Car Carrier Supply

This ITI Height Extender is designed to work in tandem with the ITI Control Arm Skate (Item #

All car carrier operators should own the ITI Rollback Standard Kit to assist them on their recovery job. This basic package includes a set of four Automotive Skates to help move disabled or locked vehicles, as well as a Control Arm Skate and Height Extender for vehicles with wheel impairment or suspension issues. ITI skates are known for their durability and reliability. This kit will help you complete your next call in a timely and efficient manner. Save over buying these skates individually.

The GUNIHUB 45 universal rotating hub is the ultimate mobility tool to load a vehicle onto a car carrier or to move it to another location when the brakes are seized or when the vehicle is stuck in the gear. This free-rolling hub adapter also works great for electric vehicles with dead batteries or classic car barn finds that have been sitting for awhile. Just bolt the GUNIHUB 45 to any 4 or 5 lug pattern for full wheel rotation. A locking pin is included to keep the hub from spinning when parked. The hub is also notched to allow for the use of power tools. Please note the GUNIHUB 45 is for non-motorized use and only works with the GUNIWHEEL 45 or 45S temporary wheel replacement system.

These Quad Tire Skates are made by Turtle Plastics. They are 13" wide x 17" long. The rope handle is for handling only and it is not designed to be used as an attachment or pulling point.

This ITI Height Extender is designed to work specifically with the the ITI Low Profile Control Arm Skate (Item #

Tow a variety of light-duty and recreational trailers with your Miller car carrier with this convenient receiver kit from Zip’s. The powder-coated bracket bolts on to the crossbar of your carrier’s wheel lift and will fit any 10 Series, 12 Series LCG or 16 Series LCG Gen II Miller car carrier models built after September of 2016.

ITI has produced a yellow Signature Series of its popular line of skates to help tow operators identify them in low-light situations and, therefore, keep better control of them under a pull. They are made from the same durable material as ITI s traditional, earth-tone line of skates but offer greater visibility at night and better contrast against gravel and dirty road surfaces. To make sure you have the right skate for the job, ITI has assembled this line of yellow skates into a Rollback Essentials Kit. Included are a set of four automotive skates for use with most passenger vehicles. The kit also features a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Save over buying these skates individually.

This ITI Machinery Skate is designed specifically for moving equipment and other heavy machinery. These ITI Skates will drastically reduce the moving resistance allowing for easier placement of heavier equipment while protecting the floor. The low-profile design features a beveled cutout on the skate surface to cradle machinery legs, when needed. Flip this skate upside down and use it as a loading ramp to provide a tapered approach.

ITI Axle Tube Height Extender works in tandem with the ITI Standard Control Arm Skate (Item #

The Century trailer ball adapter kit is designed for Century car carriers that have the ear welded on the back side of the crossbar. The kit includes a 2" ball and a wrench for installing and removing ball.

GuniWheel's GuniSpacer 56 provides clearance for assemblies with over-sized brake calipers. For use with GUNIWHEEL 56.

ITI XL Big and Tall Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck with larger tire dimensions. This XL skate is 5 inches longer than the standard "Big & Tall" skate - perfect for the oversized pick-up truck tires. It is also great for use with equipment or tractors with larger tires.

The Flush End Container Skate from ITI makes loading or moving shipping containers slick and easy! This container skate is unique in that it is designed to sit flush to the edge of the shipping container. This allows for closer side-by-side storage of the containers when in a storage yard. This patented skate has a low-profile design allowing a lower overall height of the container when loaded on a trailer or a flatbed on a truck. Place the sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI Crossmember Container Skate makes loading and moving shipping containers easier. When the corner pockets are not accessible due to dirt, mud or debris - this handy skate is the tool to use. Simply find a crossmember on the bottom side of the sea container and place the crossmember into the 4x4 pocket and winch into position. The skate's tapered end eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

GuniWheel M14 open end nut. Pack of 5. Actual color may vary.

This Reese Receiver Wheel Lift Adapter from Miller Industries is used on Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series, 12 Series LCG and 16 Series LCG GEN1 built before Sept. 2016 standard wheel lifts. All of the mounting hardware is included on this adapter. For a complete Pintle Hook Receiver Kit see part # ZP-CC-PHK. This part can be used to replace Part Number 12-0809073.

This Pintle Hook Receiver Kit from Zip's is used on Miller Car Carriers. Utilizing the Miller Reese Receiver for Car Carriers (part #

This trailer hitch adapter is for Century Formula 1 Wheel Lifts. It was manufactured before March of 1996. This adapter will allow you to tow a trailer with a ball type hitch behind your wheel lift. It installs quickly and is small enough to fit into your tool box with it is not in use. This hitch adapter comes with a 2" trailer ball, mounting bolts and a primed adapter. This trailer ball adapter also fits Holmes DFT-400 and Challenger I-400 wheel lifts that were manufactured before March of 1996 and Century/Champion car carriers that were manufactured before January 2000.

GuniWheel M12 open end nut. Pack of 5. Actual color may vary.

The Traveling Speed Chock from In The Ditch helps prevent vehicles from rolling off the deck of a car carrier during loading and unloading. Chock travels up the deck with the vehicle and will help prevent the vehicle from rolling off the deck should you have a catastrophic failure of the winch of wire rope. People who have used it are calling in a Life Saver! The chock can be set up to work from the passenger or driver side. It will easily adjust to fit most passenger vehicles. The rubber chock is sipped for better holding ability. Shop our large selection of

This Large ITI Machinery Skate is designed specifically for moving equipment and other heavy machinery. These ITI Skates will drastically reduce the moving resistance allowing for easier placement of heavier equipment while protecting the floor. The low-profile design features a beveled cutout on the skate surface to cradle machinery legs, when needed. Flip this skate upside down and use it as a loading ramp to provide a tapered approach.

Engineered to perform together, the GUNIWHEEL 45S and the GUNIHUB are your solutions to relocating vehicles which don't want to move. Tow operators can use this portable pair for wrecked vehicles stuck in gear or locked vehicles parked in the wrong spots. Body shops can use them on barn finds or restoration projects with seized brakes.

This Trailer Hitch Adapter from Miller Industries is used on a Century Formula I Wheel Lift that was made after March of 1996. It allows you to tow a trailer with a ball type hitch behind your wheel lift. The Hitch installs quickly and it is small enough to fit in your tool box when it is not being used. Also fits a Holmes DFT-400 and Challenger I-400 Wheel Lift.

Make sure you have what you need for your next call with the ITI Rollback Essentials Kit. ITI skates are known for their durability and reliability when it comes moving locked or disabled vehicles. This kit features a set of four automotive skates for use with most passenger vehicles, and a pair of Big & Tall Skates and a pair of XL Big & Tall Skates for those larger tires found on pickups and SUVs. The kit also includes a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Lastly, the ITI Rollback Essentials Kit comes with a Trailer Jack Skate for moving trailers or protecting receiver hitches. Save over buying these skates individually.

GuniBolt M14 x 26mm x 1.5mm. Actual color may vary.