Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Start vehicles effortlessly with jumper cable kits, jumper cable extensions, jumper cables, portable jump packs and starting units from Zip’s. We carry brands such as B/A Products, Phoenix USA, Goodall Mfg Co., Jump-N-Carry who make clamps, plugs, clips, weather cap, surge protectors, battery chargers, booster and bumper boxes to help you get vehicles back on the road quickly and safely.
Cables are 4 gauge with a standard 3/8" stud hole. Antimonial lead connectors resist corrosion, die cast process seals copper wire from acid fumes and corrosive salts. The tinning of copper wire before casting ensures durable bond between the wire and connector.
This 1.5 Amp 12 Volt battery charger/ maintainer automatically powers on when needed. Float mode engages when battery is fully charged. The durable plastic case prevents damage to charger from oil, water, gasoline and other automobile fluids.
6024 Associated Battery Tester provides a full 125 amp load test on 12 volt and 24 volt batteries, alternators and starters on all types of vehicles. It is lightweight and easy to use. This hand-held tester has a recessed meter to protect from damage. Features heavy-duty insulated safety clamps with 300 amp jaws and side terminal adapters. Durable and built for safety.
The KS40 models are built to last with a heavy duty impact-resistant case with a rubber base. Excellent for job sites, professionals, and heavy duty field use. Instantly jump-starts without another vehicle. Features a digital LED display with state of charge readings along witha built in digital voltmeter performing light diagnostics. Option of 36" or 84" DC leads with KS401 being the longest jumpstart cables in the industry.
Intellamatic 12 Volt AGM GEL Flooded Technology Automotive Battery Charger Analyzer Power Supply is perfect when just a little more power will do! Connect the terminals to your small or large battery and let it do the work. This charging system can perform the function of a battery charger, trickle charger, and a battery tender (can be left connected to battery to maintain charge) as well as "DEEP DISCHARGE RECOVERY". Electrical Stability System (ESSTM) technology feature is a stable 25 Amp power supply for extended service procedures or re-flashes and best of all it's Made in America. Whether you are dealing with a motorcycle or a large truck battery, the 9425 won't overcharge, because of its automatic float system. Three LED lights on front panel will tell you the state of charge. This portable and versatile charger will charge all 12 volt batteries.
The model 12-2415 analyzer performs 12V battery and electrical systems testing including the ripple diode test and earth ground as well as 24V starter and alternator systems. The tester has an integrated thermal printer with customizable header for shop use as well as the ability to key-in particulars for the battery model, vehicle license plate and customer name and is reverse-polarity protected.
This unit is for use with Models 6075, 6075CB & 6075S Bus Bar. 300 Amp insulated safety clamps when used with 6075. Automatic with 3 settings: Flooded, AGM and Manual.
This bus bar set is for parallel charging, ensuring a convenient way to hook up to four batteries/vehicles in parallel. It has a 10 battery capacity and you can use one or combine additional bars for added capacity. This is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA and 300 Amp insulated safety clamps.
This Goodall by Vanair Conversion Kit converts 2-cable systems to a 12-volt single cable unit. Goodall's upgrade kits come complete with reverse current protection, eliminating expensive repairs to your Start-All if the unit runs out of gas, and our advanced voltage regulation. Get the benefit of reverse current protection to keep your generators safe and advanced voltage regulation for today's sensitive vehicle electronics. This Upgrade Kit provides simple operation with all the controls and instructions in one location. You'll prefer the simplicity of full-power boosting through one set of cables.
Cables are 4 gauge with a standard 3/8" stud hole. Antimonial lead connectors resist corrosion, die cast process seals copper wire from acid fumes and corrosive salts. The tinning of copper wire before casting ensures durable bond between the wire and connector.
Replacement wall charger for ES2500/ES2500C models. Uses a small pin jack connection to a port in the rear of the unit to recharge the Booster PAC unit.
