Shop Supplies

The Vanair remote control harness is used to connect the Vanair Air-N-Arc 300 hydraulic power system

Keep loaded and empty gas cans from sliding around the bed of your truck or the deck of your light-duty wrecker with custom gas can mounts from Zip's. Made from welded aluminum, these sturdy mounts can hold a single two-gallon container and can be bolted directly to the truck body. Holes are pre-drilled on the feet to aid in installation. Plastic gas cans can be punctured if not secured properly. Avoid a potentially hazardous situation with these quality holders from Zip's.

This is a 12 volt permanent mount air compressor by Voltair. It is a heavy duty cast iron twin cylinder, oil lubed compressor that runs at 470 RPM. It also has a 1 HP motor that has a 90 amp draw at 100 PSI. This compress will fill a 10 gallon tank from 0 - 150 PSI in 2 minutes and 55 seconds. It will recover a 10 gallon tank from 130 - 150 PSI in 35 seconds. The motor has a 2000 hour life. The dimensions of this product are 19" H x 18.25" W x 8.25" D. This air compressor weighs 110 lbs.

Zip's built aluminum gas can bracket holds (2) 2.5 gallon gas cans (included) and bolts to the end of a toolbox on a car carrier.

There are a million reasons to pick up a bucket. The All-Grip 5 Gallon Trash and Storage Container can handle 5 full gallons and is made out of very durable HDPE plastic.

No more bending over and tipping your fuel can in an awkward position. SureCan fuel cans put you in control of where your fuel goes. Made of high-density polyethylene with a comfortable grip and easy-to-use release and lock flow trigger. The flexible hose rotates down and more than 180° to easily fit into the fill location. CARB certified.

A ready-to-use cutting oil aerosol that eliminates heat at its source to ensure clean, smooth cuts and prolonged tool life. It is fortified with sulfur and chlorine compounds for extreme pressure applications. It is excellent for general and severe machining operations on hard metals such as stainless steel and carbon steels as well as on soft metals such as aluminum. It is ideal for low-speed operations that require high physical lubricity, including broaching, drilling, lathing, milling, tapping and gear-cutting.

Quickly sweep snow off your vehicles without harming the finish. Replacement snow rake part for snow rake SPR3. Intended for commercial use.

This Tork Universal Wiper 330 multipurpose paper wiper is soft, nonabrasive, solvent resistant and long lasting. Its 2-ply cellulose can absorb 4 times its weight and offers more effective wiping than other leading brands.

Oasis Manufacturing carries a variety of 1/4 of an inch NPT air fittings, all with dimensional compatibility with other NPT threaded fittings. Our fittings can be use to fit a threaded hole in an air cylinder, actuator, air tool handle, valve, and more. Our current selection includes adjustable pressure switches, open super chucks, male and female NPT couplers and plugs, tank and safety valves, tank gauges, and a 25-foot urethane hose.

Keep your paper towels and cleaning supplies at the ready in your garage and trailer with our Paper Towel Holder with Shelf. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. This shop towel rack includes a hold-down flap that keeps your towels from unspooling in the breeze and perfectly positioned to pull the next sheet while the integrated shelf keeps your cleaning supplies and shop gear organized. Our paper towel rack with shelf works great on any flat surface including drywall, wood, metal, and pegboard using our optional hardware.

The SnoBrum offers consumers a way to quickly sweep snow off a vehicle and away from the user with complete confidence that there will not be any abrasion or color marks on the paint when the job is done. The oversized head safely removes snow from vehicles, trailers, awnings, spa covers and all other delicate surfaces.

The Grease Joint Rejuvenator forces light oil into a grease joint, flushing out old hardened grease and allowing new grease to be pushed through. The reason why the grease does not go into the fitting is not because of the fitting; it's because the grease has dried up inside of the joint or pin groove. Simply put, you cannot push new, soft grease into a joint if the old grease has become hard and dried, blocking the new grease.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 12", and 18" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

This 24" Hydraulic Hose Cutter will easily cut through steel braided hydraulic lines, making clean and precise cuts when it does.

Our Aluminum Wall Hooks are a versatile and easy option to organize your truck, shop, garage, or trailer. We offer hooks in 3", 5", and 7" lengths. The heavy-duty aluminum alloy construction gives these hooks a structural rating of 100lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surfaces. Load rating may be limited by the mounting surface.

The 285B model impact wrench combines exceptional power, durability and operator convenience. It delivers 1,450 ft.-lb. of maximum torque, with a 5,000 rpm free speed and high-efficiency six-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The 6" extended anvil along with the swept-back side handle provides excellent maneuverability. Features: high efficiency, six-vane air motor and three-position power regulator. Tool includes protective boot kit. Air Impact Wrench 1" Drive with 6" Extended Anvil 1475 ft/lbs Max Torque.

Weighing in under four pounds, this Green Thumb square-point shovel from Ames Ture Temper features a lightweight fiberglass handle with a comfortable ribbed grip for extended use.

This General purpose Do All Broom features a combination of soft and stiff synthetic fiber bristles trimmed to 3-1/8" for clean sweeping. The Full Broom features a 60" wooden handle.

Heavy Duty Grease Gun Coupler.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Viair's Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

Keep your gas cans secure and within easy reach with this custom gas can mount from Zip's. The aluminum bracket is designed to bolt onto storage boxes on the underside of car carriers. The rectangular box holds two 2.5-gal. gas cans and includes holes for straps to run through the can handles. Gas cans, straps and mounting bolts not included.

Quickly sweep snow off your vehicles without harming the finish. Intended for commercial use.

Secure your gas or diesel cans when on the road. Bracket and strap system holds one 5-gal. can or two 2-1/2" gal. cans securely. Black powder-coated steel bracket features slots for the 5'L nylon strap, which secures your fuel cans.