Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Car carriers and rollbacks do not make any money when their sidelined with a breakdown. Get your equipment back to work again with quality replacement parts from Zip’s AW Direct. We stock cylinders, winch drums, control assemblies and other essential hardware to facilitate your repair. We also have the necessary lighting, wiring and brackets to make sure you’re seen when you’re back out on a job.
This 1/2"-13 x 2" long Carriage Bolt from Miller Industries is used on the Bed Lock Assembly of Century 10 Series Carriers made prior to 2001, and Century 20 Series Carriers made from 2002-2006. See the features below, and the brochure tab for a list of breakdowns. This part can be used to replace Part Number 12-0400210.
This detent kit from Zip's will help hold the crossbar straight when it is not loaded. The kit is for Century Formula 6000 and Century 20 Series Car Carrier Wheel Lifts that were made in 2006 or older. The kit includes a ball, pin, and spacer.
This Bed Pivot Pin from Miller Industries us used on the bed of car carriers. It measures 38" long and has a diameter of 1-1/2". This Pin is use in the tilt frame assembly of Century and Vulcan 15 Series Car Carriers. Please see the brochure tab for a list of breakdowns.
Wheel Lift Rebuild Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts built before March 1996. Kit includes WL-300K2, WL-300CPK1, WL-300PK2, and WL-300DK1 kits.
This Mounting Channel U Bracket from Miller Industries is used on the Winch Clutch Control assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the features below for a list of carriers that this bracket fits, and see the brochure tab for breakdowns.
This is a hydraulic hose track cover plate on the outer boom of a Modular Midnight Express by Miller Industries. See Brochures for a reference chart and Features for related parts.
Vulcan 819 and 821 Series Car Carrier Bed Extend Cylinder Seal Kit for cylinder #814010900. Fits only Pre 1998 Production carrier with serial numbers beginning in 5 or 8. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.
This is a Miller Industries 67.5" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers before 2000. It houses all the hoses / electronics for a 5-spool system and is a galvanized finish. This control channel box comes in 2 different lengths, 67.5"(12-0801559) and 74"(12-0720437). In order to be accurate with you part selection you should measure the length your old one to see if it matches up correctly with this 67.5" control channel box.
This is a Pivot Pin Kit for a Century Midnight Express 300 Series by Miller Industries. This kit will provide you with everything you need to replace your old worn out pivot pin on your wrecker's wheel lift.
Cylinder Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. This kit includes all of the pins that hold the tilt cylinders, the lift cylinders, and the upper arms, the hardware to hold the hold pins, new bushings for the tilt cylinders pins, new bushings for the upper arm pins, and grease fittings.
This is a hydraulic hose tensioner spring for a Midnight Express by Miller Industries. See Brochures for a reference chart and Features for related parts.
Otherwise known as a tire restraint and wheel retainer, this 2 square L-arm fits the wheel lift on Holmes DFT-100 Series wreckers. This steel painted L-Arm can be used on the driver or passenger side and fits the following outer crosstubes: GX-363 and GX-364.
Option of driver or passenger side pivot-style l-arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.