Custom Trim & Accessories

Trim-Lok's edge trim is flexible Poly Vinyl Chloride (PVC) trim with individual internal metal clips and gripping tongue to provide a stronger grip. As you likely already know, having the right rubber trim for metal edges can make an impact on any project. Whether you run an auto repair shop and need sewable upholstery trim for cars and trucks or manufacture furniture for a living and require decorative trim for your line of products, Trim-Lok manufactures flexible edge trim that can be used in many different industries. As an added bonus, each flexible edging strip purchased from Trim-Lok is manufactured with individual internal metal clips and a gripping tongue. These clips and tongue provide a stronger grip, meaning Trim-Lok's line of edge trim products will last longer than many alternatives available on the market. If you're looking for a flexible metal trim with strong gripping power, excellent resistance to sunlight, water, and the ozone, and a strong, outer coating material, look no further- build your own edge trim today and see the difference for yourself.

This fire retardant trim from Lavanture Products Co. is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a thermoplastic Vulcanizate (TPV) material formulated to pas the National Fire Protection Agency (NFPA) standards. This material also complies with the UL 94HB flame requirements most commonly needed in electrical enclosure applications.

Note: Special Handling Fees Apply for Specific Items

Phoenix End Stanchion for 7/8" or 1 1/4" diameter handrail.

Phoenix Body Accessory Stainless Steel Tube.

This is a polished stainless steel dress-up kit for the SP9000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

Note: Special Handling Fees Apply for Specific Items

These Stainless Steel Door Guard Kits are from Miller. They are designed for a Century Box.

Note: Special Handling Fees Apply for Specific Items

This Stainless Steel Door Trim Kit from Miller Industries is used with a Century 3212, CXVX, or V30. Comes with two pieces of trim and a roll of adhesive to attach with.

Available in the following sizes

Item #	Size
124004574	V30-Tall-120"
124004575	V30-Tall-138"
124002613	CXVX/3212/V30 - 3 Door - 120"
124004761	CXVX/3212/V30 - 3 Door - 138"

Stainless Steel Door Guard Kit for Tunnel on Century Large Wrecker.

Trim-Lok's trim-seal is a flexible PVC trim with a sponge rubber bulb attached to provide a secure seal for a variety of applications. It protects against moisture and weather damage. With strong gripping tongues and resilient design, Trim-Lok's trim seals and bulb gaskets are sure to stay in place, even in extreme temperatures and erratic weather conditions. Regardless of the application, our extruded rubber bulb seals will seal and protect against weather damage so your products won't be affected by rain, snow, wind, or extreme heat.

Trimloc rubber edge trim seal 1/8" x 5/8" x 9/16". Use around truck cabs, RV doors, lids, golf carts, garage doors, tractors, ATV fenders, fiberglass, sheet metal and more. It prevents leaks, gaps and vibration. The flexible PVC trim with a metal clip inside provides a permanent grip.

Phoenix Center Stanchion for 7/8" or 1 1/4" diameter handrails.

Front Body Trim for Road Service Body, Aluminum Deck Plate.

Trim-Lok's bulb trim seals are manufactured from a flexible PVC trim with an attached EPDM sponge rubber tubing, ensuring a safe, secure seal for a variety of applications. With strong gripping tongues and resilient design, Trim-Lok's trim seals and bulb gaskets are sure to stay in place, even in extreme temperatures and erratic weather conditions. Regardless of the application, our extruded rubber bulb seals will seal and protect against weather damage so your products won't be affected by rain, snow, wind, or extreme heat. They are the product of choice for the automotive, marine, and transportation industries. It is used on the body assembly of Century and Vulcan wreckers.

Note: Special Handling Fees Apply

1-1/4" Hand Rail Kit from Miller Industries. This Kit includes 2 20' rail pieces, stanchions, and fasteners needed.

• 1-1/4" Hand Rail Kit
• Includes all rails, stanchions, and fasteners needed

This is a replacement Large Stanchion Gasket by Phoenix USA. This part can be used to replace Part Number 4000G.

This Aluminum Door Trim Seal is for the new style Miller Heavy Bodies.

This Stainless Steel Cylinder Wrap Kit from Miller Industries is to be used on Century 9055 and 1140 trucks. The kit will include enough products to do up to 2 cylinder wraps.

This is a tailboard dress-up kit from Miller Industries. For this dress-up kit, you can choose from diamond plated or smooth finish accents. This aluminum dress-up kit includes the left tailgate panel, right tailgate panel, and tower panel. This dress-up kit will fit on a Century 5130 and 5230.