6044 Associated Equipment Model 6044 Automated Battery / Electrical System Tester with 6038C Cart - This is an automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the ?start? button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester. The 6044 also comes with external voltage leads which can be used to record the maximum and minimum voltage readings allowing for easy testing of electrical systems (including testing differential voltages). The unit also comes with a detachable inductive pickup (6043) which can be used to read current throughout the electrical system and a heavy-duty tilt-back cart (6038). The tester will also record the minimum and maximum current values turning many two person operations into a single, individual job.
12 volt Goodall Antizap by Vanair Surge Protector, for booster cables. Features an LED control panel built in to the housing. The LEDs indicate right or wrong connection and also indicate if the battery in the donor vehicle is capable of jump starting the distressed vehicle.
Full 125 AMP load tests 6 and 12 volt batteries, along with alternators and starters on all types of vehicles. Durable and built with a recessed meter to help protect this hand-held tester from damage. Features heavy duty insulated safety clamps with 300 AMP jaws and side terminal adapters. Capable to test the state of charge, battery load test, starter test and charging system test. The tester draws current from the battery while measuring its voltage level; the voltage level of a good battery will remain relatively steady under load, while a defective battery will show a rapid loss in voltage.
The 6033 Associated Digital 125 Amp 12 Volt Load Tester takes the power of our 6030 and adds features for performance. A Digital 125 Amp load tester that computes the CCA of the battery. The heavy 125 Amp load enables the 6033 to detect bad batteries that are some times missed by the electronic testers. Performance Features: Kelvin connected digital meter displays current battery voltage, maxim um voltage reading, minimum voltage reading, CCA of the battery under test, load test time (varies with the battery for shorter test ing time). Lightweight and easy to use. Also features a recessed meter and insulated clamps. Patent Pending.
Goodall by Vanair Plug-to-Plug Booster Cable is. This 2-gauge duplex cable is 20-feet long with non-reversible plugs on each end to ensure proper polarity when plugging into the mating connector. Plugs join with other 500 Series plugs. This cable is appropriate for heavy duty boosting up through semi tractors.
Heavy duty cart with 3 shelves, 2 large rear wheels, and a large handle that is precision designed to assist you in transporting your Associated Equipment chargers and load testers around the shop or home garage.
12-1015 Associated digital battery electrical system analyzer starter, alternator, ground and battery test with built-in thermo printer and USB port. The unit is a light weight hand-held digital battery tester storing the last 250 test series with or without power. Tests all types of flooded acid batteries, AGM flat plate and spiral, gel cells and enhanced flooded batteries. Easy to read in all light conditions featuring a back lit display. Battery test displaying estimated remaining life of battery in percent, battery quality (good or replace), internal resistance of battery, open circuit voltage of battery at test, battery CCA rating after test, and imputed CCA of test being performed. Starter test displays the lowest voltage of the battery during start and voltage drop ( normal or high). The alternator test displays good/low/high, average/max./min. during test for loaded and no load test, and checks diode ripple.
The 6080A Associated 6 Amp Battery charger for "Flooded" or wet automotive and "Maintenance Free" batteries. Charge up to 36 Cells ( 6 batteries) in Series. New technology enables higher output voltage for charging new batteries and rejuvenating sulfated batteries. Fully charges six maintenance-free batteries at a time. Has an isolated transformer for better safety, plus circuit breaker protect ion. Includes five charging leads. Mounts on wall or benchCharging Jumper Cups are used to connect batteries with top post connectio ns. Connecting batteries in series (see illustration) allows a person to charge a number of batteries at one time using only one low current, high voltage charger. The amount of charge that each battery receives is indicated by the ammeter. Thus, each battery will arrive in a fully charged condition at a different time. Conditions that affect charging time are battery temperature, size, state of charge, type of battery, and other factors. Six and twelve volt batteries may be intermixed when series charging. The total volta ge of the batteries should not exceed the rated voltage of the charger. Example: A Charger is rated a nominal 36 cells. Six 12 volt batteries in series or twelve 6 volt batteries in series can be charged or any combination of six and twelve volt batteries that tot al 36 cells. To charge batteries in series, connect the charger's positive lead to the positive post of the first battery. Connect a jumper from the negative post of the first battery to the positive post of the next battery. Continue until all batteries are conne cted. Attach negative lead of charger to remaining battery post.