Truck Lights

Buyers Products 0.75 Inch Round Marker Clearance Lights with 1 LED are used on trucks and trailers to meet FMVSS/CMVSS 108 regulations. The round marker lights have a single LED and are PC rated to produce a 90° angle left and right of center when properly mounted. Lights are available in red, clear, or amber with smooth or faceted lenses. They mount with either blunt cut leads or .180 in. male bullet connectors. The clear lights cannot be used as a marker light.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

Maxxima introduces the new M09300 series of P2PC Combination Clearance Marker Lights. Each light comes with an attached grommet for quick mounting. 3 SMD LEDs provide superior light output. "LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

Buyers Products 6 Inch Oval Stop/Turn/Tail Light with Clear Lens and 10 Red LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations.The light has a clear lens with bright red LEDs. It uses a PL-3 connection.

Tail Light housing for new style Century & Vulcan modular bodies. Fits 2008 and newer. Left side.

This taillight housing features a wraparound design for the Jerr-Dan MPL wrecker body and allows lights to be seen from the rear and side. The triple bracket holds three taillights. Lights sold separately.

Add visibility to your Ford truck by replacing factory cab lights with Atomic LED Pro Series Strobing Cab Marker Lights. These lights feature six different flash patterns including steady burn. Lights fit 1999-2016 Ford F250-F750 trucks. Amber LEDs. Kit Includes: (5) Cab lights, (5) Rubber gaskets and (1) Alternating flasher.

This 6" Oval Stop/Turn/Tail Light comes with a sealed lens and housing style. It also fits into oval grommet. 12 Volts

Phoenix License Plate Bracket with Light.

LED Back-Up Lights feature sealed-body construction to keep out moisture and internal LEDs for a long life. 12V DC.

The LightningS Back-up series light is equipped with Nine 8mm LEDs in a flat back slim profile design. The LightninS Series utilizes Patent Pending lens technology exclusive to Maxxima along with standard PL-3 connector. This extremely cost effective Back-Up light has been specifically designed for Fleets' and OEM's.

These TLED-2X dual revolution marker lights to auxiliary LED lights include 7 diodes and are D.O.T compliant. The marker to auxiliary LED lights are built with a polycarbonate lens which is resistant to cracks and damage.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

Maxxima introduces a new improved patented* chrome LED cab marker light for 2008. The M27011Y & M27011YCL are equipped with 8 bright 8mm LED's in a new sleek chrome design available in both amber and amber clear lens versions. The Maxxima LED cab light costs about the same as a replacement incandescent OEM light.

These 4" round body lights from MAXXIMA with clear lenses meet federal DOT requirements. However, check with your local DOT office to ensure that clear lenses are allowed in your state. Nine red LED lights offer stop/tail/turn functionality.

These 33 Series 3/4" Sealed Red LED Lights from Truck-Lite are the worlds smallest LED marker for the transportation industry. This light comes with 3 Red LED Lamps with .180 bullets and grommet mounts. All 3 lights are connected to the same power cord. Lights come with a polycarbonate lens and housing, PVC grommets, Nylon flange and 16 gauge wire.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

These marker to auxiliary LED lights are industry leading dual revolution technology. They are protected by a polycarbonate lens which is resistant to cracks and damage and the lights are D.O.T compliant to auxiliary funcion all in one.

The M85427R-YCL is a 5.5" Round, Flange Mount, Combination Stop/Turn/Tail (STT), Back-up (BU) Light, and Amber Flashing Warning Light. Maxxima's patented LED Flange contains 9 White LED's and 9 Amber LEDs. In addition, our patented Lightning Optics provide superior off-axis visibility for improved driver safety. 7 discrete wires allow dedicated Flashing Warning light capable of single-color patterns or dual-color flash patterns, as well as on optional dedicated Amber Turn Signal for use on vehicles equipped with a dedicated turn signal wire. M85427R-YCL is thin-profile at 0.5" depth and is backed by a 5-year warranty.

Add a little style to your work truck with these polished Mini Oval LED clearance lights from MAXXIMA. The multi-tier, stainless-steel bezel snaps into place, and the compact design allows them to be mounted in tight spaces. Featuring seven LEDs, these lights are available in amber or red color with a clear or tinted lens.

The New M42206 Series from Maxxima is an Ultra 0.4" Thin Low Profile light that can be surface mounted with two screws/covering caps or use the optional 3MT adhesive tape mounting kit. Featuring polycarbonate lens & housing with fully sealed electronics. Optional 3M adhesive tape mounting kit sold separately.

World's smallest LED marker lamp for the transportation industry. The light exceeds legal requirements and is designed as a hardwired lamp easily retrofitted. LEDs draw less current, allowing more power for other vehicle requirements. Electronics completely sealed in epoxy to resist corrosion and moisture. Offers trailer engineers and manufacturers new trailer and rear door structure design flexibility. Requires 3/4" mounting hole, material thickness for flange is 040"- 250", material thickness for crommet is 125" - 250".

Back-up Light housing for new style Century & Vulcan modular bodies. Fits 2008 and newer. Right side.

Safely secure lights to your truck with this Rectangular Black Vinyl Grommet. Made for 5" Rectangular Signal Body Lights.