Shop Supplies

Corrugated galvanized lid fits securely.

The Viair 400P Portable Compressor features a brand new I-Beam Sand Tray for improved stability and lighter weight. The 400P is a larger powerful portable tire inflator kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 6 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you re miles from home

The Magnolia Brush steel handle with baked enamel finish features two-piece construction that telescopes and locks in place anywhere you choose. Extendable broom handle takes this broom from 40" to 78" with a quick twist for any sweeping task.

Slip Plate is a heavy duty all purpose dry film graphite lubricant. It will not collect dirt, dust, mud or grit. Bonds quickly to any clean surface, eliminates sticking and material buildup. Will not wash away.

Solid wood Broom Handle is 60"L with a threaded metal tip. It fits all broom heads with a standard threaded hole.

The Harper Broom Heads feature small head sizes and works well in smaller, hard-to-reach spaces. Ideal for sweeping wet debris on rough surfaces. This compact Broom Head features strong, safety orange-color plastic bristles trimmed to 4-1/4". The Full Broom also features a 60" wooden handle.

These Brooms from Harper Brush work well outdoors under wet or dry conditions. This broom is specially designed for very coarse sweeping, with rugged hardwood block, 3"wide by 1 1/8" thick. The broom head has long wearing blue plastic coarse bristles and has a 60" handle with iron connectors and braces. Ideal for sweeping heavy debris, gravel, wet grass, mulch and heavy dirt. The broom bristles won't clump when sweeping liquids like oils, fuel, chemicals. The 4-1/4" trimmed bristles are made of a stiff, solvent-resistant synthetic.

The push broom steel brace has a long lasting powder coat finish. This brace provides stability to the broom heads and reduces strain on the handle. All hardware is included and easy to assemble with braces marked left and right. This replacement broom handle brace is for Harper brooms.

A must for every tool box! This quick cutter features resharpenable blades made of 1075 carbon steel hardened for long life.

Replacement snow rake part for snow rake SPR3. Intended for commercial use.

This sturdy canister mount from Austin Hardware and Supply can be bolted on or welded permanently to the back of your truck body to conveniently hold either a 3-gal. water jug or 4- to 6-gal. trash can. A buckled web strap holds the container firmly in place.

These air tanks can be mounted out of the way, such as under the vehicle of under a tool box, with only an air hose connecting the compressor. Available in 6 gallon (VA023) or 12 gallon (VA025) sizes.

This is a replacement push broom handle connector tip that connects your broom handle to the broom head.

We offer models to hold 4", 6", 8", and 14" length ties and a combination organizer to hold all 4 lengths. Our combination zip tie holder is a great way to not only store all your zip ties, it works great to keep your ties organized and easy to access. Made from steel and with a powder coated in a black finish, so you know it s built tough. You can install our Zip Tie Holders on any flat surface in your garage or trailer. Choose pegboard mounting screws, dry wall screws, metal screws or wood screws to mount the zip tie mount, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Get your quart can and bottles organized today with our In The Ditch Quart Can and Bottle Storage Racks! Our Oil Can and bottle holders are a great way to not only securely store your oil and spray bottles, but also keep them organized and easy to access. Each bottle is held individually to prevent tipping/sliding/spilling and the separation makes for quick and easy removal and replacement. Sturdy steel construction and our Endurance Black Powder Coat Finish keeps your Oil/Spray Bottle Mount looking sharp even after years of faithful service. Mounting to any flat surface in your garage or trailer is simple, just select appropriate hardware for your mounting surface: pegboard screws, wood screws, self-tapping metal screws, or drywall screws. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

These Tiger Tool 6 point axle nut sockets can remove and install various sizes of 6 point axle nuts without the risk of flaring or rounding out.

Helping others is the reason you started your business. When the call comes in for a customer who has run out of fuel, be prepared with a service vehicle that can bring several gallons at a moment s notice. Zip's has designed an aluminum gas can mount which can hold multiple containers and fits perfectly on the deck of your service vehicle, including the Holmes Tow Service Vehicles (TSV). With pre-drilled holes on the holder s feet, the rectangular mount takes just a few minutes to install.

This 128 Pc. 3/8" Drive 12 Point Standard SAE/Metric Mechanics Tool Set contains a carefully selected assortment of hand tools needed for most industrial, mechanical and consumer applications.

This tool holder has 4 tubes, each for a different tool to be stored in. The tool holder can be stored in the bed of your truck or bolted into any other surface.

Goodall by Vanair plug, 175 or 350 amp, no contacts. This is as the housing only, for the contact you need to order contact part number 820-431. It takes 2 contacts per plug. Choose from Grey or Blue.

This air compressor, Viair 350C, operates using low amp draw so they reversatile for many mobile pneumatic applications. Features include a standard 1/4" NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs.

One-piece system features two steel mounting brackets welded to the tank for easy installation. Pumps cylinder head has cooling fins to prevent overheating. Built-in pressure switch and gauge with brass fittings. Compressor is oil-less maintenance free. Comes with an in-line fuse holder with 20A fuse. Includes mounting hardware, 10'L flexible high-pressure hose and 20'L coiled fillet hose with brass fittings.

Goodall by Vanair 1 or 2 ga contacts for 175 or 350 amp plug.

Fuel Identification Tags prevent mix-ups or confusion as to which type of fuel should be used on different pieces of equipment. Tags are made of anodized aluminum and offer 3 visual means of identifying the correct fuel. Simply attach labels to equipment and matching fuel containers.