Medium / Heavy Wrecker Parts

Miller Industries D-Ring for Heavy Duty Wreckers. Designed for use with Century, Vulcan, & Challenger Heavy Duty Integrated and Rotator Wreckers. Requires But Does Not Include Mounting Pin (Part #GA0215). This part can be used to replace Part Number MM12B.

Holmes Heavy-Duty D-Ring, Cast Iron. Typically used on Holmes 850's and 750's and some of the larger Century hydraulic wreckers. Requires Mounting Pin (Part #MM-8B) - Not Included.

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

These are bolt on aluminum tube pylon wings for heavy duty aluminum tube pylons by Miller Industries. These new style wings are designed to replace the composite pylon wings. They bolt to the side of your aluminum pylon and provide a nice, clean mounting platform for additional lights. Sold as a set which includes both the left and right wings.

3 Function Remote Control, easy grip plastic housing, 12' of cord from connector plug to controller, 3weather proof toggle switches. Designed to be used on Zacklifts but can be used on other applications.

This 3 Spool Control Valve from Miller Industries is used on the Hydraulics Assemblies of several Heavy Duty Wreckers. These include Century and Challenger Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a replacement shaft that attaches the boom end sheave to the boom end swivel weldment on Century and Challenger heavy duty wreckers by Miller Industries. This is the shaft the sheave spins on while the winch cable goes in or out. To see which models this shaft fits see Features below. To view the part schematics click on the Brochure tab.

This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a Boom End Yoke Cable Guide for Holmes 750 Wrecker

This Miller replacement grader blade set is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055. Kit includes 2 blades and mounting hardware.

This 2-bulb Amber Marker Light from Midwest Wheel comes with a plastic dura-mold base and a "scalloped dip" style lens. This marker is 4" long, 2" tall and 1" wide.

The small size and fully waterproof design makes the Dominator Series the versatile answer to all your secondary warning and signaling needs. This light is compact enough for special use vehicles, motorcycles, quads and marine applications. This small but powerful light is the solution to your unique warning light requirements. This light has white and amber flashing lightheads. This light is also ran off of a 12 Volt DC power source.

This is a replacement stinger extend hydraulic tube. The tube is 3/8" and fits Vulcan V40 and V50 wreckers.

Holmes Mounting Pin for the Heavy Duty D-Ring on 750 & 850 Wreckers. Designed to be used with D-Ring (Part #MM-12B). Cold rolled shaft with Dimensions of 8 1/2" x 1 3/8".

This Boom Fold Cylinder from Miller Industries is used on the Underlift Assembly of Century and Challenger Wreckers. Seal Kit is

This is a replacement stinger extend hydraulic tube. The tube is 3/8" and fits Vulcan V40 and V50 wreckers.

These are a pair of Whelen Micro-Edge Pod LED lights through Miller Industries. These lights are sold as a pair and include mounting brackets. These pod lights measure 10" x 8". These lights feature a 2 head amber LED's with a clear lens.

This is a replacement Parker 4 spool valve for heavy duty wreckers by Miller Industries. This 4 function valve works with most Century and Challenger medium and heavy duty wreckers. Common uses for this valve are to run your winch function, recovery boom function, and rear spade function. To view which specific models this valve will work with please see Features below. To view part schematics click on the Brochure tab above.

Miller Industreis crossbar die spring spacer for HD wreckers. Click on the brochure tab to see the part schematic of this item.

The Motec female 9-pole round socket has a universal application.

This is a replacement boom lift cylinder upper pivot pin for the Century 7035, 9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This is a 3/8" male connector by Miller Industries. It is commonly used on the hoses on a Vulcan V-40 Wrecker.

This Millennium M3 LED Light has a revolutionary design that adds hundreds of hours of life. It comes with a chrome plated plastic bezel that snaps into place around the light. Choose from Red or Amber and order your new light today!

Wireless Keypad Pouch

The "Ground Penetrating Plate" Is Designed To Be Used On Front Foot of Rotators or XPs, and On The Rear Spades Of Century Integrated and HD Fixed-Boom Units. The Sole Purpose Of The Single Pad Is To Dig Into Asphalt, Ice, Etc. Field Testing Has Proven It To Be A Valuable Tool In These Conditions.