Battery Chargers, Maintainers & Memory Savers

Associated Equipment 5 Amp Memory Saver 12Ft. Cable OBDII. Automotive Memory Saver Cable - This unit helps to prevent the loss of electronic memory when disconnecting the battery and using a power supply. The cigarette lighter / 12Volt accessory adapter can be used with any Associated Kwikstart receptacle, or battery charger with memory saver port (MSK Units).

The ATEC 3055A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery t ypes. Five charging modes are available 6V/2 Amp, 6V/4 Amp, 12V/2 Amp, 12V/10 Amp & 12V/50 Amp for engine starting. The built-in dig ital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier p rovide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correc t connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for be tter connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when th e starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

Portable Smart Charger 6/12 Volt Full-Rate Charger With 100A Engine Start. Automatic 6 &12 Volt settings turn off at full charge and turn back on if battery needs more power. LED Digital Display indicates charging voltage, amperage, charge time and countdown for start function

6021AGM is a 6/12/24 Volt Charger & Tester combination with a 12V AGM safe charge setting. This unit gives users the ability to choose between battery test or battery charge upon initial connection or after initial charge or test process is complete. The 'Dead Battery Override' switch recovers a dead battery and then tests it with the same unit, making the product very useful and timesaving.

Replacement battery for Goodall by Vanair Fleet Start.

The 6078 charger is an efficient parallel automotive battery charger. This unit delivers powerful performance by being able to charge up to ten 12 volt batteries in parallel, in less than 24 hours time. It is designed to operate on 220 volts AC 50 / 60 Hz. Features a patented multidiode rectifier with a deep reserve capacity, circuit breaker protection, isolated transformer, and the option to mount on a bench or a wall.

The Associated Model 6065 battery charger is designed to charge 1 to 10 12 volt automotive batteries in parallel, in parallel, in le ss than 24 hours. Designed with the fleet or high volume shop in mind. Great for salvage yards as well. The multiple charge rates al low batteries to be slow charged or fast charged at a rate not to exceed 30 amps output of the charger. Patented multi-diode rectifi er with deep reserve capacity. The volt meter allows you to adjust the charge rate to compensate for battery type, size and quantity of batteries on a charge. The output leads are terminated in ring terminals and designed to be permanently attached to the Associat ed 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended to be used as a car starting unit.

Associated Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status. For standard automotive, deep-cycle, AGM and GEL Cell Batteries. Electrical Stability System (ESSTM) technology feature is a 45 Amp stable power supply for extended service procedures or re-flashes (Nominal 13.7V DC Output). This unit also features a program for deep discharge recovery of flooded batteries saving you money on discarded batteries. Patented diagnostics indicate weak or defective battery. Battery Selector Switch For Sealed / Flooded / ESS Flash. Dead Battery Override Control. Heavy Duty Construction means it will last a lifetime. MADE IN USA

The ESS6007B Associated Equipment Automotive Battery Charger Boost Intellamatic has Electrical Stability System (ESS?) for re-flashe s. With nominal 13.7 volt DC output technology, the ESS6007B is a stable power supply for extended service procedures. It also has a program for deep discharge recovery of flooded batteries and patented diagnostics that will indicate if a battery is weak or defect ive. Designed to charge all types of 12 volt batteries including; AGM, Gel Cell, Sealed, and Standard Flooded batteries.

The GENIUSPRO, a 6-volt,12-volt, and 24-volt fully-automatic professional smart charger, maintainer, power supply, and battery-desulfator with temperature compensation rated at 50-amps for all types of automotive, marine, and deep-cycle batteries.

The series charger workhorse Charges 2-60 cells from 0 to 6 amps. With state-of -the-art, anti-spark delay, voltage is shut off when current is interrupted, eliminating sparking. Added safety feature provides greater protection when charging 10 batteries where the voltage approaches 158 volts DC. Output current can be smoothly adjusted over full range of front panel control. Polarity protection for operator and equipment safety. Nine charging leads included.

The ESS6008 Associated 60/270 Amp 12 Volt Automatic Automotive Battery Charger/ Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS?) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste. The Dead battery over ride switch brings batteries above the 4 volt minimum for testing and charging eliminating the need to pre-charge before testing. The 270 Amp boost for helps jump start vehicles. Made in the U.S.A. The "Does Everything" wheel charger which has 60 Amp charge rate and 270 Amps of crank assist.

Associated Equipment's Intellematic Model ESS6011 is a versatile 12/24V, 70/35A and 200A boost wheeled smart charger with a 70A power supply for standard automotive, deep-cycle, AGM and gel cell batteries. The Electrical Stability System technology turns the ESS6011 into a stable power supply for extended service procedures or re-flashes. The charger display includes an analog meter and three-stage LED charger indicator status.

This unit is a 12v 60/70 Amp / 270 Amp boost Smart Charger and power supply with 15 Amp memory saver port for standard automotive, deep-cycle, AGM and gel cell batteries. It includes a 12' memory savor cable and terminal covers. Program for deep discharge recovery of flooded batteries and patented diagnostics indicate weak or defective batteries.

IBC6008 Associated Intellamatic 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port. Includes 12V Memory Saver Cable and Terminal Covers.

This bus bar set has a 10 battery capcity for parrallel charging for use with 6066A smart charger or other parallel chargers.It is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA, 72" long with 300 Amp insulated safety clamps.

The Associated ESS6100 is a 100 Amp high power Smart charger Power Supply with inverter technology. It allows you to keep a 12 V lead, AGM, EFB, Gel Cell, or lithium batteries at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.

Meet the all-new GENPRO, similar to the NOCO GEN, only better. It's 10% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers. We offer the four, three, two and one bank onboard battery charger, rated at 10-amps per bank, for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes: 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, for all types of lead-acid and lithium-ion batteries.

Charges up to 36 automotive batteries in parallel, in less than 24 hours. Can be wall-mounted or on a stationary bench, 16 charge rates for precise charging. Each battery accepts charge required, depending on size, state of charge and temperature. Engineered so that an initial high charge rate tapers down to a safe finishing level. A isolated transformer and a heavy-duty diode rectifier with deep reserve capacity are standard features on this model. Model 6068 Battery Charger is designed to charge 12 volt batteries in parallel. The multiple charge rates allow batteries to be slow charged or fast charged at a rate not to exceed 110 amps output of the charger. The output leads are terminated in ring terminals and designed to be permanently attached to the Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended as a car starting unit.