Truck Lights

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

LED Back-Up Lights feature sealed-body construction to keep out moisture and internal LEDs for a long life. 12V DC.

Twist on Dual Revolution Marker to Auxiliary LED Light with reflector. Designed to fit standard 3/4" hole (will not fit Aerodynamic Trucks). Includes chrome bezel and 2 gaskets with 3 male bullet plugs.

Upgrade your vehicle's license plate illumination with the Maxxima LED License Light. This compact and durable light features an aluminum housing and a stainless steel chrome cover, ensuring long-lasting performance and protection against harsh conditions. With its DOT FMVSS108 compliance and adherence to industry guidelines, you can trust this light to provide consistent and reliable illumination. Its energy-efficient LED technology not only saves you money in the long run, but also contributes to a greener future. Installing the Maxxima LED License Light is a breeze, and its compatibility with various vehicles makes it a versatile choice. Experience optimal lighting with the clear and focused illumination provided by the acrylic lens. With a 5-year warranty included, your investment is protected. Upgrade your license plate lighting today with the Maxxima LED License Light and enjoy enhanced visibility, durability, and energy efficiency.

Kit includes a clear lens with red LED's beehive clearance marker light, M50950 pigtail & M50300-B rubber grommet. PC-rated clearance lights combine special optics into the design so that when mounted on a 45 degree angle it produces a 90 degree angle of light left and right of center. PC-Rated lights eliminate the need for a clearance light on either side, as is the case with traditional clearance lights.

The New MHLE Series is the perfect forward lighting solution for Fleets and Owner Operators alike. With 100% Polycarbonate construction for the Lens & Body. The lights are ultra light weight compared to traditional metal housings. The lens are hard coated with SilFORT UVH3000. All lamps have built in 3 Pin Male H4 connector.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

1 Wire backup light kit with tail. This product replaces part number BL-187.

New Ford Platinum Series Kits includes 5 Lights Flasher with harness all connectors and 2 switches. 50% brighter than later models. Fits 1999-2016. Models F250-F750.

Innovative optic design allows one PC-rated lamp the ability to function as two. Draws less current, allowing more power for other vehicle requirements. Uses standard mounting holes and accessories. PC-rated lamps have 8 diode pattern.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

Sealed 12V DC body lights feature internal LEDs for rugged durability and extra-long life.

Buyers Products 6 Inch Oval Backup Light with 24 LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations. The light has a clear lens and uses a standard PL-2 connection.

This Whelen Engineering product is a replacement 3" round LED flasher.

Maxxima 7" Round Dual Beam LED Headlamp part of the MHLE series is the perfect forward lighting solution for Fleets and Owner Operators alike. With 100% Polycarbonate construction for the Lens & Body. The lights are ultra light weight compared to traditional metal housings. The lens are hard coated with SILFORT UVH3000. All lamps have built in 3 Pin Male H4 connector. 12 LED's, 400 Low 1100 High Lumens, Auto Select 12/24VDC Voltage, 3 Pin Male H4 Connector, 1.6A 12V / 0.8A 24V Amp Draw, DOT SAE HL Legal Heading, FMVSS-108 and CMVSS-108 Compliant, SillFORT Hard Coated Lens, Polycarbonate Lens & Housing, Retrofits ANSI# 6014, 6015, 6016, H6024, 3 Year Warranty.

This LED Trailer Light features 12 stop/tail/turn LEDs and marker light with 6 LEDs. Both have rugged acrylic lenses, a high-impact housing and two mounting studs on the back. Gasketed lenses prevent water from reaching the LEDs making this a submersible trailer light. 6-1/4"W x 4-3/4"H x 3-1/2"D. 12V DC.<BR<BR

Vertical Mount back up light

Less Current draw, resulting in increased battery and alternator life while allowing more power for other vehicle requirements. Electronics completely sealed in epoxy to resist corrosion and moisture.

Most advanced and cost effective 2-1/2'' clearance and marker lamp. SAE PC-rated for combination clearance/marker applications. Flange gasket available for additional protection. Electronics completely sealed in epoxy to resist corrosion and moisture.

Truck-Lite SS605 is a 6 oval, red LED Stop/Tail/Turn light with two lens color options. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance performance. Featuring a unique display array, this extremely bright light provides more visibility, and its quality construction ensures performance and longevity for lower overall operating costs. Available in clear or red, the polycarbonate lens snaps in place with housing locks, and the electronics are encapsulated with epoxy for a weathertight seal.

The NEW LoPro series Wireless Solar-powered marker cab light system is revolutionary to the marketplace and gives you sharp and bright LED Cab lights on your vehicle, but with no drilling, no holes, no wiring, and no problems! Eliminate water leakage, corrosion on your roof, and major issues with wired kits.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

This is a 6" oval backup light by Buyers Products. This light features 6 LEDs and runs on 12 volt power at a .15 amp draw. These lights are recessed mounted and have a polycarbonate lens.

These marker to auxiliary LED G4 lights are industry leading dual revolution lights. They are D.O.T. compliant to auxiliary function all in one. It is built with a polycarbonate lens which is resistant to cracks and damage.

The 1-1/4" Clearance Marker and Flashing Warning Light by Maxxima comes packed with an impressive array of features to ensure superior performance and functionality.