Rigging & Recovery Supply

Snatch blocks from SafeAll work great for a variety of applications. They consist of a single pulley or sheave protected by two outer teardrop-shaped side plates. A release pin with a cotter key sandwiches the plates together over the pulley. Remove both to access the inner pulley and insert the winch line.

Crosby Eliminators combine selected features and functionality of a master link, connecting link, grab hook and adjuster legs to provide you with one fitting that is suitable for applications that require an adjustable length chain sling.

This All-Grip Self-locking Clevis Hook is the perfect addition to your set. Safer than traditional latches, this hook doesn’t open unless there is no load on it. This prevents the risk of accidentally dropping the load, increasing safety and lowering damage. Plus, it’s able to be used with alloy chains and wire rope, meaning this safety can be added to almost any setup.

The industry standard for years. Standard-Duty Recovery Straps are less expensive, yet they feature nylon-reinforced eyes, a latex coating, interior red warning fibers and high working load limits.

The Ultimate Recovery Kit For a Carrier or SP8000 From Zip's. This Kit Will Allow You To Maximize The Recovery Capability of Your Car Carrier or SP8000 SidePuller.

This is a replacement decal which gives you the ratings for endless loop slings and chains.

Grade 80 foundry hooks from Zip's are typically used on chain slings and are therefore versatile at the recovery scene. Approved for overhead lifting, they are available in four capacities with the size stamped on the side of each hook. See the drop-down menu for available sizes and working load limits.

This new Guardian Angle by B/A Products provides reinforcement to the corners of trailer or box trucks when up righting over turns with synthetic web slings. This product provides a smooth surface for synthetic web slings to contact and slide allowing the strap to find home when tension is applied reducing the possibility of the strap catching on a 90? edge of your typical aluminum angle and rolling it away from the trailer. The rounded edge also helps to eliminate cut or torn straps. This products includes a safety catch strap and ratchet to keep the angle from falling and causing property damage or injury.

This grade 100 Crosby Coupling Link is proof tested 2.5 times its working load limit, making it extra reliable. Plus, the fact it has a 4:1 design factor only increases that reliability. Not only is it reliable, it’s highly durable. Made of forged alloy steel, this coupling link meets ASTM A-952 standards and has a WLL of up to 22,600 lbs, check the drop-down menu for more information.

Master links must be reliable, which is why the Grade 100 Crosby Master Link has been proof-tested. Not to mention, it also incorporates patented QUIC-CHECK® deformation indicators to make it easier to maintain. Finally, each link is marked with a product identification code, Grade, CE and chain size. This makes it so that you can trace it back to when it was made.

The straps all have tapered eyes and come in four lengths - 16'L for tanker recovery, 20'L for all-around use, and 26'L or 30'L for trailer, bus and high-cube work. Choose the single-ply versions for lighter loads or the double-ply versions that have higher WLL ratings for heavier loads.

These Spreader Bar Storage Brackets From Miller Industries are a great way to store you spreader bar on the top of your body side on a heavy duty wrecker. Sold as Pair.

The All-Grip Endless Loop Plasma Recovery Sling is very durable. Not only does it have better internal abrasion resistance, but it also has an advanced high-modulus polyethylene fiber construction making it stronger and ready to tough out your job. To add to it, it’s also corrosion-resistant. Even if there is damage to it, it’s easy to splice, inspect and repair, and there’s a very low risk of recoil if it snaps in the middle of a job.

Zips Snatch Block replacement latch kits. The kits are available in seven sizes. See the drop-down menu for available sizes.

This recovery package was designed for light duty recovery operators to upright passenger vehicles from their roof. The roll-over stiff leg is an excellent device for up righting an overturned vehicle, because the compression load on the stiff leg will force the vehicle to turn on its axis. Once the vehicle is on its side, the stiff leg will fall out as you continue to upright. WreckMaster offers this package in three different sizes depending on the weight of the causality that you will be uprighting. Each package comes with a 4 ft chain with a grab hook on each end and a 2 ft chain with a grab hook on each end as well as the stiff leg made from schedule 80 PVC pipe.

These Grade 100 Chain Assemblies come with a Twist Lock Cradle Grab Hook attached to each end of each chain. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting. These chain assemblies are Hi-Vis to make it safer at a recover scene.

Miller Chain Storage Rack for Heavy Duty Wreckers. Fits all Vertical Compartments on Century & Vulcan Integrated and Rotator Wrecker Body Sides.

Miller Industries SHORT Spreader Bar. Includes the short tube only. Allows for 58", 63" and 68" Lengths. Spreader Bar Ends sold separately.

Miller Industries snatch block storage racks for heavy duty wrecker lines. The storage kits allow the hook to be at the top for easier placement of the block in the storage compartments. These storage racks are offered in 3 size formats including a dual, quad and pod box for rotators. The pod box systems store up to 8 snatch blocks.

With a wider and deeper throat opening, this foundry hook stands out among the crowd. Allowing easier and more efficient attachment for chains and setups that need a larger opening, you can save time and effort. Especially on chain slings, this foundry hook easily connects with handles on molds or castings.

If synthetic slings are part of your daily work routine, it’s probably a good idea to use a hook designed specifically for them. Consider the All-Grip Round Sling Hook. Extremely easy to use, these hooks are color coded to match All-Grip sling strengths so you can work safely knowing the size and working load limit match.

B/A's recovery straps are the premier straps in the industry. Made from single ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

This Grade 120 Chain has a square link design. Grade 120 chain has a 50% higher work load limit compared to grade 80 and a 20% higher work load limit compared to Grade 100. The distinctive blue coat finish is a trait of grade 120 chain. Approved for overhead lifting.

The All-Grip Shackle Kit 12 Pieces comes with 10 shackles and 2 master links. With a working load limit between 17,000 pounds and 36,200 pounds, they can take on just about any job on your plate.

The McKissick Snatch Block Model 418 Light Champion is very sturdy. The hook, yoke and swivel tee are all made of forged steel. Despite that, it is significantly lighter than other snatch blocks that are made of non-alloy material.