Medium / Heavy Wrecker Parts

Safety Chain Roller Kit for All Large Miller Wrecker Bodies Excluding Rotators.

This LED Side Lamp from Miller Industries can be used in place of the docking light 124002717 for wheel area and side applications. The side lamp is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light.

This low pull D-Ring Kit is for a Diagonal Rear Jack-Leg for all Century Heavy Duties. D-Ring Kit includes two d-rings.

This Left Side Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of several Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

Innovative Lighting's stainless steel 50 watt, 12 volt, lights. They are commonly used as docking/hull lights for watercraft. This part can be used to replace Part Number 124002261.

This Outrigger Blade from Miller Industries is a Wheel Lift Attachments. It is used on the assembly of Century, Challenger and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load and the Century Modular Midnight Express light duty wreckers by Miller Industries. To view part schematics please click on the brochure tab above. This part can be used to replace part number 12-0306776.

This is a color control handle kit by Miller Industries. This kit includes enough colored handles to do both sides of a large unit from a 4024 through a 6-winch rotator.

This is Jack Up and Down Control Knob from Miller Industries. It is used on Control Assemblies of many Miller Wreckers that use a Jack control. These wreckers include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 96" long. Please see Features for what models this control cable will fit.

This is a Boom Lock Kit for a Holmes 600 & 750 Wrecker. This Pin is used to hold the 2 booms together. You can pull this pin to unlock the 2 booms and rotate the booms to the side if you have a side pull situation. This kit includes a plunger pin, spring, and pull grip handle assembly.

43" Extreme 3" Aluminum Aero Dynamic Pylon. Does Not Include Wrapper or Whelen H700 LED Side Lights.

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

"LED" represents the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Vulcan 896 and 897 medium-duty wreckers. Also known as a tire restraint or wheel retainer, this adjustable 2" x 3" L-Arm fits the outer crosstube (Part No. 12-4008002). This adjustable L-Arm offers a capacity of 6,000 lbs. as a pair and is angled in and down more for clearance on smaller vehicles.

Boom End Sheave for Holmes 600 & 500 Boom Ends. 6" sheave with 1 3/16" diameter pin size.

Zip's Custom Hydraulic Rear Stiff Leg Kit. Designed for add-on installation on 12 ton or smaller light wreckers. Will fit on either conventional or self-loading small wreckers. Zip's custom legs features a compact design with an extra wide flipper foot. The kit includes hydraulic legs, flipper foot, built in tie-back anchor, low pull D-ring, electric control valve, wired lanyard controller. *Mid-Leg D-ring is available but NOT included in kit.

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

Innovative Lighting's 50 watt, 12 volt replacement bulb. Commonly used as a 580 series docking/hull light for watercraft.

Replacement Blade, wheel lift spade and stiff leg. 16" long with 4 mounting holes.

Miller Industries Mounting Pin for the Heavy Duty D-Ring (Part #12-0719585) Used On Century, Vulcan, & Challenger Integrated and Rotator Heavy Duty Wreckers.

This is a replacement boom lift cylinder lower pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the base end of the cylinder and attaches the lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a Boom End Sheave for a Holmes 750 Wrecker. It is 8" in diameter with a 1-3/8" pin size diameter.

This Miller replacement grader blade is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055.

This is a replacement LED tail light retro fit kit by Zip's Truck Equipment. This is a retro fit kit that works on heavy duty wreckers. This kit includes 2 stainless steel tail light brackets, 4 LED red 6" Stop Turn Tail lights, 2 oval grommets, 4 3-wire pigtails, 2 LED red 2" round marker lights, 2 black 2" round grommets, and 2 2-wire pigtails, along with 4 reflective rectangular red decals.