail light section. This product bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

This is a Miller Industries control box hood assembly with a black finish. It includes both the driver and passenger side hoods as well as the channel box connecting the two. It is designed for all Century/Vulcan Car Carriers 2005 & newer (Excluding LCG). See Features for part numbers this assembly includes.

This Wheel Lift Cylinder from Miller Industries is used on the assembly of several Century Car Carriers. These include 15, and 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Hose Tensioner Pulley Spring from Miller Industries is used on a Century 1040S and SDU underlift. The spring is 23" long and has a width of 1".

Outer Crosstube assembly, right hand, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Uses 12-0903479 standard 3500lbs L-Arm.

This is a replacement fluid tube for a 10 Series Car Carrier by Miller Industries. This tube connects the winch motor to the underbody line beneath the bed of the car carrier.

This hydraulic wheel lift tilt cylinder is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Standard cylinder color is black.

Zip's built aluminum tube pylon. This pylon measures 2"X 2"X 23". This pylon mounts between the cab and tunnel box of your wrecker.

Outer Crosstube assembly, left hand, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Uses 12-0903478 standard 3500lbs l-arm.

44.25" passenger side control rod for HD Jerr Dan rollback.

This is the boom pivot pin wedment for a Vulcan 880/890 Wrecker by Miller Industries.

This is a hose protector plate for a Holmes 440SL by Miller Industries. See Brochures for a reference chart.

Otherwise known as a tire restraint and wheel retainer, this L-Arm from Miller Industries fits the wheel lift and Backsaver assembly on several Chevron car carriers and wreckers.

This Plug from Miller Industries is used on 4-Ton Hydraulic Winches,

This Decal from Miller Industries is used to label the winch cable out and in controls, as well as the left and right stiff leg up and down controls. It measures 10" long and 4.5" wide.

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter.

This Right Hand Worm from Ramsey Winch has a gear ratio of 46:1. It is used in the assembly of 4-Ton Hydraulic Winch,

This Miller Industries product is a left side tail light assembly for car carriers.

This is a Miller Industries 1 spool valve body. It is most commonly used on carriers to control an autoload wheel lift.