Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Zip’s offers a large selection of cargo straps and chains from well-known retailers including B/A Products, All-Grip, and synthetic chain from Tycan to be sure you are ready to haul any load with lowboy trailers to pick-up trucks. We have ratchet strap assemblies, transport chains, chain binders, retrieval tools and more on hand and ready to use. With our continuously growing inventory you are sure to find the best quality and long-lasting cargo straps and chains that will get your industrial or recreational job done.
Note: Special Handling Fees Apply for Specific Items
Standard C track, designed for use with standard slider winches (AI-43565-127
and AI-43565-157), is available in roll-formed plate steel (AI-42357-11), or
aluminum (AI-42357-21) for aluminum trailers.
NOTE: This item has a $20 Handling Charge
Available Styles: Aluminum or Steel
Available Lengths: 6' or 12'
Made of High-Quality Aluminum or Steel for Long-Lasting Performance
Poly Deckboard for LAD System. For beams set at 24" on center. Tough high density polyethylene has excellent low temperature performance down to -40?F. Tested to demonstrate durability under load and vibration at -40?F.
Cargo beams and Lift-A-Deck beams are rated at Working Load Limits (WLL) that are 1/3 of the breaking strength or failure load capacity of the beams. In order to account for dynamics and vibrations that are experienced during transit and avoid overloading the beams beyond the WLL rating, the actual weight of cargo supported by the beams should be reduced below the rated WLL value of the beam. The allowable weight of cargo supported by the beams should be factored down based on anticipated dynamic G forces expected during transit.
Ancra's 10-ft. series A aluminum horizontal logistic track is built lightweight
for easier handling while still retaining the strength and durability you need
to reliably secure your valuable cargo. This track can easily be secured to
your trailer wall or floor with screws, rivets, or by welding. Once installed,
you will be able to experience a wide range of cargo restraint applications.
Ancra's heavy-duty aluminum series E & A beam assembly with flat latch is
engineered with the truck driver in mind with maximum strength at minimum
weight. Very easy to use, the beam easily inserts into the series E and series
A tracks to establish a firm connection. This heavy-duty beam can handle a
working load limit of 3,000 lbs. and is adjustable from 93.8 inches to 106.9
inches.
Installed inside the rear door of the trailer and protects drivers/operators from falling cargo that could have shifted during transport from location to location. Permanently installed in the trailer, the net moves forward and aft in the trailer using a roller system and the sides clip into E/A logistics track to position as close to the cargo as possible. When not in use, the net can be stowed in the rear of the trailer.
Wide Top Decking Beam with textured, 4-1/2" top surface to increase contact area for cargo on the beam deck. Aluminum beams feature a patented flat latch mechanism that eliminates the age old problem of damaged trigger mechanisms. It's easier to release, even while wearing gloves. There is even a replacement flat latch channel assembly that can be used to update your existing beams. Extend beam life and keep your costs low.
D-Rings and Connectors are spaced to accommodate various heights of loads. Each net comes with six (6), 1-1/4" x 5' long straps with a die cast cam buckle. Each strap has vinyl-coated S-hooks with wire keepers to prevent them from disengaging. 6" net openings.
D-Rings and Connectors are spaced to accommodate various heights of loads. Each net comes with six (6), 1-1/4" x 5? long straps with a die cast cam buckle. Each strap has vinyl-coated S-hooks with wire keepers to prevent them from disengaging. 6" net openings.
Versatile Security Divider & Deck Board. High density polyethylene panels with hand slots for easy positioning are ideal for securing household items, keeping your freight separate and secure. Used with lockable beams to provide a secure load divider. When used as a decking board, the cargo carrying capacity is determined by the beams supporting it.
When it’s time to make a quick repair to your logistic beams, you’ll need Ancra’s handy low-profile Allen sleeve nut and bolt kit to help you secure a beam channel assembly to the body of the beam. The Allen head bolt and sleeve nut feature a semi-flush head height of 0.10 inches. The bolt has a self-locking patch to prevent loosening due to vibration, so it remains firmly inserted into the beams. This kit can be used for our 43638, 49039, 49360, 49414, 50080, 50158, 50186, and 50191 logistic beams.
Replacement Channel Assembly with patented flat latch. 11 Gauge. Weight: 3.8 lbs./1.73 kg. For aluminum beams 43638, 49039 and 50158. Can be retrofitted into conventional trigger style beams.
Introducing our game-changing 3"x18" Fixed End Cargo Strap with Double J Hooks! Designed to revolutionize cargo securement, this innovative strap is the epitome of strength, convenience, and reliability.
Introducing our game-changing 4""x18"" Fixed End Cargo Strap with Double J Hooks! Designed to revolutionize cargo securement, this innovative strap is the epitome of strength, convenience, and reliability.
Introducing our game-changing 2"x18" Fixed End Cargo Strap with Double J Hooks! Designed to revolutionize cargo securement, this innovative strap is the epitome of strength, convenience, and reliability.