Cargo Control

Replacement for AI-45982-90-27 and AI-45982-90-30. Used with Ancra X-Treme 2" ratchet strap assemblies.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. Reduces Weight per Winch by 2 lbs. on Average. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load. Low profile.

There are times when lesser binders won't measure up. You need a heavy-duty binder that can handle the task at hand. Whether it be heavy–machinery or tying down loads of concrete or steel on a flatbed trailer, the Durabilt (DF) DurAlloy Forged Series Binder has your back. This lever binder with a ball and socket design, was engineered with heavy-duty use in mind.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service.

Dangerous goods truck flip placards are displayed on vehicles and tanks to identify the risk of products being transported. We manufacture our entire placard line to meet Department of Transport (DOT) guidelines.

Ancra's standard storable portable w/2SS bottom mount web winch allows for temporary installation along either side of the trailer frame, giving you plenty of options to tackle unique tie-down situations. The strong build consists of a durable steel frame with a seamless, solid steel mandrel with a smooth ground web slot to prevent web wear, and high-strength alloy pawl pins for superior strength. The web winch can withstand up to 250 hours of standard salt spray testing thanks to its durable black powder coat finish, so you can be confident using the winch in any road conditions. Increased space behind the mandrel allows for unused webbing to be rolled up and stored on the winch to help reduce strap wear, while the portable design includes 2 screws to allow for temporary installation.

Quick disconnect fitting can be installed in pick-up bed, trailer or van. Fitting disengages completely from the contoured anchor plate.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. Reduces Weight per Winch by 2 lbs. on Average. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load. X-Treme Zinc gives your winches a longer working life and better corrosion protection than zinc-plated, paint or powder coated finishes.

Ancra's bolt-on plated floor chain tie-down allows the user to reliably secure heavy-duty cargo by chains from the floor, providing you with more options to tie-down a variety of cargo. Featuring 3/8-in. grade 70 transport chain for high strength and durability, the floor chain tie-down offers long-lasting performance and dependable strength.

Ideal for securing loads for over-the-road transport use. These chain end style locks into stake pockets or attach to D-rings. These straps have a 5,000 lb. WLL and reguire a ratchet or cargo winch for tightening. These straps are available in 3" or 4" wide.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. 4" Spool designed to reduce strap wear, spool discs guide and store the webbing into a single roll up to 30.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. Reduces Weight per Winch by 2 lbs. on Average. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load.

There's no excuse for loose chickens when the Durabilt (CTB) Poultry Cage Securement Series Binder exists. This specialized binder is made to tighten and lock up your poultry cage. With its ability to hold a working load limit of 3,000 lbs. this binder will ensure none of your birds fly the coup.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. Reduces Weight per Winch by 2 lbs. on Average. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load. Heat treated material maintains strength. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. For use with Ancra track AI-42357-11, AI-42357-21, AI-49242-10-120 or equivalent.

Replacement for AI-49346-13. Used with standard 4" ratchet strap assemblies.

Replacment for AI-49346-93-27 and AI-49346-93-30. Used with Ancra X-Treme 4" ratchet strap assemblies.

With Ancra's tension limiting ratchet assembly series E heavy-duty buckle strap with spring E fittings in hand, you will no longer need to worry about the problem of an over-tensioned tie-down strap. If a strap is tightened too much, it could apply damaging pressure to the cargo, and if that strap were to snap, it could cause significant damage to anyone and anything around it, not to mention that your entire load is compromised. Our tension limiting ratchet assembly is specifically designed to prevent that from happening thanks to our innovative ratchet buckle.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. X-Treme Zinc gives your winches a longer working life and better corrosion protection than zinc-plated, paint or powder coated finishes. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. For use with Ancra track AI-42357-11, AI-42357-21, AI-49242-10-120 or equivalent. Lighter weight 7mm.

Ancra's 10-ft. series F channel galvanized horizontal logistic track is engineered for the purpose of providing you and your loads the strongest and most reliable support for your cargo securement jobs. Once installed, the track can be used with logistic straps that are equipped with series F end fittings, allowing you to secure your cargo flat against the trailer wall. In addition, the track can be used with shoring bars to keep cargo stable throughout transit.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. Reduces Weight per Winch by 2 lbs. on Average. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load. Heat treated material maintains strength. 7mm. Allow for easy positioning in the track, but lock into place when tension is applied to the strap. For use with Ancra track AI-42357-11, AI-42357-21, AI-49242-10-120 or equivalent.

Liftall cargo tie-down with forged snap hook. These straps feature LiftAll standard polyester webbing offering exceptional value for everyday use.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. These winches are lighter than traditional models to help reduce fuel costs and increase net cargo capacity. Low Profile Leg Bracket.

Ancra winches comply with DOT, WSTDA-T3 and Canadian Standard 905 regulations. Powder coating finish withstands 250 hours of standard salt spray testing to ensure years of service. Lighter 7mm heat treated frame. Lighter 7mm weight reduces fuel expenses and allows for a greater pay load. Heat treated material maintains strength. Versatile and meant for temporary installation, and can be placed along the trailer side frame.

Constructed of high quality steel and finished with black powder coating for corrosion resistance. Holds two standard or heavy-duty cargo bars. A built in gasket reduces vibration and rattle while protecting the bars. Accommodates both 2" x 4" or 4" x 4" feet.

Ancra's high-strength 10-ft. series A powder coated horizontal logistic track can be used with a variety of cargo securement methods to help keep your loads stable and secure in the back of your trailer. Our series A track brings you more variety, allowing you to secure your load using series E end fittings, beam sockets, and decking/shoring bars.