These stainless steel screws are used with 7/8" stanchions. They measure 10/32" x 3/4", which is the correct size for low-profile handrail stanchions. These screws will maintain a clear, rust free appearance.

Tim-Lok's flap seal is a flexible PVC trim with an EPDM sponge rubber flap attachd to provide a secure seal in a variety of dynamic applications.

This stainless steel Trim Cover, from Miller Industries, is for each end of the H-Beam Outriggers. This will work with the present outriggers witht he horseshoe on the outside.

Aluminum Dress Up Kit (Tailgate Only) for the Body of a 7035, 9055. Includes Left Tailgate Panel, Right Tailgate Panel, and Tower Panel.

This Tailboard Dress Up Kit from Miller Industries can be used on Vulcan V-70 and V-100 trucks.

This Kenworth Dummy Stack is from Miller Industries. Mounts on Top of D.P.F.

This Dress up Kit from Miller Industries is to be used with the 22,000 lb. side winches on rotators.

Trimloc rubber edge trim seal 1/8" x 5/8" x 9/16". Use around truck cabs, RV doors, lids, golf carts, garage doors, tractors, ATV fenders, fiberglass, sheet metal and more. It prevents leaks, gaps and vibration. The flexible PVC trim with a metal clip inside provides a permanent grip.

These kits are Stainless Steel Door Trim Kits from Miller desighed for Vulcans.

The rear trim panel is standard for the SP9000 SidePuller. Made out of stainless steel, the panel is sure to last. The steel has been polished and has a mirror finish, giving it a professional look. With its bolt on design, it makes the panel very easy to install and replace.

Phoenix Chrome Plated Steel Grab Handle.

This is a polished stainless steel dress-up kit for the SP12000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

Aluminum tread plate trim rock protection for 4024 tail board and rear of boom. Easy to install using 3M double sided tape.

Phoenix Aluminum Grab Handle That Measures 16" x 9" x 1.25".

Miller Stainless Steel Door Guard Standard Kit. Designed for a 3212.

Trim-Lok's D-shaped EPDM 5272 series sponge rubber seal has a height of 1" and a width of 1". Sold by the Foot. 125 FT MIN ORDER

Ever wished you had that perfect grab handle in the right location. Wish no more, In the Ditch has come up with a grab handle that can be mounted anywhere you want it. It is designed to work with bare hands or gloved hands because we know users come in all sizes and work in all kinds of weather. These grab handles are made from aircraft grade aluminum and incorporates a solid billet aluminum handle that will last for generations. Also included with this handle are stainless steel fasteners. This handle is rated for 300 lbs., but that is limited to the surface that you are mounting this handle to. This grab handle is made to be mounted to a flat surface.

Note: Special Handling Fees Apply

Aluminum tread plate trim rock protection for 5130 tail board and rear of boom. Easy to install using 3M double sided tape.

• Aluminum Diamond Plate
• Cut to fit

Stainless Steel Screws for 1 1/4" stanchions. This part can be used to replace Part Number, 114-SS.

This fire retardant trim from Lavanture Products Co. is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a thermoplastic Vulcanizate (TPV) material formulated to pas the National Fire Protection Agency (NFPA) standards. This material also complies with the UL 94HB flame requirements most commonly needed in electrical enclosure applications.

Miller Industries Tailboard Dress-Up Kit for Century 4024. Diamond plate. Kit includes left tailgate panel, right tailgate panel, and tower panel.

Kenworth Stainless Steel Bug Shield fits T170, T270 AND T370 includes hardware.

This is a polished stainless steel dress-up kit for the SP20000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

If you are looking to add style and beauty to your truck, you'll turn heads with this grille.

Additional Tailboard D-Rings for All Heavy Duties.

Stainless Steel Mounting Screw for 7/8" Tubing Kit.

Ever wished you had that perfect grab handle in the right location. Wish no more, In the Ditch has come up with a grab handle that can be mounted anywhere you want it. It is designed to work with bare hands or gloved hands because we know users come in all sizes and work in all kinds of weather. These grab handles are made from aircraft grade aluminum and incorporates a solid billet aluminum handle that will last for generations. Also included with this handle are stainless steel fasteners. This handle is rated for 300 lbs., but that is limited to the surface that you are mounting this handle to. This grab handle is made to be mounted to a curved surface.

Aluminum Dress Up Kit (Tailgate Only) for the Body of a 7035, 9055. Includes Left Tailgate Panel, Right Tailgate Panel, and Tower Panel.

This Stainless Steel Cylinder Wrap Kit from Miller Industries is to be used on Century 9055XXL. The kit will include enough products to do up to 2 cylinder wraps.

This is a dress up kit for a 920 and 930 from Miller.