Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Find the tools you need for auto & truck service jobs to increase your efficiency and safety. We carry lifting jacks, jack stands, wheel chocks, tire & wheel service supplies, truck service tools, detailing supplies, oil pans, filters, creepers, vehicle protection, fuel & lube transfer systems, and auto dollies. Shop these supplies to help you on your next roadside or shop service job.
This air filter features a cellulose/poly media with skip-a-pleat media stabilization and hot melt stabilization beads for a contaminant holding capacity that performs with a minimum efficiency of 99.9% contaminant removal.
A simple, yet ingenious, way to transport (and optionally store on the floor) your Auto Dolly sets when not in use. Works for any size Dolly. Make it much easier (and faster) than carrying them around one at a time. The Rolling Rack slips over one dolly and provides the handle and the support for the other three. Roll the entire set wherever needed.
The Tiger Tool slack adjuster rod pin press instantly shears off the cotter pin allowing the 3/16" clevis pin to be easily removed. It fits virtually all makes and models of automatic slack adjuster rod pins.
The Tiger Tool automotive bearing cup installer installs two bearing cups in one procedure on virtually all medium and light-duty U-joints. An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip. The u-joint is then rotated and the process repeated, effectively installing both bearing cups.
1" Ultra High Flow Automatic Nozzle for gasoline, diesel, E15, biodiesel to B20 and kerosene. Includes grip spring on spout, angled inlet to reduce hose wear, heavy duty, red weather resistant cover, 3-position hold open latch. UL/cUL. Made in USA.
The Tiger Tool Gunite/Brunner/Bendix slack adjuster puller safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters.
The Handheld Automatic Tire Inflator by Ken-Tool features a digital display and audible warning system. With two presettable inflation settings, users can customize inflation according to their preferences. This tire inflator offers auto-inflate and deflate functionalities, along with over-pressure setting and underinflation protection for added safety and convenience. Additionally, it features an automatic shut-off function to conserve battery life, enhancing efficiency and longevity.
The Norbar Gen 2 Break Back Two Piece Torque Wrench by Ken-Tool features an easy-to-read adjusting scale in the handle, this wrench allows for quick and accurate torque adjustments. Its split design assembly enhances portability and storage convenience, with a smaller carrying case included for easy transport. The push-through ratchet mechanism enables efficient two-direction torquing, while the replaceable ratchet assembly ensures longevity by allowing the replacement of worn or damaged heads.
The 2 Piece Break Back Torque Wrench by Ken-Tool is a strong torque wrench designed to be split into two parts for easy storage and shipping. Equipped with an easy-to-read adjusting scale in the handle, this torque wrench ensures accurate torque adjustments. Additionally, its push-through ratchet design enables two-direction torquing.
Balancing the tire, wheel and all moving components of the wheel assembly has many benefits, and it's very easy to do with the Balancing Beads from Ken-Tool. Able to be used with passenger, off-road, class 5-8 vehicles, motorcycles and light trucks, these beads self-balance in the tire thanks to memory technology.
Wheel lock rings can be difficult to remove and replace. With the Ken-Tool Industrial Wheel Lock Ring Tool Set, you can do it easier, faster and safer. With these two lightweight tools, it’s an easy process to remove and replace the wheel lock ring while being able to keep your hands outside of the press cage. This helps prevent injuries.
The 5 Gallon Tire & Rim Conditioner 640KS by Ken-Tool has a low-speed rating of 80 MPH / 129 KPH, making it ideal for trucks, buses, construction, and off-road applications. Operating between -10°F to 230°F (-23°C to 110°C), this tire sealant effectively dissipates tire chamber heat, reducing heat buildup and helping tires run cooler for enhanced durability. It also helps retain casing integrity, protects against heat, oxidation, and UV damage, and prevents cracks and blisters on inner liners.
The 5 Gallon Elite 640KS Tire Sealant by Ken-Tool is designed to seal up your tires to keep you going down the road. It effectively prevents air loss by sealing punctures up to ½", stops porosity to maintain air pressure and balances wheel end assembly for smoother operation. Depending on your need, it comes in two varieties. Check the chart below to be sure you pick the right one.
Making sure your bolts stay on tight is important, and a great way to do that is to see when they're coming loose. The HexChex Multi-Size Loose Wheel Nut Indicator from Ken-Tool does exactly that. By sliding them over the lug nuts and tightening them, the arrow indicator can let you know when the lug nut has become loosened. This process doesn’t take any tools to install. Plus, the seven different HexChex sizes are able to fit 31 different nut sizes.
Not every hole requires the traditional plug for it. Sometimes you just need a smaller plug to fit and stop the leak. This is exactly what the Safety Seal Slim Repair Refill was made to do. By being slimmer than the average plug, it can take care of smaller leaks.
The FR4210H model is a 12V DC, 20 GPM, heavy-duty fuel transfer pump. This pump and accessory bundle comes complete with a hose, nozzle, suction pipe, and installation components.
The Tiger Tool adapter kit easily removes and installs the Freightliner and Sterling pin & bushing #16-14603-000 while the suspension remains on the vehicle.
Originally designed for a customer who need to move an over-sized load, the Super Duty Dolly is a specially reinforced version of our 16" Dolly that also features SIX high capacity casters.
The Heavy Duty Universal Hub Puller is the answer for bearings that have seized to the spindle as a result of corrosion. Simple to set up and operate, the 10903 makes quick work of seized hubs including ConMet Preset, Dana/Spicer LMS, and Meritor Unitized. With six unique adapter sets to choose from, Tiger Tool's Heavy Duty Universal Hub Puller is as dynamic as you need it to be.
The Tiger Tool adapter easily services the Freightliner Airliner and Peterbilt Low Air Leaf rubber isolated pin and bushing while the suspension remains on the vehicle. Tiger Tool designed the push adapter with a defined edge to create more contact between the adapter and the sleeve of the bushing - essentially eliminating any slipping. Making the design even more meticulous, 28 magnets are built into the components of the tool. Altogether, this ensures the tool is easy to assemble, easy to install and keeps hands clear during operation.
Wrenches hold outer cap nut on dual wheels while the inner nut is turned. Lip fits in hole to secure wrench in place. Sizes offered fit standard and metric cap nuts.
This 360 degree swivel connector is all about versatility and is easy to use. A 3/4 in. inlet and outlet allows the connector to interface with a wide range of nozzles and hoses, giving it fantastic versatility.