Truck Chassis Accessories

These red plastic fenders from Minimizer are designed to fit a single axle tractor or trailer with 19.5" wheels. These fender kits are very lightweight, yet durable. The total weight of this fender kit is less than 14 lbs. Use B100BTPA mounting brackets to mount fenders to truck. Sold as Pairs.

REALTRUCK BACKRACK L-Brackets For Full Size Light Bar. Standard No-Drill Hardware Kit is designed to be used on trucks that will not have a cross bed toolbox behind the cab. Consists of a rail mount bracket and rail plate that adds strength to the sheet metal bed of the truck. The rail plate provides a solid base to secure the cab guard assembly. Toolbox No-Drill Hardware Kit accommodates a standard 21" cross bed toolbox (not included). The toolbox sits on top of the toolbox brackets allowing you to slide it forward so bed space is not wasted. The toolbox is secured to the brackets by drilling sheet metal screws through the toolbox into the top of the bracket. Accessories include a variety of mounting brackets for work lights, directional bars, light bars, antennas and offroad light brackets.

Heavy-duty, stainless steel mirror housings 5/16"-18 mounting studs 12V DC 7"W x 16"H

This replacement Throttle Head Assembly from Buyers is for the 4100 Series Throttle Cables. Get your 4100 Series Throttle Cables

This is a replacement lightweight camera guard.

Motorists will hear you before they see you with this Bad Boy Air Horn from WOLO. Bad Boy is the latest in air horn technology, a patented one-piece design that requires no hoses. The unit installs easily in minutes by simply transferring the factory horn wires to the included heavy-duty compressor. Its compact size will fit any 12-volt vehicle.

Highway Truck Chains? CAM locking system eliminates the need for chain tighteners. Simply tighten CAM lock with included tool to tig hten chains to your tire.

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 4x4 Super Duty model years 2011-2016. It comes with a grille guard.

This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Extenders attach to existing valves; brackets mount under hand holes. Nickel-plated and braided stainless steel valve extenders with stainless steel mount brackets. Multiple angles for better access to front and rear valve stems. Not for use with snap-on wheel covers. Sold in pairs.

This mud flap back up strip from Miller Industries is used on light duty wreckers.

The Safe-T-Alert? Back-up Alarm features an Epoxy-encapsulated circuit board to protect against damage from dust and moisture. This alarm is polarity protected and complies with SAE J994 Type D. Measures 4"W x 2-3/4"H x 1-5/8"D. 12-80V DC. 87dB.

This is a v-bar cross chain for better traction in snow or on ice.

This universal adjustable ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Once the holder is adjusted for the right size it will allow you to easily insert and remove the device with our spring action corner. With this tablet holder you can use your tablet in landscape or portrait view, and easily rotate between the two positions. You can also angle/tilt the tablet 15 degrees for better viewing and to avoid glare.

This Push Bumper from Diversified Products Mfg. is built for Ford F-450/550 Super Duty model years 2011-2016. It comes with a grille guard.

Keep the interior of your truck looking great with a new seat cover from Tiger Tough. Guaranteed not to come loose, this seat cover will fit 2019-2022 Ram HD Trucks 40/20/40 seats without underseat storage. The reinforced seams and custom fit won't let your cover shift or wrinkle when pulled tight. All factory options remain accessible as well. Keep your seats looking new with a quality seat cover from Tiger Tough.

This 5/16" Throttle Wire Stop from Buyers Products is used to set the collar for a throttle stop.

Four Hose Valve Stem Extensions with heavy duty brackets.

Heavy-duty, stainless steel mirror housings 5/16"-18 mounting studs 12V DC 7"W x 16"H

This mud flap bracket is for the Century Midnight Express 300 & 812 Series Wrecker.

Phoenix Wheel Simulator for Ford F450/F550 - 2003 to 2004. Firestone / Accuride dual wheel - D.O.T Liner.

1" shank with nut included (Trailer balls not included)

Universal replacement head for the tripod mirror kit measures 7-1/2" x 10-1/2" with stainless steel housings. Heated Mirror comes with 60"L wire lead.

Phoenix D.O.T. Liner Dual Wheel Simulator Set. For Wheel Sizes 22.5" x 7.5" & 22.5" x 8.25", with 10 Lug Hub Pilot, 285 MM BC, and 2 Hand Holes. All Necessary Hardware and Tool are Included for Immediate Do-It-Yourself Installation.

These are available as a single or pair - 22.5" black replacement fenders